This thermostat (Dryer Operating Thermostat, Dryer Cycling Thermostat, Cycling Thermostat, Dryer Thermostat) is used to maintain a temperature of 155 degrees in the dryer drum. The internal bias heate...
This dryer door switch is a simple on/off switch mechanism that prohibits the dryer from operating when the door is open, and operates the drum light. White in color and 6.5 inches long, this OEM swit...
This white OEM dryer door handle is used to open and close the dryer's door. Comprised of plastic and 6-by-2-inches in dimension, the handle is sold individually and attaches to the dryer door. Your d...
This drum support roller is sold individually. Most dryers require two. The tri-rings are included. This is a drum support roller for a dryer. It is a genuine replacement part. The part includes the d...
If your dryer will not heat, takes too long to dry, or does not provide enough heat, you might want to replace your igniter kit. This silicone carbide igniter with ceramic holder kit includes the 3-in...
If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pul...
If your gas dryer is not heating up or igniting, then replacing the flame sensor, located in the burner assembly, could solve it. This part senses heat from the igniter to monitor if it is hot enough ...
If your washer shakes or vibrates loudly when it reaches its max speed, check that the leveling legs are even. To ensure that the washer is firmly on the ground using all four legs, adjust the legs so...
This manufacturer-certified dryer lint filter is used to collect lint during the dryer cycle, to prevent damage to the machine and to prevent lint from sticking to clothes. This model comes in white a...
This seals Includes adhesive. This part helps seal the drum to prevent hot air from escaping.
$64.63
In Stock
Questions And Answers for MGDC215EW2
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
8 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Colleen
June 7, 2023
I am looking for the switch on the door that lets the dryer turn on and off. Do you have this available
For model number MGDC215EW2
Hello Colleen, thank you for contacting us. The switch you are looking for is a door switch, part number PS11756443. We hope this helps!
Dryer turns on and heats but after 15 minutes it shuts down, you have to open door and let it cool down or if you wait a while it will restart on its own if you don’t open the door up, 2 months ago I disassembled the vent tube and cleaned thought that was it. Still does it. Thanks in advance for any advice!
For model number MGDC215EW2
Hi Don, thank you for getting in touch. Based on our understanding of the issue, we would suggest checking the cycling thermostat, part number PS11741405, to solve the problem. Glad to be of assistance!
Timer does not advance or shut off
Clothes dry.
Had washer and dryer near 5 years.
13.8 ft of running vent
For model number MGDC215EW2
Hello Sheryl, thank you for reaching out. We looked into your model and found that the issue is probably with the timer, part number PS11749830. We recommend checking the timer; if it is faulty, replace it. We hope that helps!
I need to replace the timer as the stem broke from the knob when I tried to start the drying cycle
For model number MGDC215EW2
Hello Mary, thank you for the question. The timer, part number PS11749830, is compatible with your model. If you require assistance to place an order, please contact customer service!
HOW DO I. MAKE THE DRYER STOP WHEN THE CYCLE IS DONE? AFTER A FEW MINUTES, IT STARTS UP AGAIN AUTOMATICALLY. I ASSUME THIS IS TO ASSIST IN WRINKLE CONTROL, BUT ONCE THE CLOTHES ARE DRY, I DON'T WANT THE DRYER TO START UP AGAIN. I WANT IT TO STOP WHEN THE SET CYCLE IS DONE.
For model number MGDC215EW2
Hi Tracey, thank you for reaching out. Based on our understanding of the issue, we would suggest replacing the timer, part number PS11749830, to solve the problem. It controls the electrical components and the duration of the dryer cycles. We hope this helps!
Pryed dryer top open and opened front door. . Unscrewed the 2 retaining screws. Pulled old switch from the wiring harness. Put new switch in place and replaced the retaining screws. Put new switch wire plug into the wiring harness. Before closing top, checked door switch function with dryer on. Dryer cut off when door open an
... Read mored when closed dryer started normally. . . Maint. Note instruction book should warn that letting door slam, which I did on occaision, broke the switch arm. Might save future problems.
It was simple once I figured out what to do:). I removed the 2 screws on the top of the dryer... they were a bit hard to find. Even with the other descriptions on this site. I was removing things I didn't need to. The 2 screws you need to remove are under the LINT COLLECTOR LID. Remove those 2 screws & lift the lid... it will be tigh
... Read moret at first. the front of the lid has 2 "catches" in the corners.
The hardest part was getting the door switch assembly to "unplug". We pried it off -- eventually -- & then simply plugged in the new one.
Saved me LOTS of money & was worth the 30 minutes - 1 hour of work.
As I said previously, once you realize how to get the lid up & manage to pry off the plug, that's all there is to it -- easy!
