Enter the code USA15 at checkout to apply your discount. Discount will be applied at checkout when the code is entered & applies to all parts. Cannot be combined with any other coupon or special offer & cannot be applied to a previously placed order. Not valid toward tax or shipping & handling. Discount has no cash value. Discount expires on July 4 at 11:59pm EST.
You've Got 10% Off Your First Order!Save 10% with code at checkout *click to copy coupon code
The rack track stop on your dishwasher is designed to stop the dish rack at the appropriate place when opening and closing the rack. If your dishwasher is not cleaning your dishes properly, the rack s...
This part is a door balance link kit, also sometimes known as door cable or door spring cable kit, that helps support the door as it opens and closes by connecting to the dishwasher door hinges. The k...
The mounting bracket is sold individually, without screws. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking,...
The tine pivot clip, also known as the tine row pivot, is used in dishwashers and is located in the upper dishrack. At around 3 inches in length, the clip is used to keep the tine row in place in the ...
This silverware basket holds utensils in your dishwasher. If it becomes damaged or goes missing, you can replace it with this part. No disassembly is required to replace this part; simply remove the e...
This part is used as a safety device to protect the dishwasher circuit from overload. If the temperature gets to high it will shut off the electrical current to the heating unit in the appliance. Als...
This is a chopper assembly or drain food chopper, and it is designed for your dishwasher. The chopper chops up/minces the food particles in your dishwasher to prevent them from clogging the pump. You ...
This drain pump is used in dishwashers to remove water from the dishwasher tub. If the impeller in the dishwasher is damaged or the motor has been shorted out and will not drain, it is possible the bo...
This is a door seal, but you may also know it as a door gasket and it is a part for your dishwasher. It provides a leak proof seal between the tub and the door of your appliance. You will need to repl...
$94.61
In Stock
Questions And Answers for KUDS30IVBL3
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
9 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sharon
April 4, 2023
How do you clean the filter in this model of dishwasher? The new ones have a filter that is easily accessible.
For model number KUDS30IVBL3
Hi Sharon, thank you for reaching out. We have attached a video that will help you find the location and clean the filter in this model. To clean the filter, use warm water with dish soap and give the filter a good scrub with a soft-bristle brush, and then rinse. We hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Milford
December 16, 2019
Heavy duty starts blinking on its own will not reset and unit will not work. It may stop on its own after along time then start again
For model number KUDS30IVBL3
Good Day Milford. Thank you for your question in regards to your unit (Model Number KUDS30IVBL3). We will follow up with you via email shortly with some information that may assist you. Best Regards.
Was this helpful?
Thank you for voting!
Deborah
February 12, 2020
Our dishwasher won’t start. We tried shutting it off at the breaker awhile, to see if it would reset. No luck. Any suggestions?
For model number KUDS30IVBL3
Hi Deborah,
Thank you for your question. If the dishwasher will not start, there are some parts that you will need to check to see which one is causing the issue. You will need to check the bi-metal fuse, door switch, high limit thermostat, the circulation pump and motor, the door handle, the heating element, the sump and motor assembly and the electronic control board. We hope this helps. Thank you and have a great day.
Was this helpful?
Thank you for voting!
Jere
October 27, 2022
Dishwasher started blinking some time ago now it won't start tried resetting to no avail.
For model number KUDS30IVBL3
Hello Jere, thank you for reaching out. According to our research, we would recommend checking the following parts to fix your issue: Bi-Metal Fuse, part number PS2360984, Thermostat, part number PS11743423, Circulation Pump and Motor, part number PS11757388, and Heating Element, part number PS11748194. If you require assistance to place an order, please contact customer service. We hope that helps!
Occasionally the dishwasher drips a brown liquid (no oil smell) from just behind the left front of the door panel. When I reach way underneath I can touch a wet foam that I assume is the front panel insulation. When it doesn't drip the foam is also very wet. The brown drips I assume is because a wet black/brown foam would drip brown. What parts would fix this ??
For model number KUDS30IVBL3
Hello Kenn, thank you for your question. Our research indicates that water is getting inside door and sound deadening material is washing out. You will need to remove door panel and locate the source of the leak( a common place is the dispenser). We hope this helps.
Pulled dishwasher from under counter, attached link to spring, hooked spring back into frame/chassis, threaded link through pulleys, attached other end of link onto door, reinstalled dishwasher under counter. All's well. Note-I purchased an extra link anticipating that the other one will fail. They're cheap enough.
Caviat: The actual repair is less than 15 minutes, but I spent a lot of time playing with it before I figured out it was that easy and fast. You don't need to remove the dishwasher from the counter to do this. And it will probably help to look at the new part closely so you can understand where the retainer clip is to press it and release
... Read more the old pump.
First remove the water from the dishwasher pan that would not drain with a wet/dry vac. Otherwise the water will all drain on the floor when you remove the pump. Then remove the two screws on the kickplate on the front of the unit below the door. Remove the kickplate/maintainence access cover. The drain pump is on the right about 8 inches in. Using two hands you grasp the drain pump with your right hand and use the left hand to push the retaining clip down. Then the drain pump will rotate 1/4 turn counterclockwise and can be removed without pulling the dishwasher out. There is likely to be some water leak out that was traped in the pump housing that you can not reach with the vac. Disconnect the wire. Connect the wire to the new pump, put it in place and 1/4 turn clockwise to install it. Replace the kickplate and you're done.
Rather than remove the pump assembly - as an earlier post had done - I pulled the entire dishwasher out and laid it down on the floor. This allowed easy, direct access to the motor (that was the hard, messy part). From this point it was easy. Unplug the wiring, remove the retaining bolt, rotate the motor off the mounting brackets and pull
... Read more it out. Then put the new one in. That was the easy part (about 15 minutes). The entire job took 2-and-a-half hours, most of which was taken in disconnecting, cleaning up and reconnecting the dishwasher. It's much quieter now.