Make sure you haven't got the discount earlier.
Parts That Fix General Electric Washer HTW240ASK4WS Will not agitate
Will not agitate is a commonly reported symptom for the HTW240ASK4WS General Electric Washer, and we have put together a full guide on how to fix this. This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your HTW240ASK4WS General Electric Washer that will fix Will not agitate. We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!
This is an agitator assembly for washing machines. Agitators are used within top load washing machines to move back and forth and effectively wash your clothes. However, if the agitator currently in your washing machine is damaged and/or worn out, it needs to be replaced for your washing machine to operate properly. Replacing this agitator assembly will require a wrench, and for you to turn off the power and water supply for your washing machine. This agitator assembly is an OEM part that is sold individually and does not come with any other parts or accessories.
Customer Repair Stories
Agitator drive splines were stripped so the clothes were not getting clean at all
-
Cheryl from DUDLEY, GA
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
Agitator wore out over time and needed to be replaced
-
MICHAEL from LK PEEKSKILL, NY
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
This lid lock, also known as a door lock, is a genuine OEM replacement part for your washing machine. The lid lock keeps your washer lid closed during the washing cycle. If this part is broken, your washer may not run because it thinks the door is open, or it will not keep the door locked during the wash cycle. To replace this part, make sure you disconnect power to the appliance and wear work gloves.
This is a drive belt for various models of dryer. This belt is responsible for allowing the drive motor to rotate the dryer drum. Over time and with use, this belt will wear out and if it becomes damaged, it will no longer be useable and must be replaced. This belt is made of durable rubber and measures approximately 23 inches long. Please note that your existing belt may measure longer than this replacement belt; this is normal and is due to stretch the belt undergoes over time and use. Replacing this belt will require some disassembly of your dryer and will require a screwdriver and wrench to remove and install. This dryer drive belt is sold individually and does not come with any other parts or accessories.
Customer Repair Stories
Noisy spin, no agitation.
-
Henry from OKANOGAN, WA
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers, Socket set
This is a mode shifter or shift actuator for models of washing machine. Mode shifters are designed to change the function of the washing machine motor, between spinning cycles and agitation, and is usually installed at the bottom of the washer. If your washing machine is not spinning or agitating during its washing cycle, or if it simply does not start, this shift actuator is likely bad and in need of replacing. This shift actuator is made mostly of plastic, and features two holes to secure it with screws, as well as a single wire harness that connects within your washing machine. This shifter is an OEM part and is sold individually.
Customer Repair Stories
washed well but would not shift out of spin cycle
-
terry from MILLINGTON, TN
-
Difficulty Level:Very Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Socket set
This is a clutch for your washing machine. The clutch is made of a white plastic material and is used within washing machines to engage and disengage the transmission during the wash and spin cycles, and ultimately help spin the basket of the tub so your clothes finish damp and not soaked. If your washer has issues with spinning or agitating, this part is likely broken or has worn out, and will need to be replaced. To replace this part, some disassembly of your washer will be required, and tools like a screwdriver and socket wrench will be needed. This clutch is sold as an individual and does not come with any other parts.
Customer Repair Stories
Bolt broke in half
-
Rachel from WAXHAW, NC
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
This lid lock striker is sourced directly from the manufacturer for use in top-load washing machines. It is a white, plastic component located on the underside of the washing machine lid. When the lid is closed, the lid lock striker engages with the lid lock assembly. This ensures that the lid remains securely closed while the washer is in operation, preventing the lid from being opened accidentally and potentially causing safety hazards. The lid lock striker is an important safety features that helps to prevent injury or damage while the washer is running. If the striker is broken or no longer functioning, the door will be unable to stay shut, and the washer may not start or may it stop running mid cycle.
Customer Repair Stories
Washer would not advance to Wash
Thank you for the super fast service on Christmas eve no less!
-
Garry W. from TAMPA, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
Don’t do this, but we prop the washer lid open so it doesn’t get musty between use; we put a sock or something in there to prevent the striker fro closing. When a family member hops up on the washer to get to the highest shelf in the laundry closet it snaps! And the. The washer won’t function.
Just unscrewed the two screws with a Phillips, slid the old one out, the new one set in perfectly, and used the same screws to hold it in place. 2 minute task total.
-
Heather from CHARLESTON, IL
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
This is a speed sensor for a variety of washing machine models. Speed sensors are used to monitor the speed of the washer drum and communicate it to the electronic control board to slow or quicken it. If this speed sensor is damaged or bad, it will cause your washer drum to rotate too quickly, slowly, or inconsistently. Replacing this sensor will require a screwdriver and some minor disassembly of your washing machine. This sensor is an OEM part and is sold individually, so it does not come with any other parts or accessories.
Customer Repair Stories
Washer not spining
Unplugged and unsnapped speed sensor and replaced with new one . Washer spinning like it should. Problem solved
-
william from MARIETTA, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set, Wrench (Adjustable)
This is a motor pulley and nut combo kit for your washing machine. This pulley is used within the transmission of your top-load washing machine to spin and agitate your clothes. If you notice your washing machine is not cleaning as effectively as it used to, check this pulley underneath your washer. It may be worn out and no longer able to effectively rotate the pulley, and successfully activate the agitator as a result. This OEM pulley and nut combo are the only parts included, and some disassembly of your washing machine is required to replace them.