This genuine OEM drain pump is designed for use in washing machines. It removes the water out of the washing machine during the drain cycle. The drain pump can fail if it is clogged with debris or due...
$78.97
In Stock
Order within the next 11 hrs and your part ships today!
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jason
March 8, 2023
Washer works fine but when it goes into the dry cycle, it heats up but pushes water into the tub and the clothes are soaked!
For model number HLC1700AXW
Hi Jason, thank you for contacting us. According to our research, we would recommend checking the cycle control knob, part number PS12343347. Also, the electronic control board, part number PS12343401. It manages the operation of the laundry center such as cycle times and temperatures. We hope this information helps!
Code fc.Fill pump out motor wont run for wash or spin replace control board and motor board
For model number HLC1700AXW
Hello Robert and thanks for writing.
The error code FC means No feedback signal from the driver unit. This issue requires Service technician. We suggest to try a hard reset:
Go to your breaker box and shut the breakers for your unit off, wait 5 minutes and then turn the breaker to on again. That should clear this problem. We hope this helps. Please contact us anytime.
Was this helpful?
Thank you for voting!
Omar
November 4, 2021
My machine start drying and then send me this code Fd. Who can I fixed or I need a the cnicina?
For model number HLC1700AXW
Hello Omar, Thank you for the question. The Fd Error Code indicate the Dryer heating is abnormal. We suggest testing the Heater for continuity. We hope this helps!
Was this helpful?
Thank you for voting!
Angelo
January 18, 2024
Fixing a F9 error code problem
For model number HLC1700AXW
Hello Angelo, thank you for reaching out. According to our research, this error code indicates that there is a problem with the dryer temperature sensor, part number PS12342918. You may need to replace it to fix the issue. We hope that helps!