This broil element is found on the roof of ovens and ranges, it generates the heat required for the broil function of your appliance. If your oven will not get hot when the broil function is selected,...
$234.60
In Stock
Order within the next 1 hr and 13 mins and your part ships today!
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Larae Reinson
February 21, 2020
Which burner caps do i need for this model? I see there are different options.
For model number HDS255C
Hello LaRae,
Thank you for your question. There are 6 caps listed under the model number. The burner caps, will be labeled burner caps, while the ones that say "cap" are for the side of the control panel. They are under part numbers: PS8713604, PS8713602, PS8713600. The right front burner cap, part number PS8713609 has however, been discontinued by the manufacturer. We hope this helps you.
Step 1: Call the appliance store and ask the repairman to look at the problem. Step 2: Wait 10 days. Step 3: Have repairman tell you the broiler element stopped working. He states he will order the new part and charges $80 for the visit. Step 4: Wait 4 weeks, then call the repairman and have him tell you the part is backord
... Read moreered. Step 5: Wait another 4 weeks, periodically calling the repairman to be told assorted stories about the backordered part. Step 6: Go to partselect.com, and within 10 minutes order the part. Step 7: Receive the part in 2 DAYS. Step 8: Remove the old broiler element (only 4 screws to remove) and slide off the 2 electrical connections. Step 9: Connect the new broiler element, push the electrical wires back into the panel and replace the 4 screws. Step 10: Tell the repairman to go to ****