Models > HA3000W

HA3000W ((PRE.B3533858)) Magic Chef Washer - Overview

Sections of the HA3000W

[Viewing 1 of 1]
Diagram and Parts List for (PRE.B3533858) Magic Chef Washer
Keep searches simple, eg. "belt" or "pump".
Upper/Lower Bearing – Part Number: WP40004001
Upper/Lower Bearing
PartSelect #: PS11742241
Manufacturer #: WP40004001
Bearing only.
$56.54
  In Stock
V-Style Cogged Pump Belt (22.5 inches long) – Part Number: WP27155
V-Style Cogged Pump Belt (22.5 inches long)
PartSelect #: PS11740600
Manufacturer #: WP27155
This V-style cogged tooth pump belt is used in conjunction with the drive belt in your washing machine. This belt is all black in color and is made entirely of rubber. It is twenty-two and a half inch...
$39.78
  Special Order
Four Port Washer Pump with Metal Pulley – Part Number: 31968
Four Port Washer Pump with Metal Pulley
PartSelect #: PS2034287
Manufacturer #: 31968
The metallic pulley attached to this pump. This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time.
  No Longer Available
Two Speed Motor – Part Number: 27179P
Two Speed Motor
PartSelect #: PS2027998
Manufacturer #: 27179P
This two speed motor performs 1725 revolutions per minute in one speed, and 1140 revolutions per minute in the second speed. It runs at 1/2 horsepower and carries 115 volts. You can use this washer mo...
  No Longer Available
KIT, IDLER – Part Number: R9900487
KIT, IDLER
PartSelect #: PS2174576
Manufacturer #: R9900487
  No Longer Available
DISCONTINUED – Part Number: 33521
DISCONTINUED
PartSelect #: PS2036941
Manufacturer #: 33521
  No Longer Available
DISCONTINUED – Part Number: 27249
DISCONTINUED
PartSelect #: PS2028031
Manufacturer #: 27249
  No Longer Available
DISCONTINUED – Part Number: 27602
DISCONTINUED
PartSelect #: PS2028090
Manufacturer #: 27602
$7.73
  Special Order
DISCONTINUED – Part Number: 356P3
DISCONTINUED
PartSelect #: PS2038729
Manufacturer #: 356P3
$155.09
  Special Order
DISCONTINUED – Part Number: 208124
DISCONTINUED
PartSelect #: PS2017514
Manufacturer #: 208124
  No Longer Available
DISCONTINUED – Part Number: 27120
DISCONTINUED
PartSelect #: PS2360178
Manufacturer #: 27120
  No Longer Available
USE SPE 28918P – Part Number: 28918
USE SPE 28918P
PartSelect #: PS2360180
Manufacturer #: 28918
  No Longer Available
View More
Back to Top

Questions And Answers for HA3000W

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Back to Top

Common Symptoms of the HA3000W

[Viewing 1 of 1]
Will not drain
Fixed by
these parts
Fixing
Show All
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Washer stopped pumping discharge water
The only real problem was one spring loaded hose clamp to the rear of the pump. If it had been a standard clamp like the others I would have cut the repair time down by 2/3rd's. I did find that by removing one of the long wash drum springs, I then had more room to get my channellocks back there to get the stupid clamp to compress, and then used a screw driver to push the clamp back off the the connecting port. I replaced the camp w/ a standard clamp and the reassembly went quick and easy. Note, If you replace the pump drive belt with a new one, you WILL have to adjust the belt tension after a few minutes use.
Read less
Parts Used:
Four Port Washer Pump with Metal Pulley V-Style Cogged Pump Belt (22.5 inches long)
  • Kevin from Grayslake, IL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers
6 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water pump motor belt broke
It was easy, All we had to do was loosen up the tension on the pump, put the new belt back on and put the tension back on the pump motor by sliding it to the side and re tighten the screws to hold the pump tight.
Parts Used:
V-Style Cogged Pump Belt (22.5 inches long)
  • Scott from ROUND LAKE PK, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Wrench (Adjustable)
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water Pump Started Leaking
Removed the old pump and installed the new one, works great!
Parts Used:
Four Port Washer Pump with Metal Pulley
  • CATHERINE from WEST CHESTER, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Wrench set
3 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top