Enter the code USA15 at checkout to apply your discount. Discount will be applied at checkout when the code is entered & applies to all parts. Cannot be combined with any other coupon or special offer & cannot be applied to a previously placed order. Not valid toward tax or shipping & handling. Discount has no cash value. Discount expires on July 1 at 11:59pm EST.
You've Got 10% Off Your First Order!Save 10% with code at checkout *click to copy coupon code
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Drain pump failed
Remove back cover and with a light and a mirror the screws can be identified. Three hold this pump on. Remove electrical connection then the pump. So also remove the corrugated connecting boot by undoing three clamps. Clean and reassemble
Power spike caused the control not activate motor on drum.
I downloaded a service manual for $9.95 online that lead me step by step to the board.I order the board from another supplier but it was back ordered for 4 to 6 weeks. Was lucky to find Partselect. They had the part in stock with fast shipping.
Front load clothes washer drum shaft seal and bearing failed causing extreme bearing noise
Looked up on YouTube repair procedures and found enough to point me in the right direction. I am experienced in auto and appliance repairs and felt this would be easy even without YT but it helped me prepare tool list as I live 2K miles away from the family. Though YT was not exact machine, it was close enough to get me started as it wasn't rocket science. Once the machine was disassembled and bearings/gasket removed, I found a local bearing supplier which matched parts and started re-assembly. Total machine work time was approximately 7 hours and it runs like new!
A couple of tricks found on YT was putting bearings in freezer prior to assembly for potentially "shrinking" to ease installation, red lock-tite, and using a "good" liquid wrench lubricant for removing the inner rusted bearing.
It's not rocket science and I saved repair technician cost or purchasing a new $1100 washer. My costs were $113, and joy of a successful fix! What did we have to lose!!
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water leakage, inner basket bearing play, motor not running
Replaced outer drum, both halves, inner basket/trunnion assy. , Fan housing from excessive vibration/broken mount tabs. Used multimeter to test rotor position sensor ohms, replaced sensor, machine operating as new now.
Replaced smoked Electronic Control Board, powered up and ran diagnostics. Machine powered up just fine but would fail the drum speed test. Replaced the RPS Module and machine works like new
Replaced the balance ring on the tub but the main tub was cracked and could not be repaired. Parts select was very helpful. Sent me instructions to repair the washer and replaced defective parts from shipping within 2 days. VERY GOOD EXPERIENCE