Enter the code USA15 at checkout to apply your discount. Discount will be applied at checkout when the code is entered & applies to all parts. Cannot be combined with any other coupon or special offer & cannot be applied to a previously placed order. Not valid toward tax or shipping & handling. Discount has no cash value. Discount expires on July 4 at 11:59pm EST.
You've Got 10% Off Your First Order!Save 10% with code at checkout *click to copy coupon code
The drum roller for your dryer holds the drum in place while the drum turns on the support wheels. The drum roller is round with a bearing in the middle and measures approximately 3 inches in diameter...
This thermal fuse acts as a high-limit thermostat, and shuts off the heating element when the dryer overheats by cutting off power to the dryer. If the thermal fuse has blown, the dryer will not start...
This dryer thermistor temperature sensor helps monitor and regulate the temperature inside a dryer. This part includes the wire harness. If your dryer overheats, does not produce enough heat, or takes...
The thermostat is a part for your dryer, and it is roughly 1 inch long by roughly 1.5 inches wide. The purpose of the thermostat is to measure the temperature of the air inside your dryer drum. As the...
This lint filter assembly for your dryer catches lint and debris from your clothes. You can find it near the door. It helps keep the air flowing properly and stops lint from blocking the exhaust ducts...
This is a thermostat for various models of LG dryers. This thermostat specifically is the rear high limit thermostat, and it is designed as a safety device to shut off power to your dryer if the inter...
They are all strung with a coiled wire made of a nickel and a chrome alloy. This wire receives, but resists, a controlled electric current and as a result, the wire heats up. The heat produced is used...
This plastic adjustable dryer leg is used to support the weight and adjust the height of your dryer to keep it level. To install the leg, tip the dryer back and screw it into the bottom of your dryer ...
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
9 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rochelle
February 23, 2020
Dryer does not tumble. No binding. All indications normal. No error codes.
For model number DLEX8000V
Hello Rochelle,
Thank you for your question. our sources suggest replacing the drum support roller and axle under part PS8260240 for your model to fix the tumble issues. We hope this helps.
Trying to fix this one. Takes forever to dry. Timer will fluctuate back up after counting down. Flow sense light on. Had vent system professionally cleaned. Ran selftest and get flow sense light with all 4 bars lit up even with the exhaust hose disconnected. Have disassembled and cleaned all passages and heating element. Blower wheel intact. Has heat in dryer. What should i check next? Don't want to throw parts at it so some test procedures would be nice. Thanks
For model number DLEX8000V
Hello Tom,
Thank you for your question. After all the cleaning and inspection you've done, we suggest testing the timer control board under part PS7793009 for your model using a multi-meter to see if it is defective, and if it would need to be replaced, since the symptoms you listed sound similar to a timer problem. We hope this helps.
Hi Tracy,
Thank you for your inquiry. We do not provide repair services where a technician would go out and fix your dryer, but we do have symptoms lists on our website that you may reference on what parts may fix it. Here is a link from our website that you may reference for information, https://www.partselect.com/Repair/Dryer/. There are also symptoms listed under your model number on our website, that you may look through as well. Or, if you could let us know what is going on with your dryer, we would be happy to check on this for you and provide you with information. We hope this helps. Thank you and have a great day.
Was this helpful?
Thank you for voting!
Brenda
October 13, 2022
Check filter sensor flashing. Dryer will not turn on. I checked hose and there is no blockage.
Tried to reset and it still has error code CL
For model number DLEX8000V
Hello Brenda, thank you for your question. We have researched your code and found that you have the CHILD LOCK function activated on your dryer and all buttons are disabled except the POWER button. To unlock first press and hold the EASY IRON button for 3 seconds to deactivate the CHILD LOCK function. We hope this information is useful.
Was this helpful?
Thank you for voting!
John
April 10, 2023
I need a new wiring harness for this unit
For model number DLEX8000V
Hi John, Thank you for writing. The Wire Harness, PartSelect Number PS7790936 for the Dryer Wire Harness. We hope this helps!
Had to replace front drum support rollers. Removed screws underneath top in back that held bracket that keeps top in place. Slid top towards rear and lifted up. Removed 4 screws that hold plastic front panel in place (inside..2 on each corner) Unplugged front panel electric plugs to remove panel. Opened door..removed 2 screws at bottom of
... Read more door opening. Removed screws on top of front panel. Unplugged door switch plug. Removed front panel. Removed right front roller with 9/16th wrench for nut. Adjustable for back of stud. Lifted up on drum to get roller out. Reversed to install. Left roller a bit harder to get to stud. Removed and installed same as right side. Did not attempt to replace rear rollers. Have them if needed but very much more involved to replace.
I actually went to mr fix it on u tube. Great instruction on how to take dryer apart. First I unplugged the dryer. I found I could reach the heating system by removing the lint tube in the back of the dryer. I put my I phone with the light on inside the back of the dryer and tested the connections to see if all were working. The thermal f
... Read moreuse was not working. I removed the two wires , red on top and white on the bottom. Then used a small Phillips screwdriver to remove the two mounting screws and removed the fuse. I then used a vacuum to clear any lint from the back of the dryer and inside the dryer. This took me about an hour and a half. I did it this way because I did not want to disassemble the entire dryer to get to the components. I received the fuse in 3 days and tested it. It was fine. I then put it in the dryer screwed it in place, connected the wires. Replaced the lint tube. This took about 10 minutes. Dryer is running great.
Found disassembly video and watched several times. Suspected that one of the drum wheels had seized up. Found extreme volume of lint and hair inside unit as well as a dryer sheet melted on top of heating unit. Front left drum wheel was worn down from lint and hair jamming its movement. Video made it easy, not a really complicated piec
... Read moree of machinery. Replaced all 4 wheels due to normal wear on other three. Wanted to be sure drum evenly balanced on all 4. Parts came quickly and were easy to install. My sister and I did this together. Would not recommend doing it alone. Took time to vac and wipe down entire unit. Now it runs so quiet we have to look to see if it is operating. Got a brand new machine out of it, saved a couple of hundred dollars in repair bills, and found 11 cents inside the machine. For your own piece of mind, if you have had your dryer for several years, you need to open it up and clean it out. Its not hard... added note, we are both in our 60's... so if we can do it so can you.... Such a feeling of accomplishment, can't buy that in a store....