Enter the code USA15 at checkout to apply your discount. Discount will be applied at checkout when the code is entered & applies to all parts. Cannot be combined with any other coupon or special offer & cannot be applied to a previously placed order. Not valid toward tax or shipping & handling. Discount has no cash value. Discount expires on July 4 at 11:59pm EST.
Models
>
BVM200FE
BVM200FE Poulan Leaf Blower / Vacuum - Overview
Sections of the BVM200FE
[Viewing 3 of 3]Keep searches simple, eg. "belt" or "pump".
![Fuel Line – Part Number: 530069247 Fuel Line – Part Number: 530069247](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/9472280-1-S-Poulan-530069247-Fuel-Line.jpg)
Fuel Line
PartSelect #: PS9472280
Manufacturer #: 530069247
This is the replacement fuel line 25 Inch for several OPE products that use small engines. The fuel line carries fuel from the tank to the carburetor. Over time, the fuel line can become badly clogged...
$6.62
In Stock
![Engine Fuel Filter – Part Number: 530095646 Engine Fuel Filter – Part Number: 530095646](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/9285148-1-S-Poulan-530095646-Engine-Fuel-Filter.jpg)
Engine Fuel Filter
PartSelect #: PS9285148
Manufacturer #: 530095646
This fuel filter is for lawn and garden equipment engines.
Fuel filter cleans the fuel before it reaches the carburetor.
Work in a well-ventilated area when installing this part. Drain the fuel...
$4.99
In Stock
![Tank Purge Line – Part Number: 530069216 Tank Purge Line – Part Number: 530069216](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/9472264-1-S-Poulan-530069216-Tank-Purge-Line.jpg)
Tank Purge Line
PartSelect #: PS9472264
Manufacturer #: 530069216
This part is the replacement tank/purge line for your outdoor power equipment. It is made of clear plastic and is sold individually. The tank/purge line returns excess fuel from the carburetor to the ...
$6.21
In Stock
![Spark Plug (RCJ6Y) – Part Number: 952030249 Spark Plug (RCJ6Y) – Part Number: 952030249](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/9484195-1-S-Poulan-952030249-Spark-Plug-RCJ6Y.jpg)
Spark Plug (RCJ6Y)
PartSelect #: PS9484195
Manufacturer #: 952030249
The manufacturer-certified white and silver Spark Plug RCJ6Y ignites the air-fuel mixture inside the combustion chamber of your engine. Consult your manual or check your model number to determine if t...
No Longer Available
![Ring-Piston – Part Number: 545154009 Ring-Piston – Part Number: 545154009](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/9482766-1-S-Poulan-545154009-Ring-Piston.jpg)
Ring-Piston
PartSelect #: PS9482766
Manufacturer #: 545154009
This OEM Piston Ring is used to provide a seal between the piston and cylinder wall. It attaches around the piston, inside the groove. It will require a screwdriver, allen wrench, torx wrench and sock...
$3.99
In Stock
![Vacuum Bag Assembly w/ Strap – Part Number: 530095564 Vacuum Bag Assembly w/ Strap – Part Number: 530095564](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/9971436-1-S-Poulan-530095564-Vacuum-Bag-Assembly-w-Strap.jpg)
Vacuum Bag Assembly w/ Strap
PartSelect #: PS9971436
Manufacturer #: 530095564
This OEM Vacuum Bag holds grass and leaf clippings when the blower is switched to vacuum mode, and is attached to the exit port. It is constructed of white fabric. If broken due to wear/fatigue it wil...
$34.86
On Order
![Assembly - Flywheel – Part Number: 545221701 Assembly - Flywheel – Part Number: 545221701](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/11811466-1-S-Poulan-545221701-Assembly-Flywheel.jpg)
Assembly - Flywheel
PartSelect #: PS11811466
Manufacturer #: 545221701
This flywheel is an authentic manufacturer replacement part for use with lawn and outdoor equipment. The flywheel is a heavy, circular disc that has magnets that create an electric charge sent to the ...
$13.69
In Stock
![Fuel Tank (Does not include 530095646 Fuel Filter) – Part Number: 578943308 Fuel Tank (Does not include 530095646 Fuel Filter) – Part Number: 578943308](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/11811508-1-S-Poulan-578943308-Fuel-Tank-Does-not-include-530095646-Fuel-Filter.jpg)
Fuel Tank (Does not include 530095646 Fuel Filter)
PartSelect #: PS11811508
Manufacturer #: 578943308
$24.90
On Order
Questions And Answers for BVM200FE
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Robert
March 10, 2020
What is the purpose of the momentary switch on my Poulan leaf blower and how is it used? Thanks.
For model number BVM200FE
Hello Robert, thank you for your question. This momentary switch is the special switch which turns the unit on and off. If the switch malfunctions the unit will not start. I hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Jay
August 13, 2021
I took apart the leaf blower because it would not start after 10 years of trouble-free use and there was no spark at the spark plug when i removed it and grounded it to the cylinder head and pulled on the starter cord. The ignition coil was intact, but could it be the problem? Does a new coil include all wiring and how much for a new one? Thanks
For model number BVM200FE
Hi Jay,
Thank you for your question. If your blower will not start, there are some parts that you will need to check to see which one is causing the issue. You will need to check fuel filter, the fuel line, the tank purge line, the carburetor and the spark plug. We hope this helps! Good luck with the repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Common Symptoms of the BVM200FE
[Viewing 2 of 2]Will Not Start
Fixed by
these parts
these parts
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/9472280_1_S.jpg)
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/9472264_1_S.jpg)
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/9285148_1_S.jpg)
Show All
Engine stops after a few seconds or minutes
Fixed by
these parts
these parts
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/9472280_1_S.jpg)
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/9285148_1_S.jpg)
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Both the Fuel line and the Engine fuel line, where dry rotted.
1) While still attached to the fuel tank, I first sized up the old fuel lines with the newer fuel lines.
2) With a pair of needle nose players, I then removed the old dry rotted fuel ?? lines, from the fuel tank.
3) I cleaned the fuel tank and around the carburetor area, to insure that there was no debris, that could possibly fa ... Read more ll into the path of the new fuel lines installation.
4) I then installed the smaller one of the fuel lines, so that it would be out of the way, of the larger fuel line. I Pulled the fuel line through the smaller hole in the fuel tank, with needle nose players. I pulled the smaller fuel line out through the fuel tank filler hole, attached the fuel filter to the smaller fuel line. I Made sure that the fuel filter was extended to the furthest end of the fuel tank bottom. Six inches in all. I then attached the smaller fuel line to the carburetor.
5) I Installed the larger fuel line, followed the same procedures as the smaller fuel line.
6) Both fuel lines where cut on an angle for easy installation. No lubricant was necessary.
7) I filled up the fuel tank with fresh fuel and oil, new air filter and spark plug. It started on the first pull. Amazing.
2) With a pair of needle nose players, I then removed the old dry rotted fuel ?? lines, from the fuel tank.
3) I cleaned the fuel tank and around the carburetor area, to insure that there was no debris, that could possibly fa ... Read more ll into the path of the new fuel lines installation.
4) I then installed the smaller one of the fuel lines, so that it would be out of the way, of the larger fuel line. I Pulled the fuel line through the smaller hole in the fuel tank, with needle nose players. I pulled the smaller fuel line out through the fuel tank filler hole, attached the fuel filter to the smaller fuel line. I Made sure that the fuel filter was extended to the furthest end of the fuel tank bottom. Six inches in all. I then attached the smaller fuel line to the carburetor.
5) I Installed the larger fuel line, followed the same procedures as the smaller fuel line.
6) Both fuel lines where cut on an angle for easy installation. No lubricant was necessary.
7) I filled up the fuel tank with fresh fuel and oil, new air filter and spark plug. It started on the first pull. Amazing.
Read less
Parts Used:
-
Victor from SCOTTSVILLE, KY
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Socket set
36 of 45 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fuel and Purge lines had disintegrated
Disassembled it and cleaned fuel tank. Cut and ran new fuel lines, installed filter and reassembled. Parts fit perfectly and got running after not running for over 20 years.
Parts Used:
-
Casper from ERATH, LA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers
21 of 28 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!