We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Judiith
August 4, 2021
I need the latch on the door.The male part only
For model number 970-C98902-00
Hi Judith,
Thank you for your question. The part number listed under your model number for the door strike is PS455020. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
Have replaced the rear drum bearing but after putting it together the drum barely turns.Are there any other drum rollers? I would love a schematic as I put the ball bearing in the hole at the back of the drum
For model number 970-C98902-00
Hello Marvin, thank you for reaching out. The attached video can help you install the ball bearing, part number PS418807. The dryer drum is connected to the dryer motor through the idler pulley, idler arm, and belt. The idler pulley and idler arm maintain the tension on the dryer's drum, which helps it rotate as the motor runs. Your issue could be due to the belt not being properly connected to the idler assembly. You need to check if the dryer motor is running and if the belt, part number PS3408299, is firmly connected to the idler assembly, part number PS11775626. We hope that helps! Please contact us anytime if you require further assistance!