Models > 860E

860E Simplicity Snow Blower - Overview

Sections of the 860E

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Starter Pawl-Ratchet – Part Number: 281505S
Starter Pawl-Ratchet
PartSelect #: PS8942598
Manufacturer #: 281505S
The manufacturer-approved Ratchet Pawl (Starter Pawl) comes in a set of two (2). This part attaches inside the recoil assembly, and is used to engage the flywheel. if broken due to wear/damage it will...
$3.99
  In Stock
Order within the next 7 hrs and your part ships today!
Pulley/Spring Assembly – Part Number: 498144
Pulley/Spring Assembly
★★★★★
★★★★★
(2)
PartSelect #: PS8988822
Manufacturer #: 498144
$20.78
  In Stock
Order within the next 7 hrs and your part ships today!
Connector-Hose – Part Number: 692317
Connector-Hose
★★★★★
★★★★★
(1)
PartSelect #: PS9074730
Manufacturer #: 692317
$7.06
  In Stock
Order within the next 7 hrs and your part ships today!
Seal,Oil – Part Number: 391086S
Seal,Oil
★★★★★
★★★★★
(1)
PartSelect #: PS9277860
Manufacturer #: 391086S
The Oil Seal is a manufacturer-approved rubber part which provides a seal between the crankcase and crankshaft by attaching around the axle shaft on the crankhouse housing. Installation is rated as "M...
$6.59
  In Stock
Order within the next 7 hrs and your part ships today!
Bowl-Float – Part Number: 796611
Bowl-Float
★★★★★
★★★★★
(1)
PartSelect #: PS9306908
Manufacturer #: 796611
$7.13
  In Stock
Order within the next 7 hrs and your part ships today!
Gasket-Float Bowl – Part Number: 693981
Gasket-Float Bowl
PartSelect #: PS9064482
Manufacturer #: 693981
$4.99
  In Stock
Order within the next 7 hrs and your part ships today!
Key-Flywheel – Part Number: 222698S
Key-Flywheel
★★★★★
★★★★★
(1)
PartSelect #: PS8925657
Manufacturer #: 222698S
$4.99
  In Stock
Order within the next 7 hrs and your part ships today!
Fuel Filter – Part Number: 394358B
Fuel Filter
PartSelect #: PS17016257
Manufacturer #: 394358B
This Fuel Filter is a white plastic part attached within the fuel delivery system between the fuel tank and carburetor. Installation is rated as "Easy" and requires a set of pliers and a screwdriver. ...
$3.99
  In Stock
Order within the next 7 hrs and your part ships today!
Screw, Hex Washer Head, Muffler Guard – Part Number: 699854
Screw, Hex Washer Head, Muffler Guard
PartSelect #: PS9295215
Manufacturer #: 699854
$3.99
  In Stock
Order within the next 7 hrs and your part ships today!
Plug--Spark – Part Number: 691043
Plug--Spark
PartSelect #: PS9062708
Manufacturer #: 691043
$6.83
  In Stock
Order within the next 7 hrs and your part ships today!
Washer-Sealing – Part Number: 271716
Washer-Sealing
★★★★★
★★★★★
(1)
PartSelect #: PS8940580
Manufacturer #: 271716
$4.99
  In Stock
Order within the next 7 hrs and your part ships today!
Seal-Dipstick Tube – Part Number: 281370S
Seal-Dipstick Tube
★★★★★
★★★★★
(2)
PartSelect #: PS9274579
Manufacturer #: 281370S
$8.91
  In Stock
Order within the next 7 hrs and your part ships today!

Questions And Answers for 860E

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Mistreated Briggs & Stratton 206 CC Engine on MTD Chipper
Removed tank and drained old gas.
Removed and disassembled carb. Needed new gaskets and seals, and had to clean corn syrup glaze (separated ethanol) from bowl and everywhere else with carb cleaner.
Throttle linkage was de-plating/rusty. Steel wool and WD40 got it moving again.
Cleaned spark plug electrode.
Reassembled, poured Sea Foam in the bottom of the tank and gave it a few pulls.
Let Sea Foam sit for a while, then filled the tank with Premium.
Blew white smoke for a minute then ran like new. Shredded for a while, then changed the oil.
Parts Used:
Kit-Carb Overhaul
  • Dana from HAMMOND, IN
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!