Models > 6432A

6432A Norge Washer - Overview

Models starting with 6432A

Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Drive Belt - 51 inches long – Part Number: WP21352320
Drive Belt - 51 inches long
★★★★★
★★★★★
(25)
PartSelect #: PS11738882
Manufacturer #: WP21352320
This V-style drive belt measures 51 inches long and 3/8 inches wide. The belt is made to slip on the motor pulley to bring the basket up to the speed required. Continued use can result in the belt suf...
$10.97
  In Stock
Drain Pump with Pulley – Part Number: WP35-6465
Drain Pump with Pulley
★★★★★
★★★★★
(24)
PartSelect #: PS11741799
Manufacturer #: WP35-6465
This drain pump with pulley, also known as the washing machine drain pump assembly, is a pump with two ports. The function of this pump is to help expel water from your washing machine. The pump is ac...
$84.55
  In Stock
Snubber Ring – Part Number: WP21002026
Snubber Ring
★★★★★
★★★★★
(16)
PartSelect #: PS11738845
Manufacturer #: WP21002026
The snubber ring is a piece that is specific to your washing machine. The function of the snubber ring is to reduce noise and vibrations within your washer. It fits in between the leg and the dome ass...
$13.09
  In Stock
Transmission Pulley and Bearing Kit – Part Number: 12002213
Transmission Pulley and Bearing Kit
★★★★★
★★★★★
(16)
PartSelect #: PS2003651
Manufacturer #: 12002213
This transmission pulley and bearing kit, also known as thrust bearing kit or washer pulley and bearing kit, includes the pulley, washer, thrust bearing, two upper race washers, and one lower race was...
$69.76
  In Stock
Screw, 8/18 x 3/8 – Part Number: WP90767
Screw, 8/18 x 3/8
★★★★★
★★★★★
(2)
PartSelect #: PS11746840
Manufacturer #: WP90767
This screw is sold individually.
$5.41
  In Stock
Hose Clamp – Part Number: WP596669
Hose Clamp
★★★★★
★★★★★
(1)
PartSelect #: PS11743008
Manufacturer #: WP596669
This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This ...
$11.77
  In Stock
Screw – Part Number: WP489483
Screw
★★★★★
★★★★★
(1)
PartSelect #: PS11742755
Manufacturer #: WP489483
This screw is sold individually.
$13.07
  In Stock
Screw – Part Number: WP3196164
Screw
★★★★★
★★★★★
(3)
PartSelect #: PS11740978
Manufacturer #: WP3196164
This screw is sold individually.
$7.67
  In Stock
Screw – Part Number: WP25-7893
Screw
PartSelect #: PS11740549
Manufacturer #: WP25-7893
This screw is less than an inch long. It is a metallic screw that is used for many clothes washers. Sold individually.
$8.04
  In Stock
Lid Switch Actuator - Black – Part Number: WP43-0057
Lid Switch Actuator - Black
★★★★★
★★★★★
(4)
PartSelect #: PS11742355
Manufacturer #: WP43-0057
This is part of the lid switch actuator mechanism and activates the lid switch, when the lid is closed, to start the wash cycle and when the lid is open, it stops the cycle.
$56.97
  In Stock
Inlet Hose - 5 FT – Part Number: WP89503
Inlet Hose - 5 FT
★★★★★
★★★★★
(3)
PartSelect #: PS11746820
Manufacturer #: WP89503
This hose can handle hot or cold water and is five feet long.
$21.51
  In Stock
Leveling Leg and Pad – Part Number: 25001119
Leveling Leg and Pad
PartSelect #: PS2026623
Manufacturer #: 25001119
This part includes locknut.
  No Longer Available
View More
Back to Top

Common Symptoms of models starting with 6432A

[Viewing 9 of 9]
Leaking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Burning smell
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will not drain
Fixed by
these parts
Fixing Fixing Fixing
Show All
Spins slowly
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will not agitate
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
No hot or cold water
Fixed by
these parts
Fixing
Show All
Spinning Issues
Fixed by
these parts
Fixing Fixing
Show All
Shaking and Moving
Fixed by
these parts
Fixing
Show All
Back to Top
Replacing the Drive Belt - 51 inches long

Replacing the Drive Belt - 51 inches long

Replacing the Transmission Pulley and Bearing Kit

Replacing the Transmission Pulley and Bearing Kit

Replacing the Snubber Ring

Replacing the Snubber Ring

Replacing the Hose Clamp

Replacing the Hose Clamp

Replacing the Drain Pump with Pulley

Replacing the Drain Pump with Pulley

Replacing the Inlet Hose - 5 FT

Replacing the Inlet Hose - 5 FT

Replacing the Transmission Lower Lip Seal Repair Kit

Replacing the Transmission Lower Lip Seal Repair Kit

Replacing the Lid Switch Kit

Replacing the Lid Switch Kit

View More
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
washing machine was making alot of noise
I found the water pump bearings were going bad from humidity. I replaced the pump with a new one and it runs quiet again.
Parts Used:
Drain Pump with Pulley
  • David from Boca Raton, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers, Wrench set
561 of 572 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Load Grinding/Rubbing Noise in Rinse and Spin Cycles
First unplug the washer for the electrical outlet. You will need to tip the washer back to get to the bottom of the machine. There you will see the belt that drives the transmission and the water pump from the motor. Remove the belt and set it to the side. Then you will need to gain access to the top side of the machine by gently using a screwdriver to pry the front of the top up off the front panel on both sides then hinge it back out of the way. Use a nut driver to remove the two screws on the inside edge of the front panel and remove the front panel. Once the front panel is off you will see the water pump on the right hand side as you face the front of the machine. Remove the hose clamp on the water pump with the flat head screw driver or nut driver and use a pair of pliers to remove the compression clip on the water pump. Remove the 4 bolts holding the water pump in place. Reverse the entire process to put it back together. This job was very easy and I was only without a washer for 2 days because of partselect.com.
Read less
Parts Used:
Drain Pump with Pulley
  • Doug from Port Richey, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
139 of 151 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Pump Making Horrible Noise And Brake Stuck
The pump was very easy to replace (3) screws, easy to reach with front panel off. (Less than 5 minut job. The brake assembly and thrust bearing was a little harder to do, but not bad at all. I found it best to flip the unit upside down to do the brake assembly. Replaced #10-24 x 1/2" screws with 2" long ones. Remember to do this (1) at a time, then back all (6) off a little at a time to release tesion on the 200lb spring. Swap out parts and tighten back down with 2" screws and then swap them back out for the 1/2" ones (1) at a time. I tipped the unit back on its side to install the bearing & pully kit. This takes some of the weight off of the main shaft allowing you to insert the spacers and split ring. The replacement parts seem to be of eqal or better quality to the originals. Machine runs quiet and smooth.
Read less
Parts Used:
Drain Pump with Pulley Brake Stator Washer Brake Rotor Transmission Pulley and Bearing Kit
  • MICHAEL from PLYMOUTH, MN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set
116 of 135 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top