Models > 3809A68

3809A68 ((1986)) MTD Lawn Mower - Overview

Sections of the 3809A68

[Viewing 1 of 1]
Parts Diagram and Parts List for (1986) MTD Lawn Mower
Parts
Keep searches simple, eg. "belt" or "pump".
Washer-Lock 5/16 – Part Number: 936-0119
Washer-Lock 5/16
PartSelect #: PS9311087
Manufacturer #: 936-0119
This Washer-Lock 5/16 is a silver, metal part that is sold individually and comes direct from the manufacturer. With a 5/16 Inch Interior Diameter and 1/2 Inch Outside Diameter, it is used to prevent ...
$4.95
  In Stock
Lower Handle – Part Number: 749-0928A-0637
Lower Handle
PartSelect #: PS9303048
Manufacturer #: 749-0928A-0637
$34.18
  On Order
Throttle Control Wire 55" – Part Number: 946-0671A
Throttle Control Wire 55"
PartSelect #: PS9311802
Manufacturer #: 946-0671A
This Throttle Control Wire is a 55-inch black Throttle Cable, made of metal with a rubberized casing. It's rated as "Easy" to install, attaching from the throttle control to the carburetor, and requir...
$15.08
  In Stock
TT Sems Screw 3/8-16 X 1.0" – Part Number: 710-0654A
TT Sems Screw 3/8-16 X 1.0"
PartSelect #: PS9100242
Manufacturer #: 710-0654A
$4.32
  In Stock
Keys (Pair) – Part Number: 925-0201
Keys (Pair)
PartSelect #: PS9171554
Manufacturer #: 925-0201
This pair of keys is supplied by the equipment manufacturer for use in lawn and outdoor power equipment. The key is made of metal and designed to prevent unauthorized use or accidental starting of the...
$10.03
  In Stock
Discharge Chute – Part Number: 931-1034B
Discharge Chute
PartSelect #: PS9310891
Manufacturer #: 931-1034B
$73.53
  In Stock
Hex Bolt 5/16-24 X 1.00" Lg. – Part Number: 710-0888
Hex Bolt 5/16-24 X 1.00" Lg.
PartSelect #: PS9088315
Manufacturer #: 710-0888
$4.44
  In Stock
Shoulder Screw, .498 x 1.445 – Part Number: 938-0102
Shoulder Screw, .498 x 1.445
PartSelect #: PS9165077
Manufacturer #: 938-0102
$7.83
  Special Order
Pivot Bar – Part Number: 15262B
Pivot Bar
PartSelect #: PS8870533
Manufacturer #: 15262B
$15.65
  In Stock
Height Adjustment Plate – Part Number: 787-01290A
Height Adjustment Plate
PartSelect #: PS9135301
Manufacturer #: 787-01290A
$12.19
  In Stock
Wire Tie – Part Number: 725-0157
Wire Tie
PartSelect #: PS9100863
Manufacturer #: 725-0157
$3.99
  In Stock
Push Nut 1/4" – Part Number: 926-0106
Push Nut 1/4"
PartSelect #: PS9171993
Manufacturer #: 926-0106
$4.11
  Special Order
View More
Back to Top

Questions And Answers for 3809A68

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Rear flap had deteriorated.
Grip each retaining clip next to the housing with large pliers. Squeeze clip completely and pull straight out. Important: Do not attempt to bend clip up or down as clip may bend and become very difficult to remove. When old flap is removed, mower edge can be cleaned and painted to avoid rust. Install new flap in same direction front/rear as removed flap. Reinstall clips in same direction as they were, as up and down sides are not the same.
Read less
Parts Used:
Rear Flap (22&#34)
  • David from PITTSBURGH, PA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top