Models > 11084S

11084S (1985) MTD Lawn Mower - Overview

Sections of the 11084S

[Viewing 1 of 1]
Page A Diagram and Parts List for 1985 MTD Lawn Mower
Page A
Keep searches simple, eg. "belt" or "pump".
Lever & Knob Assembly – Part Number: 94832
Lever & Knob Assembly
★★★★★
★★★★★
(1)
PartSelect #: PS10034156
Manufacturer #: 94832
The Lever and Knob Assembly (or Front Wheel Height Adjuster) is used to adjust the front height of the mower, and attaches on the front wheels. It can be installed using a socket set and wrench set, a...
$10.92
  In Stock
Bell. Wash. .340 I.D. x .872 O.D. – Part Number: 736-0242
Bell. Wash. .340 I.D. x .872 O.D.
PartSelect #: PS10006541
Manufacturer #: 736-0242
Sourced directly from the original manufacturer, this Bell Washer is made of gold-colored metal and is sold individually, not as part of a kit or assembly. It is used to provide spacing between variou...
$4.32
  In Stock
Star Knob 5/16-18 – Part Number: 720-04072A
Star Knob 5/16-18
PartSelect #: PS9109078
Manufacturer #: 720-04072A
This Star Knob, which may also be simply referred to as a Knob, is sourced directly from the manufacturer for use in lawn mowers and snow blowers. This part provides a quick-release for handles to fol...
$7.00
  In Stock
Hex Wash. Scr. 1/4-14 x .625" Lg. – Part Number: 710-0896
Hex Wash. Scr. 1/4-14 x .625" Lg.
PartSelect #: PS10001824
Manufacturer #: 710-0896
$4.44
  In Stock
Carriage Bolt 5/16-18 x 2" – Part Number: 710-1174
Carriage Bolt 5/16-18 x 2"
PartSelect #: PS10001859
Manufacturer #: 710-1174
$7.23
  In Stock
TT Sems Screw 3/8-16 X 1.0" – Part Number: 710-0654A
TT Sems Screw 3/8-16 X 1.0"
PartSelect #: PS9100242
Manufacturer #: 710-0654A
$4.32
  In Stock
Discharge Chute – Part Number: 931-1034B
Discharge Chute
PartSelect #: PS9310891
Manufacturer #: 931-1034B
$73.53
  In Stock
Bell-Wash. .40" I.D. x .88" O.D. – Part Number: 736-0105
Bell-Wash. .40" I.D. x .88" O.D.
PartSelect #: PS10006502
Manufacturer #: 736-0105
This Bell-Wash Flat Washer is an OEM part that measures .40 inches I.D. x 88 inches O.D. This washer is a silver, metal, washer sold individually. This part is rated as Easy to install by customers....
$4.57
  In Stock
Screw, 3/8-16, 2.00, Gr5 – Part Number: 710-3144
Screw, 3/8-16, 2.00, Gr5
PartSelect #: PS9089292
Manufacturer #: 710-3144
$4.63
  In Stock
Ball Bearing – Part Number: 941-0484
Ball Bearing
PartSelect #: PS9311596
Manufacturer #: 941-0484
$7.91
  In Stock
Int. Cotter Pin 5/16" Dia. – Part Number: 914-0104
Int. Cotter Pin 5/16" Dia.
PartSelect #: PS9164893
Manufacturer #: 914-0104
The Int. Cotter pin 5/16" is an individually sold, silver metal Cotter pin measuring 5/16 x 34. It can be used to secure and lock parts in place, requires pliers to install, and is rated as "Easy" to ...
  No Longer Available
Height Adjustment Knob – Part Number: 720-0426
Height Adjustment Knob
PartSelect #: PS10004071
Manufacturer #: 720-0426
  No Longer Available
View More
Back to Top

Questions And Answers for 11084S

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Rear flap had deteriorated.
Grip each retaining clip next to the housing with large pliers. Squeeze clip completely and pull straight out. Important: Do not attempt to bend clip up or down as clip may bend and become very difficult to remove. When old flap is removed, mower edge can be cleaned and painted to avoid rust. Install new flap in same direction front/rear as removed flap. Reinstall clips in same direction as they were, as up and down sides are not the same.
Read less
Parts Used:
Rear Flap (22&#34)
  • David from PITTSBURGH, PA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top