Maytag Washer Caps and Lids

Videos!

Your Price

$11.09

Maytag Washer Agitator Cap Barrier with Seal

★★★★★

11 Reviews

PartSelect Number PS11748113

Manufacturer Part Number WPW10074580

The O-Ring is included with this cap. It can be purchased separately as Part #WPW10072840.

Fixes these symptoms

Does not dispense fabric softener or detergent
Leaking
Marks left on clothes
See more...

Installation Instructions

Kevin from Everett, WA

upper portion of 2-piece agitator didn't spin

Popped the agitator cap with a flathead screwdriver. Removed the dust cap, tearing the o-ring in the process. Removed the bolt that holds the agitator in place, removed the whole agitator. Pulled the top portion of the agitator off, removed the dog housing and all pieces of the broken dog pieces. Replaced them, and put it all back together in reverse order. Pretty straight forward repair. Works great! Read more...

Your Price

$367.10

Maytag Washer Lid

★★★★★

13 Reviews

PartSelect Number PS12584356

Manufacturer Part Number W11259006

This lid is for washers. The lid covers the washer tub opening. Wear work gloves to protect your hands when installing this part.

Fixes these symptoms

Lid or door won’t close
See more...

Installation Instructions

Greg from RICHMOND, VA

Broken lid frame at left hinge.

Raised lid to remove two Torx head screws from each hinge. Lid will then lift off of hinges. Installation of new lid was the reverse of the removal procedure. It is best to install one hinge to the lid by removing that hinge from the washer. The lid can then be installed by inserting that hinge into it's spot and then over the other hinge. Install the hinge screws into the second hinge and the job is complete. The lid now closes properly allowing the automatic lid lock to function properly. Read more...

Your Price

$22.56

Maytag Washer Cap

★★★★★

1 Review

PartSelect Number PS11750408

Manufacturer Part Number WPW10208398

This is a dryer door hinge cap, also known as a bushing, which is a durable plastic cap that is installed on the door hinge and is used to allow your dryer door to operate smoothly when opening and closing. If the door for your dryer is not properly opening and closing, this cap needs to be replaced immediately. To replace this door hinge bushing, you will need a screwdriver to remove and disassemble the door for your dryer. This door hinge bushing is sold individually, but normally wears at the same rate as the others within your dryer door, so order as many as are needed.

Fixes these symptoms

Door won’t close
Lid or door won’t close
See more...

Your Price

$11.09

Maytag Washer Agitator Cap

★★★★★

2 Reviews

PartSelect Number PS11741199

Manufacturer Part Number WP3355758

This is the cap for your agitator.

Fixes these symptoms

Will not agitate
See more...

Installation Instructions

Virginia from Philadelphia, PA

The old lint filter was worn, and would "pop up" so that clothes weren't being moved about during the wash and rinse cycles. If I didn't frequently push it down again, it would fly off during a spin cycle. Dangerous!

I simply lifted the lint filter and its cap off, pressed the new agitator cap onto the new lint filter and put the assemblage into place. No tools needed at all. A $50 dollar repair saved me from replacing my washer/dryer! I'm very pleased. Read more...

Your Price

$7.69

Maytag Washer CAP

PartSelect Number PS11775336

Manufacturer Part Number W11050804

Installation Instructions

David from LAKEWOOD, CA

Non agitator pulsating action ceased

Ordered the parts and followed You Tube DYI clip. This 3YOMaytag top loading washer has had a motherboard replaced and now this. It all works fine for now, I cannot imagine what the appliance tech would have charged. Maytag is not what it used to be. Read more...

Your Price

$16.74

Maytag Washer Lid Lock Bezel

★★★★★

1 Review

PartSelect Number PS12578749

Manufacturer Part Number W11237158

The lid lock bezel attaches to the top washer panel and houses the lid lock assembly.

Your Price

$21.31

Maytag Washer Cap

★★★★★

5 Reviews

PartSelect Number PS11753570

Manufacturer Part Number WPW10352675

Installation Instructions

Brian from KENNEWICK, WA

Washer not draining.

I changed the part. Hooked everything back up. It worked excellent. Is quieter than before. Read more...

Your Price

$36.21

Maytag Washer Shield

★★★★★

3 Reviews

PartSelect Number PS11754637

Manufacturer Part Number WPW10427633

Your Price

$37.77

Maytag Washer Hinge Hole Cover

★★★★★

1 Review

PartSelect Number PS11741068

Manufacturer Part Number WP33001764

This hinge hole cover is sold individually and white in color. Two are required per appliance.

Installation Instructions

Dee from Redding, CA

The door wouldn't stay shut after starting machine.

First I remove the the four screws surounding the front door. Then I took off the front panl cover. This give axcess to the nuts that needed to be removed to lift the top panl. Once the top panl was lifted up (not removed) then I was able to unscrew the door latch that was broken and replace it with the new one. I replaced one conected wire at a time so that I wouldn't get them mixed up. After that it was then easy to put back together! It works great now! Saved me from having to go out and buy new ones or to have a repair man come over. Cost me under eighty bucks! I was very happy! Thanks PartsSelect.com! Read more...