Kenmore Washer Caps and Lids

Videos!

Your Price

$11.09

Kenmore Washer Agitator Cap Barrier with Seal

★★★★★

11 Reviews

PartSelect Number PS11748113

Manufacturer Part Number WPW10074580

The O-Ring is included with this cap. It can be purchased separately as Part #WPW10072840.

Fixes these symptoms

Does not dispense fabric softener or detergent
Leaking
Marks left on clothes
See more...

Installation Instructions

Kevin from Everett, WA

upper portion of 2-piece agitator didn't spin

Popped the agitator cap with a flathead screwdriver. Removed the dust cap, tearing the o-ring in the process. Removed the bolt that holds the agitator in place, removed the whole agitator. Pulled the top portion of the agitator off, removed the dog housing and all pieces of the broken dog pieces. Replaced them, and put it all back together in reverse order. Pretty straight forward repair. Works great! Read more...

Your Price

$29.99

Kenmore Washer Pulsator Cap

★★★★★

11 Reviews

PartSelect Number PS3525704

Manufacturer Part Number 5006EA3009B

This part is known as a pulsator cap or washplate cap, and is designed for your LG washer. It fits over the washplate mounting bolt and prevents clothes from getting caught on the washplate during a wash cycle. It is round in shape, and approximately 3 inches in diameter.

Fixes these symptoms

Will not agitate
See more...

Installation Instructions

Kristen from Safford, AZ

Washer pulsator was coming loose during wash cycle.

Since the old pulsator had actually come off during a wash cycle, I was able to place the new one on easily. Tightened the screw with a socket. Then placed the new cap on. Before placing the new pulsator on, I was able to clean all the mold and hard deposits off the mechanism under the pulsator. The hard deposits were also scrapped from the pulsator holding (where the screw goes) which may have caused the problem to begin with. Read more...

Your Price

$11.09

Kenmore Washer Agitator Cap

★★★★★

2 Reviews

PartSelect Number PS11741199

Manufacturer Part Number WP3355758

This is the cap for your agitator.

Fixes these symptoms

Will not agitate
See more...

Installation Instructions

Virginia from Philadelphia, PA

The old lint filter was worn, and would "pop up" so that clothes weren't being moved about during the wash and rinse cycles. If I didn't frequently push it down again, it would fly off during a spin cycle. Dangerous!

I simply lifted the lint filter and its cap off, pressed the new agitator cap onto the new lint filter and put the assemblage into place. No tools needed at all. A $50 dollar repair saved me from replacing my washer/dryer! I'm very pleased. Read more...

Your Price

$7.69

Kenmore Washer CAP

PartSelect Number PS11775336

Manufacturer Part Number W11050804

Installation Instructions

David from LAKEWOOD, CA

Non agitator pulsating action ceased

Ordered the parts and followed You Tube DYI clip. This 3YOMaytag top loading washer has had a motherboard replaced and now this. It all works fine for now, I cannot imagine what the appliance tech would have charged. Maytag is not what it used to be. Read more...

Your Price

$16.74

Kenmore Washer Lid Lock Bezel

★★★★★

1 Review

PartSelect Number PS12578749

Manufacturer Part Number W11237158

The lid lock bezel attaches to the top washer panel and houses the lid lock assembly.

Your Price

$11.24

Kenmore Washer Filter Cover

PartSelect Number PS2345090

Manufacturer Part Number 134640300

Installation Instructions

Michael from MOSES LAKE, WA

Washing machine was leaking from the bottom, immediately after starting

After removing the front and door (easy after watching video) the problem was obvious. The old Tub to Pump Hose had come disconnected. The hose clamps came off easily and the replacement was straightforward. A bit of fussing to get the clamps to slide into the right position, but easily accomplished after some persistence. Definitely glad I did not call a repair guy for this. Read more...

Your Price

$201.83

Kenmore Washer COVER,TOP

PartSelect Number PS7794992

Manufacturer Part Number MCK67395501

This is the top cover for various models of LG washing machines. This cover is used to fit on the top of the washer and hold its lid, lid switch, and various wire harnesses. If the top cover of your washer is warped, worn down, or simply damaged and not fitting properly to the body of the washer cabinet, it should be replaced. This top cover is an OEM part and does not come with the glass lid or any securing screws.