General Electric Dishwasher Brackets and Flanges

General Electric Appliance Parts

Popular General Electric Dishwasher Brackets and Flanges

Your Price
$7.50
  In Stock
General Electric Dishwasher Countertop Bracket
★★★★★
★★★★★
5 Reviews
PartSelect Number PS11700868
Manufacturer Part Number WD01X21740
This mounting bracket is manufactured to secure your dishwasher to your countertop. Mounting brackets should be installed so the dishwasher doesn’t tip forward. You can fit the bracket to either the cabinet or countertop. This part is about 3 inches long and is made of metal. This kit does not include the screws, please order screws separately if necessary.
Your Price
$20.62
  In Stock
General Electric Dishwasher Counter Mounting Bracket Kit
★★★★★
★★★★★
4 Reviews
PartSelect Number PS311777
Manufacturer Part Number WX13X10001
This part is used for Corian or Granite counter tops.
Installation Instructions
David from San Antonio, TX
Dishwasher was not mounted to granite counter top
I just moved into a house and the previous owner did not have the dishwasher mounted to the granite counter top. I purchased the mounting kit and installed to the sides of the dishwasher into predrilled holes and into the sides of the cabinets. It was easy and the dishwasher is now secure. Read more...
Your Price
$7.69
  In Stock
General Electric Dishwasher GUIDE RAIL BRACKET Assembly W
PartSelect Number PS3486903
Manufacturer Part Number WD12X10317
Your Price
$84.25
  In Stock
General Electric Dishwasher CONDUIT CARRIER MID
PartSelect Number PS958924
Manufacturer Part Number WD12X10114
Fixes these symptoms
Installation Instructions
Deborah from Escondido, CA
dishes wre not getting clean
I handed the parts to my husband and asked him to do it. Read more...
Your Price
$52.94
  Special Order
General Electric Dishwasher KIT XL-DW TOP MNTG
PartSelect Number PS1155092
Manufacturer Part Number WD35X10056
Your Price
$8.06
  In Stock
General Electric Dishwasher BRACKET DETERGENT DISPLA
★★★★★
★★★★★
1 Review
PartSelect Number PS958793
Manufacturer Part Number WD01X10207
Installation Instructions
Dean from Newark, NY
soap dispenser latch was worn - cover would not stay shut
remove door panel (outer side) remove wires from soap dispenser remove old dispenser install new dispenser re-install wires and door cover total time less than 30 minutes Read more...
Your Price
$20.62
  Special Order
General Electric Dishwasher BRACKET
PartSelect Number PS259196
Manufacturer Part Number WD12X382
Your Price
$12.11
  Special Order
General Electric Dishwasher BRACKET
PartSelect Number PS259670
Manufacturer Part Number WD1X1350
Your Price
$22.22
  Special Order
General Electric Dishwasher BRACKET
PartSelect Number PS259678
Manufacturer Part Number WD1X1361
  No Longer Available
General Electric Dishwasher BRACKET RINSE MODULE
PartSelect Number PS958954
Manufacturer Part Number WD12X10146
Installation Instructions
Bryan from Gilbert, AZ
Replacement of soap dispenser
I replaced the broken/cracked soap and Jet Dry dispenser (i.e. MODULE RINSE AND CAP ASM - part #PS1481889). (Water was leaking into the soap holder and hardening the soap into a lump before the door would open, rendering the soad useless).

Steps:

1) Unplugged the dishwasher.
2) Unscrewed the 6 screws holding the front stainless steel panel to the plastic door; set aside panel and insulation.
3) Unplugged two wires from small electric motor in broken ASM.
4) Unscrewed 6 screws holding ASM in place; easily slid out of door.
5) Slid in replacement ASM and put 6 screws back in (tightened snugly to make slightly warped door bend to new ASM).
6) Plug back in two wires into new ASM.
7) Re-attached stainless steel cover to door (having a 2nd person hold this in place while screwing would've helped).

All done - works like a charm! No more dirty dishes because the soap didn't work right...

Bottom line: If you have a phillips head screwdriver, you can do this repair. Easy to do.
Read more...

Related General Electric Dishwasher Parts