Cub Cadet Snow Blower Carburetors

Your Price

$6.97

Cub Cadet Snow Blower Kit-Needle/Seat

★★★★★

1 Review

PartSelect Number PS8963322

Manufacturer Part Number 398188

This needle and seat kit, also known as a float valve, is found in many types of liquid-fueled lawn equipment, such as carburetors. The valve regulates the flow of fuel into the float bowl. The needle and seat work together to make sure that the valve opens and closes properly, so that it does not leak or overflow. If it is broken, you may notice a strong odor of fuel coming from your machine. Your engine may also run poorly or not start at all. A damaged or corroded float valve can cause fuel leaks, which can be dangerous as they are flammable. To remove the float valve, first disconnect the spark plug wire on your machine. You then need to consult your user manual to locate the float bowl of your machine and remove the bolts or screws securing their cover in place. When you lift off the cover, you will find the needle attached to the float. Using a pair of needle-nose pliers, grasp onto the needle and pull it out of the float. Keep in mind when you are purchasing this OEM-manufactured kit that it comes with the needle and seat together, but the float itself is not included.

Fixes these symptoms

Will Not Start
See more...

Your Price

$10.55

Cub Cadet Snow Blower Float-Carburetor

PartSelect Number PS8961149

Manufacturer Part Number 398187

Your Price

$114.09

Cub Cadet Snow Blower Carburetor

PartSelect Number PS9306887

Manufacturer Part Number 796122

Your Price

$31.09

Cub Cadet Snow Blower Kit-Carb Overhaul

★★★★★

1 Review

PartSelect Number PS9306689

Manufacturer Part Number 792006

Installation Instructions

Dana from HAMMOND, IN

Mistreated Briggs & Stratton 206 CC Engine on MTD Chipper

Removed tank and drained old gas.
Removed and disassembled carb. Needed new gaskets and seals, and had to clean corn syrup glaze (separated ethanol) from bowl and everywhere else with carb cleaner.
Throttle linkage was de-plating/rusty. Steel wool and WD40 got it moving again.
Cleaned spark plug electrode.
Reassembled, poured Sea Foam in the bottom of the tank and gave it a few pulls.
Let Sea Foam sit for a while, then filled the tank with Premium.
Blew white smoke for a minute then ran like new. Shredded for a while, then changed the oil. Read more...