Cub Cadet Chipper Shredder Carburetors

Your Price

$17.96

Cub Cadet Chipper Shredder Carburetor Overhaul Kit

★★★★★

4 Reviews

PartSelect Number PS8984098

Manufacturer Part Number 498260

This is a replacement carburetor overhaul kit for your small engine. The carburetor is essential to the overall performance of your engine, and the carb can get clogged up over time for a variety of reasons. When your carb becomes clogged, it is often a good idea to take it apart and replace the various parts inside by purchasing a carburetor kit. This is a 15-piece set and contains everything that you will need to do a total overhaul of your carburetor. You may want to purchase some carb cleaner as well, to ensure that the new pieces in the carb kit fit and adhere properly.

Fixes these symptoms

Will Not Start
See more...

Installation Instructions

Jonathan from LIBERTY TWP, OH

Smelled Gas Leaks

Inspected/removed fuel lines and found signs of leak. Removed and inspected carburetor and found that seals and gaskets were toast. Replaced said seals with ones from the kit that fit and replaced fuel lines.

Would be nice to have a fuel line kit with the big fuel line (tank to carb) and the little one (carb to engine) together with all the necessary clamps. Read more...

Your Price

$4.99

Cub Cadet Chipper Shredder Primer-Carburetor (7/8"Dia. Fits BS Quantum Engines 5, 5.5 &6 HP

★★★★★

2 Reviews

PartSelect Number PS9067198

Manufacturer Part Number 694395

Fixes these symptoms

Will Not Start
See more...

Your Price

$6.97

Cub Cadet Chipper Shredder Kit-Needle/Seat

★★★★★

1 Review

PartSelect Number PS8963322

Manufacturer Part Number 398188

This needle and seat kit, also known as a float valve, is found in many types of liquid-fueled lawn equipment, such as carburetors. The valve regulates the flow of fuel into the float bowl. The needle and seat work together to make sure that the valve opens and closes properly, so that it does not leak or overflow. If it is broken, you may notice a strong odor of fuel coming from your machine. Your engine may also run poorly or not start at all. A damaged or corroded float valve can cause fuel leaks, which can be dangerous as they are flammable. To remove the float valve, first disconnect the spark plug wire on your machine. You then need to consult your user manual to locate the float bowl of your machine and remove the bolts or screws securing their cover in place. When you lift off the cover, you will find the needle attached to the float. Using a pair of needle-nose pliers, grasp onto the needle and pull it out of the float. Keep in mind when you are purchasing this OEM-manufactured kit that it comes with the needle and seat together, but the float itself is not included.

Fixes these symptoms

Will Not Start
See more...

Your Price

$7.13

Cub Cadet Chipper Shredder Bowl-Float

★★★★★

1 Review

PartSelect Number PS9306908

Manufacturer Part Number 796611

Your Price

$10.55

Cub Cadet Chipper Shredder Float-Carburetor

PartSelect Number PS8961149

Manufacturer Part Number 398187

Your Price

$93.29

Cub Cadet Chipper Shredder Equipment Engine Carburetor

PartSelect Number PS9983379

Manufacturer Part Number 591299

This carburetor is for lawn and garden equipment engines. Carburetor mixes air and gas before the fuel mix goes to the engine. Wear work gloves to protect your hands and work in a well-ventilated area during this repair.

Your Price

$23.43

Cub Cadet Chipper Shredder Thermostat

PartSelect Number PS9983970

Manufacturer Part Number 593208

Your Price

$31.09

Cub Cadet Chipper Shredder Kit-Carb Overhaul

★★★★★

1 Review

PartSelect Number PS9306689

Manufacturer Part Number 792006

Installation Instructions

Dana from HAMMOND, IN

Mistreated Briggs & Stratton 206 CC Engine on MTD Chipper

Removed tank and drained old gas.
Removed and disassembled carb. Needed new gaskets and seals, and had to clean corn syrup glaze (separated ethanol) from bowl and everywhere else with carb cleaner.
Throttle linkage was de-plating/rusty. Steel wool and WD40 got it moving again.
Cleaned spark plug electrode.
Reassembled, poured Sea Foam in the bottom of the tank and gave it a few pulls.
Let Sea Foam sit for a while, then filled the tank with Premium.
Blew white smoke for a minute then ran like new. Shredded for a while, then changed the oil. Read more...