This drive hub kit (part number W10528947VP) is for washers.
Drive hub kit W10528947VP connects the spin basket to the spin shaft that spins the basket. The kit may include multiple parts; refer to...
This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the spl...
This is lid lock designed for use within various washing machines. This lid lock, also known as a latch assembly, is used to secure the lid of your washing machine during the washing cycle. If your wa...
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
This suspension rod kit is a genuine OEM replacement kit that is compatible with various models of washing machine. The kit is responsible for supporting the inner tub of the washing machine and absor...
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installat...
This is a lid strike for various models of top-load washing machines. Lid strikes are designed to engage with the lid switch and communicate to the control board that the washer can start. If your was...
$20.63
In Stock
Questions And Answers for MVWC565FW0
Ask our experts a question about this model and we'll get back to you as soon as possible!
48 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bernice
February 13, 2020
Lid locked light keeps blinking and does not allow me to start washing machine
For model number MVWC565FW0
Hi Bernice, thank you for your question. You can try to reset your appliance by unplugging it for about 30 minutes. If you plug it back in and still get the error, you may have to replace your lid lock as being the issue. Good luck with your repair.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Robert
November 26, 2019
Washer agitator goes through cycle when spin cycle should turn on it just sits no movement machine stops cycling.
For model number MVWC565FW0
Hello Robert, Thank you for the question. This sounds like an issue with the cycle timer not processing through the cycles properly. The timer is built into the control board PartSelect Number PS12114300, so the board will need to be replaced. Hope this helps!
Hello Chris and thank you for writing.
It certainly sounds like it could be a faulty or loose drive belt PS11747978, you should check for signs of damage, and replace if necessary. We hope this helps. Please contact us anytime.
after washing a load i see small pieces of black resedue left at bottom of drum
For model number MVWC565FW0
Hi Alfonso, thank you for contacting us. Based on the description that you have provided, we would recommend running an empty cycle. It will wash away all the dirt and lint. If this does not solve the problem, we would recommend replacing the lint filter, part number PS11750500, to fix the issue. It traps lint and debris from the drain water. We hope that helps!
My basket doesn't spin anymore. What part do I need?
For model number MVWC565FW0
Hi Albert, thank you for getting in touch. We would suggest checking the drive belt first. If it is fine, you may need to replace the drive clutch kit, part number PS10057144. It attaches to the drive belt and rotates the spin basket drive shaft. We hope this solves your problem!
Well, first investigated and found loose nut on drive clutch. First take off the two screws with nut drive then cover off using a screwdriver blade to snap off the cover. Then socket ratchet to take off the nut on drive clutch. take off belt by slowly rotating the drive gear. two screws that hold the electronics to the upper drive clutch
... Read moreand put aside, so you can snap off the cover for drive clutch on upper part with screwdriver and off the parts come and install whole unit back as took it apart. Line up the new upper clutch so that is position as was before. (Using parts diagram helps a lot as www. partsselect.com has for you or Maytag.com.) Then put the electronic part board back on and the gear and nut. Make sure it is tight by several attempts to make sure it's snugged up good and then slowly roll belt back on the pulley and motor drive. Put your cover guard back on with two screws and done.
ordered hub and it shipped quickly. I was able to put the hub in place and screw the screws in. you want to tighten them down slowly and go around to each screw tightening a little at a time so you don't break the hub. as you tighten the screws down the hub slides down flush. its impossible to just push the hub on with your hand. Buttoned
... Read more it back up and got caught up on laundry. good day when the washer is fixed.
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.