This thermostat (Dryer Operating Thermostat, Dryer Cycling Thermostat, Cycling Thermostat, Dryer Thermostat) is used to maintain a temperature of 155 degrees in the dryer drum. The internal bias heate...
This dryer door switch is a simple on/off switch mechanism that prohibits the dryer from operating when the door is open, and operates the drum light. White in color and 6.5 inches long, this OEM swit...
The thermal cut-off (Dryer Thermal Cut-Off Fuse Kit, Dryer Thermal Cut-Off Kit) prevents the dryer from overheating when the dryer high limit thermostat fails in a closed circuit condition. This part ...
The drum support roller kit (Dryer Repair Kit) allows the dryer to tumble properly by supporting the drum cylinder. The idler pulley provides the tension required for a multi-ribbed belt. The belt att...
The drum support roller kit allows the dryer to tumble properly by supporting the drum cylinder. The kit includes two drum rollers, four tri-rings, and one palnut (or retaining washer). The kit does n...
A dryer high-limit thermostat (High Limit Thermostat, Hi-Limit Thermostat, Dryer High-Limit Thermostat) is a switch that is actuated by temperature change. This high limit thermostat acts as a safety ...
If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pul...
If your washer shakes or vibrates loudly when it reaches its max speed, check that the leveling legs are even. To ensure that the washer is firmly on the ground using all four legs, adjust the legs so...
This manufacturer-certified dryer lint filter is used to collect lint during the dryer cycle, to prevent damage to the machine and to prevent lint from sticking to clothes. This model comes in white a...
This ten watt appliance light bulb is two inches tall. It is used with both washers and dryers.
$16.32
In Stock
Questions And Answers for MEDC400VW0
Ask our experts a question about this model and we'll get back to you as soon as possible!
10 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Robert
February 1, 2020
Our dryer is not heating as it should. How do i check for the defective part.
For model number MEDC400VW0
Hello and thank you for writing.
It certainly sounds like it could be a faulty thermal cut off PS334299 you should check the part(s) for signs of damage or test with a multimeter, and replace the part(s) as needed. We hope this helps. Please contact us anytime if you require further assistance. For your convenience, we have attached the link to our repair video. We hope this helps. Good luck with your repair.
https://www.youtube.com/watch?v=ioyEkXiyXYQ&feature=emb_title
Dryer quit mid-cycle. Drum turns freely, checked breaker (ok) will not start at any heat/time setting. No indication of excessive heat, no electrical or other unusual smells, no noise heard when unit quit.
For model number MEDC400VW0
Hello Richard, thank you for contacting us. To be sure, please test the thermal cut-off kit, part number PS334299, with a multimeter for continuity. Also, check the door switch, part number PS11741701, and the dryer timer, part number PS11745797. These are the most probable culprits. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
My dryer continues to heat after the drum stops....my knob also does not shut off at the cycle desired when completed. what could be the issue here? thanks
For model number MEDC400VW0
Hi Sherri,
Thank you for your question. If your dryer will not shut off, there are some parts that you will need to check to see which one is causing the issue. You will need to check the door switch, the cycling thermostat, the thermal cut-off and the high limit thermostat. We hope this helps! Good luck with the repair!
The dryer will heat up immediately and it smells like something is burning, but the drum will not spin.
For model number MEDC400VW0
Hi Sara,
Thank you for your question. If your dryer is not spinning and there is a burning smell, there are some parts that you will need to check to see which one is causing the issue. You will need to check the belt, the motor and motor pulley, the door switch, the seals, the split ring bearing and the cycling thermostat. We hope this helps! Good luck with the repair!
Smell of oil or cleaning fluid and takes longer to dry
For model number MEDC400VW0
Hi Susan,
Thank you for your question. If it is taking a long time for your dryer to dry clothes and you are getting a chemical or oil smell when it is in use, you may have a blockage in the vent duct. Check the lint filter and the vent duct to make sure that that they are free of lint. If they are clogged, you will need to clean them as they restrict air flow. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
First tried heating element and thermal fuse with no luck. Ordered thermal cutoff and fixed problem. Had I used an ohm meter first I would have determined problem before having ordered heating element and fuse, as both had resistance. I wast just lazy and ordered the took the most common failed components first before taking dryer back
... Read more off.
I ordered all the thermal sensors for the dryer. They arrived two days later and they were the correct parts. It took me about 1/2 hour to replace all three sensors and now the dryer works like new again. My wife was very pleased, so was I.