Crosley Dishwasher Wheels and Rollers

Videos!

Your Price

$11.10

Crosley Dishwasher Rack Adjuster

★★★★★

32 Reviews

PartSelect Number PS11750255

Manufacturer Part Number WPW10204131

This OEM dishrack roller and adjuster is found in your dishwasher. They work together to support and facilitate the smooth movement of your dishrack. The dishrack rollers are small wheels located on the sides of the dishrack and allow it to slide in and out effortlessly. Meanwhile, the dishrack adjuster is used to adjust the height via the selector at the back of this component. Over time, the rollers wear out. You may experience resistance or difficulty when sliding the dishrack in or out. If left unreplaced, your rollers or adjuster may break, causing dishes to tilt, collide, or fall over during the wash cycle. When removing a roller and adjuster from your appliance, you will need to pull out the dishrack partway. Detach the assembly by depressing the tabs on the two end stops before lifting them up. Keep in mind that the roller and adjuster are sold together, but the dishrack itself is sold separately.

Installation Instructions

Randy from Glenview, IL

Replacement of broken Rack Assembly Mount with Wheel

The only piece that may be a little difficult to remove here without a tool is the 'Track Stop'. This piece has a couple of clip-like pieces that need to be depressed in order to remove it. A flathead screw driver will do the trick. Once this piece is out and you have popped the Mount off of the Rack, you simply roll the piece out of the track, roll the new one in and snap the new Mount in place, replacing the Track Stop when you are done. VERY EASY! Read more...

Videos!

Your Price

$23.20

Crosley Dishwasher Wheel and Bushing Assembly

★★★★★

2 Reviews

PartSelect Number PS976040

Manufacturer Part Number 154522902

Sold Individually. Order quantity needed.

Your Price

$18.16

Crosley Dishwasher Tub Wheel - NOT a Rack Wheel

★★★★★

2 Reviews

PartSelect Number PS2378567

Manufacturer Part Number 154767502

This is a roller assembly for your dishwasher. This part attaches to the inside of the tub, where it helps guide the track and support the top of the dishrack. Take note that this part is sold individually. This model is gray in color and has a diameter of 1.5 inches, and a height (with screw) of almost 2 inches. You will need to replace this part if you are having trouble moving your dishrack.

Installation Instructions

Sharon from HAMPTON, NH

Two of the tub wheels cracked and broke off.

Unscrewed the old ones, new ones come with screw built in and recrewed the new ones in. So easy. Read more...

Videos!

Your Price

$51.61

Crosley Dishwasher Dishrack Roller Assembly

★★★★★

9 Reviews

PartSelect Number PS11769236

Manufacturer Part Number W10888592

Installation Instructions

Sally from COCHRANVILLE, PA

These 3 parts were broken or missing.

I had to watch a You Tube Video and the Repair was basically snapping these parts on the rack and glide. No tools needed! Read more...

Videos!

Your Price

$12.46

Crosley Dishwasher Lower Wheel Assembly

★★★★★

19 Reviews

PartSelect Number PS11747717

Manufacturer Part Number WP99002780

This lower dishrack roller is less than two inches in diameter. It is made entirely of white plastic. If you find that your dishwasher is making loud noises or the lower rack is getting stuck when you are moving it in or out, it could be that the lower wheel assembly needs to be replaced. The dishrack wheels allow for easy movement of the dishrack in and out of the dishwasher. These rollers tend to wear down at the same speed, so it is recommended to replace both pairs at the same time. Open your dishwasher and remove the bottom rack, locate the locking tab, and rotate until it easily slides out of place. Slide the new wheel over the shaft and locate the locking tab to snap back into place.

Fixes these symptoms

Noisy
Not cleaning dishes properly
See more...

Installation Instructions

Walter from Tucson, AZ

Broken latch handle

The hardest thing was figuring out that you only need to purchase the latch handle because it only comes as a complete latch assembly, why they even list the latch assembly as a separate part in the parts list stupid. (you get the handle and latch already put together and it cost less than the latch assembly without the handle). Anyway all you need to do is disconect the power from the dishwasher (unless you like to live dangerously like me) take your drill with the correct size torx bit and remove all the screws on the inside door pannel (the top center two screws actually hold the latch assembly in place). Disconect the 4 wires from the old part and reconect them to the new part and reinstall all the torx screws being careful not to strip the plastic threads that they screw into if you are using a drill. Whole process takes less than 5 minutes. I am surprised that Maytag used such a flimsy handle assembly in their dishwashers since they are supposed to have the repair men with the most time on their hands. They probably sell just as many handle assemblies as they do dishwashers that have this particular part in it, probably more since you will probably have to change it 2 or 3 times during the life of the unit. Read more...

Videos!

Your Price

$58.66

Crosley Dishwasher Wheel Assembly

★★★★★

11 Reviews

PartSelect Number PS11745449

Manufacturer Part Number WP8268645

Sold Individually - 4 required on rack.

Installation Instructions

Timothy from huntersville, NC

The dishtrack wheel came off the track and fell into the dishwasher and melted

I snapped on the new part onto the track. It was that easy! :) Thank goodness the part was available from Part Select!
T. Edwards Read more...

Videos!

Your Price

$17.19

Crosley Dishwasher White Dishrack Roller

★★★★★

6 Reviews

PartSelect Number PS11746834

Manufacturer Part Number WP903093

This upper dishwasher dishrack roller, also known as a dishrack wheel, allows you to roll the dishwasher rack easily on the support rails. If your dishwasher rack is disconnected or the rack is broken, then replacing this part might be the solution. The first step in this repair is to remove the upper dishrack from the track, the next step is to remove the defective rack roller and replace it with the new one by sliding it onto the shaft and locking it in. No tools are required for this replacement and customers rate this project as easy. The roller is entirely made from plastic and is just over an inch in diameter.

Fixes these symptoms

Not cleaning dishes properly
See more...

Installation Instructions

Kathy from Lombard, IL

Rack roller broke

I opened the end stop of the rack, replaced the roller, and put the end stop back on. I can't believe I paid the repairman the last time $125????? An he put in a regular screw that rusted and broke the roller. Took me 3 minutes! Thanks Read more...

Your Price

$13.95

Crosley Dishwasher Upper Wheel Assembly

★★★★★

1 Review

PartSelect Number PS11747718

Manufacturer Part Number WP99002781

Sold Individually.

Installation Instructions

Christopher from Upton, MA

My dog got into the kitchen by going over the dishwasher (100 lb Lab), and bent the rack tracks and broke one of the track wheels. My family wanted a new dishwasher. Whereas I am cheap.

A simple remove and replace was all it took. Remove the little latches on the end of the tracks, Slide the track out, take the broken wheels off-they snap off. Snap new wheels on rack. Slide new track in threading it through the stationary wheels attached to the wall of the unit, and through the wheels of the rack. Snap the end-caps back on. Good as new. Also replaced a fold away tine that had the plastic worn off it (=rusted). These snap out and new one in very easily. Read more...