Crosley Dishwasher Switches

Videos!

Your Price

$64.00

Crosley Dishwasher Float Switch

★★★★★

2 Reviews

PartSelect Number PS3492842

Manufacturer Part Number 154773201

Water that fills your dishwasher lifts the float. When it reaches a certain level, the float triggers the float switch to shut off, thereby shutting off the flow of water into the dishwasher.

Fixes these symptoms

Leaking
Not draining
Will not fill with water
See more...

Installation Instructions

steve from virginia beach, VA

No water to dish washer

After figuring out the problem wasn't the water inlet switch, I replaced the switch assembly for the water level float. Cut off supply water to dishwasher, removed the 2 screws holding switch assembly, and installed new switch. 15 minutes, very easy job. Read more...

Videos!

Your Price

$30.57

Crosley Dishwasher Door Switch

★★★★★

5 Reviews

PartSelect Number PS11745501

Manufacturer Part Number WP8269209

This dishwasher door switch will shut your dishwasher off when the door is opened.

Fixes these symptoms

Door latch failure
Will Not Start
See more...

Installation Instructions

mike from lockport, NY

dishwasher quit halfway thru a wash cycle

first I noticed that the dishwasher wasn't making any noise. Then I saw that there were no lights on the control panel. I opened the door and found water dripping off everything... I closed the door and tried hitting every button I could see, nothing happened. I checked the breaker, it was ok, and since I did all the wiring myself, I knew that was ok too. So I pulled off the upper panel of the front door and got out the electrical schematic that came with the washer.
first stop, the TCO, the thermal cutoff, it's like an inline fuse. I got 120 volts going in and nothing coming out. Did an ohm check and it was open.
Found it locally and replaced it. Now I've power to the control panel but the washer still doesn't work
because the micro switch in the handle is broken and that turns out to be the original problem...
the stupid plastic handle broke the micro-switch which shorted the TCO... Read more...

Videos!

Your Price

$86.06

Crosley Dishwasher Door Switches and Holder Assembly

★★★★★

17 Reviews

PartSelect Number PS2099645

Manufacturer Part Number 99002254

This part senses when the dishwasher door is closed so the cycle can start, and prevents it from starting if the door is not closed. If the dishwasher will not start or will not close, you may need to replace the door switches and holder assembly, also known as the door latch assembly. The dishwasher will not start if this part is defective. It includes two switches and the holder, this part does not include the handle or screws. Tools needed are T20 torx driver, needle nose pliers, and 1/4 inch nut driver. This is a genuine OEM part that is sourced directly from the manufacturer.

Fixes these symptoms

Door latch failure
Door won’t close
Will Not Start
See more...

Installation Instructions

Robert from Johnson, VT

no power

remove the eight screws that hold the inside door cover to gain access to the door switch.
remove the four wire conections and replace with new new switch Read more...

Videos!

Your Price

$45.77

Crosley Dishwasher Float Switch

★★★★★

2 Reviews

PartSelect Number PS11745484

Manufacturer Part Number WP8268909

Water that fills your dishwasher lifts the float. When it reaches a certain level, the float triggers this float switch to shut off, thereby shutting off the flow of water into the dishwasher.

Fixes these symptoms

Leaking
Not draining
Will not fill with water
See more...

Installation Instructions

Robin from Golden, CO

dishwasher overflowed-assumed the problem was the float switch

replaced the broken parts. Read more...

Your Price

$18.55

Crosley Dishwasher Door Switch

★★★★★

2 Reviews

PartSelect Number PS11747659

Manufacturer Part Number WP99002207

This dishwasher door switch will shut your dishwasher off when the door is opened.

Fixes these symptoms

Door latch failure
Will Not Start
See more...

Installation Instructions

James from Rochester, NY

Door switches were worn. Diswasher would not operate unless extreme pressure was applied to the door.

I pulled the interior of the door until I was able to get to the switches on the door latch. I determined at least one switch was completely worn while the other worked minimally. I then looked for the latch assembly and found out that it was no longer available. So I did some searching and found the exact switches I needed from PartSelect. The switches came in about 3 days which then I installed them. The dishwasher powered right up and stayed on. So in the end it was much cheaper to repair this unit than buy a new one right now. Plus, my wife is happy and so am I. Thanks PartSelect for carrying the parts I needed. Read more...

Your Price

$52.31

Crosley Dishwasher Door Switch

★★★★★

1 Review

PartSelect Number PS11751645

Manufacturer Part Number WPW10274880

Your Price

$55.39

Crosley Dishwasher Float Switch

★★★★★

3 Reviews

PartSelect Number PS11747680

Manufacturer Part Number WP99002560

Water that fills your dishwasher lifts this float. When it reaches a certain level, the float triggers the float switch to shut off, thereby shutting off the flow of water into the dishwasher.

Fixes these symptoms

Leaking
Not draining
Will not fill with water
See more...

Installation Instructions

michael from cambridge, MA

dishwasher tub overfilled between uses and flooded kitchen

Remove lower cover to expose the motor, valves and electrical connections. turn off water supply and electrical circuit breaker. Disconnect leads from float switch. Remove float switch with a single phillips head screw. Replace with new one and attach leads---very easy.

Remove water inlet electrical connections--remember which goes to which connector. Disconnect hot watter supply with open ended box wrench.
Remove water inlet valve from washer wall by unscrewing two sheet metal screws. Use 1/4" socket and 3" extension for this. Use pliers to release the hose clamp holding the rubber water line onto the valve outlet stem. Reverse this sequence to intall the new switch. Moderately easy. Have sponge and paper towels to soak up spills when you do the disconnects.
. Read more...