KitchenAid Dishwasher Latches

Videos!

Your Price

$5.04

KitchenAid Dishwasher Door Catch Kit

★★★★★

125 Reviews

PartSelect Number PS334230

Manufacturer Part Number 279570

This part replaces your appliances latch (Door Latch Kit, Door Catch, Dryer Door Latch Kit). On your appliance you will find both a strike and a catch. The strike is mounted on the body of the dryer, while the catch is mounted on the dryer door. These two parts work together to keep your dryer door closed. The catch holds the door strike to keep the door closed during the drying cycle. If the door does not latch closed, you won’t be able to start a drying cycle. If this part is malfunctioning, you may not be able to open or close your door. In some instances, it may seem like your door is closing, but if it is not latching properly you won’t be able to start your drying cycle. You should replace this part as soon as it’s malfunctioning. Your dryer may run even though the latch is malfunctioning, but it is unsafe if the dryer continues to run while the door is open. This replacement part features 1 door latch kit which includes 2 strikes, 3 catches, and a set of instructions. This model is constructed of plastic and metal, and comes in white/silver.

Fixes these symptoms

Door Pops Open
Door won’t close
Lid or door won’t close
See more...

Installation Instructions

Terri from Saint Augustine, FL

Door Catch part had fallen out,/ was missing

Received your parts, Popped them both right into place, Even though only one side needed to be replaced, I wanted them to match up. It was amazing how easy this was. My husband was quite impressed I had ordered these rather then look for either a new or used dryer from some other source. Read more...

Videos!

Your Price

$36.58

KitchenAid Dishwasher Door Latch - Black

★★★★★

10 Reviews

PartSelect Number PS11756967

Manufacturer Part Number WPW10653840

This is a door latch for various dishwashers. Door latches are designed to communicate with the control board of the dishwasher when the door is closed and latched shut. If your dishwasher is not latching shut properly, or if your dishwasher will not start when the door is shut, then this latch is likely broken or bad. To replace this door latch, you will need a screwdriver or drill, and a set of pliers. This latch is sold individually, and does not come with any securing screws or other parts.

Fixes these symptoms

Door latch failure
Door won’t close
Leaking
See more...

Installation Instructions

RONALD from PRESCOTT, AZ

Door would not latch shut

Following a utube video made it easy. Removed the outer cover of the door to expose latch. Two screws remove the latch, pay attention to how it was positioned and put the new one on and then replace the panel. But first turn off the electricity to the unit at the fuse box. Read more...

Videos!

Your Price

$44.11

KitchenAid Dishwasher Door Latch - Black

★★★★★

21 Reviews

PartSelect Number PS8770043

Manufacturer Part Number W10619006

NOTE: This part has been redesigned, it may appear different but will still function the same as the original.

Fixes these symptoms

Door latch failure
Door won’t close
Leaking
See more...

Installation Instructions

Arthur from NEWNAN, GA

Inoperative door latch replaced by a redesigned latch

1. Disconnect power at the breaker, 2. remove two wood screws fastening the dishwasher to the cabinet and slide the unit out approximately 2 inches. 3. Remove old latch strike and replace with redesigned strike. 4. Slide unit in and reattached to cabinet. 5. Remove 11 screws holding inner panel of door assembly and one screw holding user interface unit to door. 6. Disconnect snap cable to latch assembly and replace the latch unit. 7. Reassemble. Read more...

Videos!

Your Price

$67.08

KitchenAid Dishwasher Door Latch and Switch Assembly

★★★★★

13 Reviews

PartSelect Number PS11754317

Manufacturer Part Number WPW10404412

Handle NOT included. This door latch with the switches is a simple on/off mechanism that prohibits the dishwasher from operating when the door is open.

Fixes these symptoms

Door latch failure
Door won’t close
Will Not Start
See more...

Installation Instructions

Gerald from CASTLE ROCK, CO

Lock latch would not function properly

Removed front instrument cover. Removed latch assembly. Tried to fix it . No luck. Ordered new latch assembly. Came in from partsselect in 3 days. Installed new latch. Replaced cover. Read more...

Videos!

Your Price

$105.46

KitchenAid Dishwasher Door Latch

★★★★★

1 Review

PartSelect Number PS886294

Manufacturer Part Number 8193830

As per the factory, this is an updated latch and you will need to order the strike as well - as per your model number.

Fixes these symptoms

Door latch failure
Door won’t close
Will Not Start
See more...

Installation Instructions

Linda from Laguna Niguel, CA

latch pops open on door during cycle...

Replaced strike plate...but may not have needed it ...He used a screw under the front of the strike plate as a wedge to increase tension...He said this has happened to this model before and an old tech told him about this fix...
It must be a defect in the model that after a while the strike plate needs more tension..sent unopened ,unused parts back Read more...

Videos!

Your Price

$73.22

KitchenAid Dishwasher Door Actuator

★★★★★

1 Review

PartSelect Number PS11746083

Manufacturer Part Number WP8524471

This part is the door actuator for your dishwasher. It is made of black plastic and is approximately 3 inches long and 3 inches wide at its widest point. The door actuator is found in the control panel, and it releases the door latch when you lift the handle. If your current door actuator is cracked or broken, you may not be able to open your dishwasher door, or the door will not close properly. The dishwasher also may not be able to start, and if this is the case, you will need to replace it. This part is sold individually and is an authentic OEM part.

Fixes these symptoms

Door latch failure
Door won’t close
Will Not Start
See more...

Installation Instructions

Nigel from Boca Raton, FL

The door handle broke inside so that it was all loose and was difficult to close.

Recoved the screws which secured the handle assembly (approx 8). Removed the old parts and screwed home the new parts and replaced the assembly. Worked perfectly.

The hardest thing for me was to decipher the model number as they use '1s' and 'Is' and you can't tell them apart.

Also the part diagrams should have each part number listed to make it easier. Took me longer to work out what to order than do the repair. Read more...

Videos!

Your Price

$62.32

KitchenAid Dishwasher Door Latch Bracket Kit - NO Handle

★★★★★

7 Reviews

PartSelect Number PS886319

Manufacturer Part Number 8193882

Handle is not included with this part.

Fixes these symptoms

Door latch failure
Door won’t close
Will Not Start
See more...

Installation Instructions

Nigel from Boca Raton, FL

The door handle broke inside so that it was all loose and was difficult to close.

Recoved the screws which secured the handle assembly (approx 8). Removed the old parts and screwed home the new parts and replaced the assembly. Worked perfectly.

The hardest thing for me was to decipher the model number as they use '1s' and 'Is' and you can't tell them apart.

Also the part diagrams should have each part number listed to make it easier. Took me longer to work out what to order than do the repair. Read more...

Videos!

Your Price

$7.41

KitchenAid Dishwasher Lever

PartSelect Number PS11750029

Manufacturer Part Number WPW10195037

Fixes these symptoms

Leaking
Will not fill with water
See more...

Videos!

Your Price

$49.79

KitchenAid Dishwasher Strike Plate

★★★★★

3 Reviews

PartSelect Number PS11746708

Manufacturer Part Number WP8574157

This part is mounted on the top of the dishwasher.

Fixes these symptoms

Door latch failure
Door won’t close
Will Not Start
See more...

Installation Instructions

Linda from Laguna Niguel, CA

latch pops open on door during cycle...

Replaced strike plate...but may not have needed it ...He used a screw under the front of the strike plate as a wedge to increase tension...He said this has happened to this model before and an old tech told him about this fix...
It must be a defect in the model that after a while the strike plate needs more tension..sent unopened ,unused parts back Read more...