KitchenAid Range Knobs
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular KitchenAid Range Knobs
KitchenAid Range Burner Control Knob - Stainless
PartSelect Number PS11749247
Manufacturer Part Number WPW10160371
This knob accepts a D-shaped shaft. Sold individually.
Fixes these symptoms
- Element will not heat
- Will Not Start
- See more...
Installation Instructions
Gary P. from Moses Lake, WA
Broken knob, plastic part of knob cracked
Odered it myself from parts select, most helpful person there, and the knob was here in a short time.
Read more...
KitchenAid Range KNOB
knob onto spindle. Pushed replacement knob onto spindle - perfect fit. Read more...
PartSelect Number PS11770322
Manufacturer Part Number W11030413
This is a control knob for a variety of ovens. This knob is used to adjust and control the heat for the stovetop burners of your range. If your current stovetop is missing this knob, or if it is damaged and not controlling the heat properly anymore, you should replace it. This knob is made of plastic but features a chrome metal sleeve with marking indicators for the various heat levels of your stovetop. Replacing this OEM knob is simple, and requires you to simply pull off the old one, and push on the new one.
Installation Instructions
Richard from SUN LAKES, AZ
Part (knob) made of cast metal, but plastic sleeve inside had broken.
Used needle nose pliers to remove flat spring steel piece which holdsknob onto spindle. Pushed replacement knob onto spindle - perfect fit. Read more...
KitchenAid Range KNOB
PartSelect Number PS11759661
Manufacturer Part Number W10872674
This genuine OEM control knob is designed for ranges. It is located on the front panel of the range, with markings or symbols indicating different heat levels or functions. When the knob is turned, it regulates the flow of gas to the corresponding burner or oven element. It allows users to select the desired temperature or cooking mode. Over time, the burner may break, crack, or the metal retainer clip that fits inside the control knob may become worn down. Signs of a faulty knob may include difficulty turning or adjusting the settings and a loose or wobbly fit. To install the knob, simply pull out the old knob, and snap the new knob in its place.
KitchenAid Range Burner Knob - Stainless Steel
PartSelect Number PS11749250
Manufacturer Part Number WPW10160375
Sold individually. This knob accepts a D-shaped shaft.
Installation Instructions
stella from GRAVETTE, AR
broken burner knobs
simply lined new knobs with the burner switch and pushed them into place.
Read more...
KitchenAid Range Burner Knob - White/Gray
PartSelect Number PS11749973
Manufacturer Part Number WPW10193253
Sold individually.
KitchenAid Range Control Knob
PartSelect Number PS11740843
Manufacturer Part Number WP3182567
This part is a black plastic knob that is most often used as a burner control knob. This knob allows you to turn the burner on your range or cooktop on, and it allows you to control the temperature of the burner. If your knob is broken, damaged, or lost, this is the replacement part you will need. This knob accepts a d-shaped shaft. To successfully install this part, line the flat edge of the shaft up with the hole in the knob, then simply press the knob onto the shaft and into place. This knob is sold individually.
KitchenAid Range Burner Knob
PartSelect Number PS11747112
Manufacturer Part Number WP9750372FC
Sold individually. This bisque knob accepts a double-flat shaft.
Installation Instructions
Steven from Eau Claire, WI
Broken bunner control and knob.
1. Slide out stove & unplug. 2. Remove stove top light top plate (a snap fit - do with care - a little awkward). 3. Remove bulb. 4. Remove two silver head Phillips screws that were under bulb. 5. Control panel swings face down towards stove top. 6. Pull off switch knob (spring pressure clip holds knob on switch shaft) and remove two silver head Phillips screws to release the old switch. 7. Follow instruction sheet that comes with the infinite switch to transfer wire connections to new switch. 8. Reassemble everything in reverse order. 9. Clean up before pushing stove back in.
Read more...
KitchenAid Range Surface Burner Knob
PartSelect Number PS11747113
Manufacturer Part Number WP9750372FF
This knob allows you to turn the burner on your range or cooktop on, and it allows you to control the temperature of the burner. If your knob is broken, damaged, or lost, this is the replacement part you will need. This knob accepts a d-shaped shaft. To successfully install this part, line the flat edge of the shaft on the switch up with the hole in the knob, then simply press the knob onto the shaft and into place. This part is sold individually, and is made of black plastic. This part is approximately 2 inches in diameter.
Installation Instructions
love from newnan, GA
Damaged knob
Had to remove drawer under range to get id number with flashlight. Ordered the part from a very helpful employee and it arrived in timely fashion . I placed the knob on the rod on the stove top and Voila! Excellent service. Thanks.
Read more...
Related KitchenAid Range Parts
- All KitchenAid Range parts
- KitchenAid Range Brackets and Flanges
- KitchenAid Range Circuit Boards and Touch Pads
- KitchenAid Range Cooktops
- KitchenAid Range Doors
- KitchenAid Range Elements and Burners
- KitchenAid Range Grates
- KitchenAid Range Hardware
- KitchenAid Range Hinges
- KitchenAid Range Igniters
- KitchenAid Range Insulations
- KitchenAid Range Legs and Feet
- KitchenAid Range Lights and Bulbs
- KitchenAid Range Panels
- KitchenAid Range Racks
- KitchenAid Range Seals and Gaskets
- KitchenAid Range Sensors
- KitchenAid Range Switches
- KitchenAid Range Trims
- KitchenAid Range Valves
- KitchenAid Range Wire Plugs and Connectors