Models
>
EIDW5905JS0A
EIDW5905JS0A Electrolux Dishwasher - Overview
Sections of the EIDW5905JS0A
[Viewing 8 of 8]Manuals & Care Guides for EIDW5905JS0A
Click to downloadInstall
Installation Instructions
(1.8MB)
Install
Installation Instructions
(1.79MB)
Manual
Owner's Manuals
(2.55MB)
Manual
Owner's Manuals
(9.78MB)
Wiring
Wiring Diagram
(0.86MB)
Keep searches simple, eg. "belt" or "pump".
Silverware Basket
PartSelect #: PS17219661
Manufacturer #: 5304535382
The silverware basket, used for dishwashers, is in the bottom dishrack. The lower dishrack basket is used to hold eating utensils such as spoons, forks, and knives, and other small tools. If the baske...
$36.52
In Stock
FOLD DOWN FENCE WI CLIPS
PartSelect #: PS17219470
Manufacturer #: 5304534829
Sold individually.
$24.20
In Stock
Tine Bracket
PartSelect #: PS2330942
Manufacturer #: 154428403
This is a bracket, but it may also be known as a dishrack row clip, or simply a tine clip, and it is used in conjunction with your dishwasher. The purpose of this part is to fasten to the rack and the...
$9.03
In Stock
Upper Rack Assembly - T3 PRO
PartSelect #: PS10065024
Manufacturer #: A01986801
Upper Rack Assembly - T3 PRO. This is the complete upper rack and the wash arm.
$135.31
In Stock
Detergent Dispenser
PartSelect #: PS11770680
Manufacturer #: 5304507354
This part releases the detergent and rinse aid into the dishwasher. NOTE: Color may vary but the part will function the same as the original.
$59.67
In Stock
RACK ASSEMBLY LOWER SILVER
PartSelect #: PS17219606
Manufacturer #: 5304535253
This lower dishrack assembly comes with 8 rollers enabling it to roll in and out with ease. The dishrack is approximately 22 inches long x 20 inches wide. The dishrack holds dishes in place during the...
$135.52
In Stock
FENCE
PartSelect #: PS11770496
Manufacturer #: 5304506535
This is an authentic upper rack tine (right side), which works with dishwashers.
$19.28
In Stock
Tine Bracket
PartSelect #: PS11770479
Manufacturer #: 5304506508
This bracket is designed for use in dishwashers, and it is a genuine replacement part. It is used in the upper dishrack to hold tines in place. This part is made out of plastic. Please note it is sold...
$8.08
In Stock
RACK ASSEMBLY UPPER
PartSelect #: PS17219603
Manufacturer #: 5304535250
This is an OEM upper dishrack, which works with dishwashers.
$122.60
In Stock
Door Gasket - Black
PartSelect #: PS3651526
Manufacturer #: 154859401
This gasket is a seal for your dishwasher and prevents leaking from occurring. The gasket can become worn down over time and you might notice some discoloration. This indicates a replacement is necess...
No Longer Available
Questions And Answers for EIDW5905JS0A
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Glynis
July 31, 2021
I need a rinse aid dispenser cap for my Electrolux dishwasher model # noted above. Do you sell these or do you know where i could purchase one of these?
For model number EIDW5905JS0A
Hello Glynis, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS421128. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Mike
March 1, 2023
How do you remove filter assemble from bottom
For model number EIDW5905JS0A
Hi Mike, thank you for reaching out. Please follow the given instructions to remove the filter assembly: First, take out the bottom spray arm and glass trap by pulling up on each one. To remove the fine soil filter, start by taking out the two screws, then lift it up and away. Next, take out the two screws holding the coarse soil filter in place. Now, take out the three screws holding the filter assembly in place; the filter assembly will then slide out. We hope this information helps!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Common Symptoms of the EIDW5905JS0A
[Viewing 9 of 9]Not cleaning dishes properly
Fixed by
these parts
these parts
Show All
Leaking
Fixed by
these parts
these parts
Show All
Will not dispense detergent
Fixed by
these parts
these parts
Show All
Door latch failure
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Will not fill with water
Fixed by
these parts
these parts
Show All
Not draining
Fixed by
these parts
these parts
Show All
Not drying dishes properly
Fixed by
these parts
these parts
Show All
Door won’t close
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Dispenser door broken.
Disconnect from power
Unscrewed 4 phillips screws from top of outer door.
Unscrewed 2 screws each siide of door.
Lower outer door section drops away.
Note wiring sequence on dispenser, then disconnect wires.
Unscrew 6 screws on dispenser and lift dispenser out.
Place new dispenser in place (note orient ... Read more ation), ann fasten in place with screws, remembering to replace wire retainer on left lower screw.
Reconnect wires to dispenser correctly.
Slide lower outer door over tabs and secure with the 4 side screws.
Ensure lower door is up under control panel and secure with the 4 top screws.
Fill dispenser with detergent, reconnect power and test run while enjoying a cup of tea in celebration of a job well done..
Unscrewed 4 phillips screws from top of outer door.
Unscrewed 2 screws each siide of door.
Lower outer door section drops away.
Note wiring sequence on dispenser, then disconnect wires.
Unscrew 6 screws on dispenser and lift dispenser out.
Place new dispenser in place (note orient ... Read more ation), ann fasten in place with screws, remembering to replace wire retainer on left lower screw.
Reconnect wires to dispenser correctly.
Slide lower outer door over tabs and secure with the 4 side screws.
Ensure lower door is up under control panel and secure with the 4 top screws.
Fill dispenser with detergent, reconnect power and test run while enjoying a cup of tea in celebration of a job well done..
Read less
Parts Used:
-
C from Covina, CA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
56 of 67 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
large holes in the bottom of the basket where pieces of plastic kept breaking off
I replaced the basket. No tools necessary. New basket seems sturdier than original. Very satisfied with my purchase.
Parts Used:
-
Lauren from Peabody, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
18 of 21 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Center spray arm broke
I was able to pull out the top basket were the glasses are put then I lined up the back and the center plastic clip an slid on the center spray arm. It took about 2 miniutes
Parts Used:
-
Keith from Coventry, RI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
40 of 89 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!