Enter the code TAKE10OFF at checkout to apply your discount. Discount will be applied at checkout when the code is entered & applies to all parts. Cannot be combined with any other coupon or special offer & cannot be applied to a previously placed order. Not valid toward tax or shipping & handling. Discount has no cash value. Discount expires on May 28 at 11:59pm EST.
You've Got 10% Off Your First Order!Save 10% with code at checkout *click to copy coupon code
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The driver (coupling) on my Kitchenaid Blender disintegrated.
I decided to see if I could dislodge the faulty coupling. I placed a screw driver under the coupling and pushed up. It dislodged. Subsequently I found a youtube video that indicated that was exactly what I should do. I ordered the part from parts select and placed the coupling on my blender. It screws in counterclockwise. It works fine. I am very satisfied.
Very simple I turn off the Refrigerator and disconnect the bad ice maker, removed the part. I connect the replacement parts and voila the ice maker been making ice same that day.
to replace the coupling you take the bottom off the blender and loosen the screws that hold the bracket and fan -then comes the hard part-the shaft screw is bolted through every bit of the guts then into the coupling. It is a lefthand thread. I ended up having to fabricate a piece of metal that slipped into the top of the coupling (in the teeth.) Then I secured the metal piece-it was just a twi inch piece of steel- in the vise, I held the blender and I got a big guy to attack the shaft bolt with a bunch of pressure and a straight screwdriver. It finally popped and I was able to unscrew the old coupling and replace it with the new. Reminds of when guys put on lug nuts and I have to try and get them off. But I saved at least $100.