Kenmore Washer Dryer Combo Switches

Find Your Part

Model number locator Need help finding your model number?
  • Search your model number to find:
  • Genuine OEM parts guaranteed to fit
  • Free manuals and guides
  • Repair instructions and videos
Kenmore Appliance Parts
Shop By Part Type

Popular Kenmore Washer Dryer Combo Switches

Your Price
$18.20
  In Stock
Kenmore Washer Dryer Combo Push-to-Start Switch
★★★★★
★★★★★
26 Reviews
PartSelect Number PS3487190
Manufacturer Part Number WE4M416
This switch is used to activate the dryer.
Fixes these symptoms
  • Touchpad does not respond
  • Will Not Start
  • Won’t Start
  • See more...
Installation Instructions
Gary from LAVALLETTE, NJ
replaced start button and start switch
disconnect power plug unscrew 3 screws in back. lean forward remove button disconnect 2 wires in back of switch. put switch connect 2 wires and button. connect 3 screws in the back. ready to start working Read more...
Videos!
Your Price
$18.38
  In Stock
Kenmore Washer Dryer Combo Push-To-Start Switch
★★★★★
★★★★★
18 Reviews
PartSelect Number PS11742178
Manufacturer Part Number WP3977456
This push-to-start switch activates the dryer when the button is pressed and released. If your switch is not turning on or off, will not start, or the contacts inside the switch are shorted out, it is best to replace this part as a possible solution. Remember to unplug your appliance before beginning the installation process, as safety precaution. For installation instructions and accurate guidance, refer to the diagram provided by the manufacturer.
Fixes these symptoms
Installation Instructions
Dennis from Port Orchard, WA
Broke start switch while moving
Turned off the power.Pulled the dryer out, removed the screws from the control cover panel, unplugged the switch, pressed the release clip the did the opposite to install new switch. Replaced the back panel, put the nob on and it looks as good as new.Turned on the power. Read more...
Videos!
Your Price
$23.69
  In Stock
Kenmore Washer Dryer Combo Lid Switch
★★★★★
★★★★★
16 Reviews
PartSelect Number PS11723153
Manufacturer Part Number W10820036
This 3 prong lid switch is used for washing machines that do not have a tub light.
Fixes these symptoms
  • Will not agitate
  • Will not drain
  • Will Not Start
  • See more...
Installation Instructions
Peter from Westbury, NY
washer would not start
To see if the lid switch was the problem I first jumped it out and tried to start the washer. That was the problem. I removed the main controll so I could get to the lid switch. I made the mistake of removing the screws all the way out and the metal clip fell into the body of the washer, no problem since I was changing the drive beld anyway. I realized that you do not remove the screws all the way out, you just have to loosen them and then slide out the lid switch & then replace it. Read more...
Videos!
Your Price
$27.45
  In Stock
Kenmore Washer Dryer Combo Interlock Switch
★★★★★
★★★★★
18 Reviews
PartSelect Number PS1481922
Manufacturer Part Number WD21X10261
The interlock switch may also be referred to as a belt switch. This part is a simple on/off mechanism that prohibits the appliance from operating when the door is open. This is a part for your dryer. The interlock switch senses the door is shut and the dryer can begin. This part might need to be replaced if your dryer is not starting or is in process while the door is open. The black rectangular part of the switch is approximately 2 inches long and a 1/2-inch wide with two gold plates on either end. This is a genuine OEM part that is sourced right from the manufacturer.
Fixes these symptoms
  • Door latch failure
  • Will Not Start
  • Won’t Start
  • See more...
Installation Instructions
Steven from EPHRATA, WA
interlock switch was bad. Prevents the dishwasher form running as it "thinks" the door is still open.
Opened door, removed screw holding down metal plate that presses against interlock switch when door is closed. Removed plastic cover thingy that is over interlock switches. Removed the interlock switch by pressing the plastic lock thingy away from switch. Pulled the wires off each end of the interlock switch. Removed new interlock switch from plastic bag and reversed above procedure. Done, shut door and the dishwasher works. Read more...
Videos!
Your Price
$32.49
  In Stock
Kenmore Washer Dryer Combo Door Switch
★★★★★
★★★★★
6 Reviews
PartSelect Number PS2344321
Manufacturer Part Number WE4M415
A door switch is a simple on/off mechanism that prohibits the dryer from operating when the door is open.
Fixes these symptoms
Installation Instructions
Joshua from Dallas, TX
Dryer would not start
The end repair was very simple and took minimal effort. The time and difficulty was all in the testing. I disassembled the dryer and removed the drum and then hard wired each thermo-fuse to determine where the fault was. After test all of those I was stumped. When I opened the door the light would not come on so I assumed it was a power fault closer to the source. However after all of my testing I couldn't find anything wrong. I then removed the light bulb and realized it was burned out which led me to the door switch being the fault. I removed the switch and soldered the three wire together and the dryer started right up! All I had to do was order a new $15 part, unsolder the wires and plug them in. Would have been so much simpler if that light bulb hadn't of been burned out causing me to over think my diagnosis. This was my first major appliance repair and I did it with only the help of the parts diagram provided on the website. Read more...
Your Price
$82.53
  In Stock
Kenmore Washer Dryer Combo Water Level Switch
PartSelect Number PS1146954
Manufacturer Part Number 134422700
Installation Instructions
Aaron from Williamson, WV
Leaking washing machine; water would not shut off on fill up and rinse
Replacing the switch is relatively easy, however, I would caution all experiencing similar problems one thing. Before assuming, as I did, that the switch was bad, first remove the panel of the washer that houses the washing tub/basin. On the back of the tub, check to make sure that the tube connecting the tub and switch has not come off from the tub as it did in my situation. The solution to my problem of a leaking washing machine where the water would not stop filling on both wash and rinse cycles was simply reattaching the tube to the tub. If I would have checked that first, total job completion time would have been under 15 minutes. Hope this helps. If you need to replace the actual switch, remove the knobs, screws, and panel. Remove the wires, tube, and screw from the switch and reassemble new switch. That took me about 30-45 minutes. Read more...
Your Price
$61.71
  In Stock
Kenmore Washer Dryer Combo Start Switch
★★★★★
★★★★★
4 Reviews
PartSelect Number PS1146154
Manufacturer Part Number 134399700
This start switch is a manufacturer-approved replacement part for your dryer. A faulty start switch means your dryer will not begin its drying cycle. In order to complete this repair, you will need a Phillips screwdriver. Once you access the switch, disconnect the two wire leads and attach them to the new switch. Make sure to disconnect power to the unit before beginning this repair, and wear work gloves.
Fixes these symptoms
Installation Instructions
Greg from Lampasas, TX
Knob craked and broke off the start switch
Removed all the knobs but the master washing machine control knob, then the control and cover panels by removing the two screws that held each one. Then removed the end plastic pieces to allow access to screws holding the switch onto control panel. Used pliers to pull wires off the old switch and put them back on new switch. Screwed it back in place and re-attached plastic end pieces. Re-attached the control panel, then the cover panel under the control panel. Read more...
Videos!
Your Price
$42.05
  In Stock
Kenmore Washer Dryer Combo Push-To-Start Switch - 2 Terminal
★★★★★
★★★★★
11 Reviews
PartSelect Number PS11741476
Manufacturer Part Number WP3395382
This part is used to start the dryer once you have selected a setting on the timer.
Installation Instructions
Donald from Kanona, NY
Dryer would run without pushing the Start Button
Turn off the circuit breaker ( Or remove the Fuse/s )to the dryer,

Removed 2 screws that hold the control cluster to the dryer top. Then I slid the control cluster forward and up to release it from the dryer. then I removed the start button knob to the start switch by pulling on it straight out. Next I removed the six 1/4" hex head screws from back of the removed control cluster. Then using a flat bladed screwdriver I pried up the tab coming off the switch housing. just enought to allow the switch to be turned a quarter of a turn counter clockwise which allows the switch to be removed from the back of the control cluster. Next with a pair of long nose pliers gently pull straight up on the 2 wire terminals attaching wires to the switch. Make a diagram before removing them so that they can be put on the new switch in the same way. Then orient the new switch with its tab located a quarter turn counter clockwise from the hole you pried the old switch tab from. push down on the switch while turning it clockwise 1/4 turn so the tab on the switch drops into it's locking hole. Then using your diagram put the wire terminals back on the switch terminals in the same order and position they came off. Replace the Control panel with the screws you removed. Next position the control panel feet over the holes for them in the top of the dryer and push back a little on the panel to lock it in the correct position. Then take the two longer screws and put one on each side of the panel at the correct angle (not straight up and down) but tilted forward to match the holes and carefully tighten the screws. Next carefully replace the push to start knob on the new switch. Turn the Circuit Breaker (or reinstall the Fuse/s) for the Dryer back on. Then test and make sure that when you select the cycle and the door is closed that pushing the start switch causes the dryer to start. You have done it! Read more...
Your Price
$15.60
  In Stock
Kenmore Washer Dryer Combo Door Switch - 3 Wire
★★★★★
★★★★★
5 Reviews
PartSelect Number PS2330880
Manufacturer Part Number 134813601
This switch is for a dryer door with a drum light.
Installation Instructions
THOMAS from CROSS LANES, WV
drum light stayed on and the dryer would not run, "dr" was was displayed in read out
spoke with repair person he indicated problem was not door switch but control board, prior to repair person arriving I receive the switch in the mail, I unplugged drier used a small edged screw driver to remove door light switch, removed three wire clips from the old switch, re connected the wires to new switch pushed the new switch into its location, closed the door light went out and the drier started and has ran just fine ever since, saved myself several hundred dollars or a new drier Read more...
Your Price
$51.49
  In Stock
Kenmore Washer Dryer Combo Lid Switch Kit
★★★★★
★★★★★
10 Reviews
PartSelect Number PS11741198
Manufacturer Part Number WP3355458
The point of the lid switch is for the tub to stop spinning when the washer lid is opened.
Fixes these symptoms
  • Will not agitate
  • Will not drain
  • Will Not Start
  • See more...
Installation Instructions
Pam from San Diego, CA
Washer stopped before rinse cycle
My husband actually did the repairs all I know is he removed the lid, removed the old switch and put in the new one. My washer works now and thats all I care about. I thank you for having the part and at a reasonable cost we were able to repair our washer considering it is twin stackable and is over 10 years old.
Thanks again!!!! Read more...

Related Kenmore Washer Dryer Combo Parts

Back to Top