Hotpoint Dishwasher Switches

Videos!

Your Price

$44.64

Hotpoint Dishwasher Drain Solenoid and Bracket Assembly

★★★★★

11 Reviews

PartSelect Number PS1481923

Manufacturer Part Number WD21X10268

This valve opens in order for the water to drain out of the dishwasher.

Fixes these symptoms

Leaking
Noisy
Not draining
See more...

Installation Instructions

Hector from West Melbourne, FL

Dishwasher water will not drain.

Very easy about 5 min replacement, Checked electrical conductivity to verify I had a bad solinoid, after I received the new part. I removed and replaced part by only removing and re-installed 2 screws and spring. Dishwasher worked like new. Read more...

Videos!

Your Price

$27.45

Hotpoint Dishwasher Interlock Switch

★★★★★

18 Reviews

PartSelect Number PS1481922

Manufacturer Part Number WD21X10261

The interlock switch may also be referred to as a belt switch. This part is a simple on/off mechanism that prohibits the appliance from operating when the door is open. This is a part for your dryer. The interlock switch senses the door is shut and the dryer can begin. This part might need to be replaced if your dryer is not starting or is in process while the door is open. The black rectangular part of the switch is approximately 2 inches long and a 1/2-inch wide with two gold plates on either end. This is a genuine OEM part that is sourced right from the manufacturer.

Fixes these symptoms

Door latch failure
Will Not Start
Won’t Start
See more...

Installation Instructions

Steven from EPHRATA, WA

interlock switch was bad. Prevents the dishwasher form running as it "thinks" the door is still open.

Opened door, removed screw holding down metal plate that presses against interlock switch when door is closed. Removed plastic cover thingy that is over interlock switches. Removed the interlock switch by pressing the plastic lock thingy away from switch. Pulled the wires off each end of the interlock switch. Removed new interlock switch from plastic bag and reversed above procedure. Done, shut door and the dishwasher works. Read more...

Videos!

Your Price

$20.84

Hotpoint Dishwasher Switch Interlock

★★★★★

8 Reviews

PartSelect Number PS1021382

Manufacturer Part Number WD21X10224

This switch interlock is found on your dishwasher door, and it must be actuated for the dishwasher to start. If your dishwasher door does not close properly, or if the machine will not start, you may have a problem with your switch interlock. This part is sold individually and is an OEM part, built specifically by the manufacturer.

Fixes these symptoms

Door latch failure
Will Not Start
See more...

Installation Instructions

MICHAEL from ORLEANS, IN

would not start

First I removed the 6 screws that hold the inside cover on the door.Then I remover the plastic cover over the switches,pulled out the switches and disconnected the 2 wires from each switch and connected connected them to the new switches exactly as they were on the old switches.Then reinstalled the switches in their holders.I then removed the plunger and spring from between the switches and installed the new spring and plunger exactly like the old one was installed.I reinstalled the door cover making sure everything was in it's place,I put the screws in the door cover and I was done.It was a very simple job. Mike Read more...

Videos!

Your Price

$7.49

Hotpoint Dishwasher Float Switch

PartSelect Number PS260235

Manufacturer Part Number WD21X479

Water that fills your dishwasher lifts this float, and when it reaches a certain level, it acts as a trigger for the float switch. The float triggers the float switch to shut off, thereby shutting off the flow of water into the dishwasher.

Fixes these symptoms

Leaking
Will not fill with water
See more...

Your Price

$92.27

Hotpoint Dishwasher Flood Switch

★★★★★

1 Review

PartSelect Number PS958959

Manufacturer Part Number WD12X10151

Fixes these symptoms

Leaking
Not draining
Will not fill with water
See more...

Your Price

$87.65

Hotpoint Dishwasher Selector Switch Assembly

PartSelect Number PS263138

Manufacturer Part Number WD35X10014

Installation Instructions

Richard from Blackfoot, ID

Dishwasher would not fill with water and switches on front panel would not work properly.

A short investigation revieled that one of the wires going to the malfunctioning switch was burnt and the connector had come loose from the switch assembly. The old assemble was replaced in a short period of time and all is well. Read more...