Amana Washer Knobs
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Amana Washer Knobs
Your Price
$11.10
In Stock
Amana Washer D-Shaped Knob Insert
Don NOT ram it on the selector stem. When it's seated, don't push any more. That's all there is to it. It works. If the pointer on the knob indicates the selector is lined up correctly, but it isn't, the problem is the selector, not the knob. Read more...
PartSelect Number PS11746209
Manufacturer Part Number WP8536939
This insert is sold individually. Knob not included. Knob is sold separately.
Installation Instructions
Larry from HICKORY, NC
The main knob insert snapped.
Nothing to it. Just remember to put the insert in the knob, NOT on the selector stem. Line up the flat part of the insert with the flat part of the stem and push the knob in place. Don NOT ram it on the selector stem. When it's seated, don't push any more. That's all there is to it. It works. If the pointer on the knob indicates the selector is lined up correctly, but it isn't, the problem is the selector, not the knob. Read more...
Your Price
$11.10
In Stock
Amana Washer Control Knob
PartSelect Number PS11757250
Manufacturer Part Number WPW10711289
This control knob is for dryers.
Control knob lets you control cycle settings.
Remove the knob by pulling it straight off its post.
Installation Instructions
JEFFREY from MODESTO, CA
The broke of the knob and had to replace the whole mother board and the knob
I had to remove the whole top of the washer and unplugged all the wire to the board. Getting the board out was the hardest thing to do because no screws it was clamped in place. Once I figured how to unclamped the thing without breaking it, it was relatively simple and to only 15 min to button it back up.
Read more...
Your Price
$31.80
In Stock
Amana Washer Timer Knob - light gray and white
PartSelect Number PS11739486
Manufacturer Part Number WP22003993
This is the second part of a three-part knob. The cap and the skirt are sold separately. This knob is blue and white in colour.
Installation Instructions
huong from bentonville, AR
been pull with plier to get it to run.
replaced timer and pull knob. easy and work great.
Read more...
Amana Washer White Selector Knob
Super easy. Just pushed the knobs on the machines. I made sure that I watched the helpful videos on PartSelect before I did anything though, so I didn't make any mistakes.
PartSelect.com is wonderful. Received the knobs within a day or so.
I'm a very happy customer.
Thanks Read more...
PartSelect Number PS11738808
Manufacturer Part Number WP21001239
This selector knob is white and just over an inch in diameter. Made entirely of plastic, it has a gray indicator dot and is intended for use with both washing machines and some clothes dryers.
Installation Instructions
Shannon from Utica, NY
2 Knobs were broken
Knobs purchased for Wash Machine and Dryer. Super easy. Just pushed the knobs on the machines. I made sure that I watched the helpful videos on PartSelect before I did anything though, so I didn't make any mistakes.
PartSelect.com is wonderful. Received the knobs within a day or so.
I'm a very happy customer.
Thanks Read more...
Your Price
$48.85
In Stock
Amana Washer Timer Knob
PartSelect Number PS11752936
Manufacturer Part Number WPW10327522
The timer knob lets you choose the wash cycle.
Your Price
$61.89
In Stock
Amana Washer Selector/Rotary Knob
The belt was the challenge (as should be expected).
The water pump must be removed to replace the belt .
This requires a #25 Torx bit and an awkward position.
I dicided to drop the motor and pump together to gain easier access to the pump mounting screws.
This was definately the key to success. Read more...
PartSelect Number PS11741906
Manufacturer Part Number WP36701W
This knob accepts a D-shaped shaft.
Installation Instructions
Tim from Loomis, CA
Washer wouldn't cycle properly and squeaked
The knob and timer were a piece of cake to replace. Amana designed this machine for extremely easy access to the control panel area (i.e. timer)The belt was the challenge (as should be expected).
The water pump must be removed to replace the belt .
This requires a #25 Torx bit and an awkward position.
I dicided to drop the motor and pump together to gain easier access to the pump mounting screws.
This was definately the key to success. Read more...
Related Amana Washer Parts
- All Amana Washer parts
- Amana Washer Agitators
- Amana Washer Belts
- Amana Washer Brackets and Flanges
- Amana Washer Caps and Lids
- Amana Washer Circuit Boards and Touch Pads
- Amana Washer Dispensers
- Amana Washer Drums and Tubs
- Amana Washer Hardware
- Amana Washer Hinges
- Amana Washer Hoses and Tubes
- Amana Washer Latches
- Amana Washer Legs and Feet
- Amana Washer Motors
- Amana Washer Pulleys
- Amana Washer Pumps
- Amana Washer Seals and Gaskets
- Amana Washer Springs and Shock Absorbers
- Amana Washer Switches
- Amana Washer Transmissions and Clutches
- Amana Washer Valves
- Amana Washer Wire Plugs and Connectors