Whirlpool Washer Dryer Combo Switches

Videos!

Your Price

$34.76

Whirlpool Washer Dryer Combo Dryer Door Switch

★★★★★

468 Reviews

PartSelect Number PS11741701

Manufacturer Part Number WP3406107

This dryer door switch is a simple on/off switch mechanism that prohibits the dryer from operating when the door is open, and operates the drum light. White in color and 6.5 inches long, this OEM switch is comprised of plastic and metal, and features the switch and three wires that comprise the part. Sold individually, this part attaches to the inside of the top end of the front panel. One end attaches to the wiring harness, the other goes through the panel to make contact with the door when the door is closed. Over time, this part can be subject to material fatigue or breakage due to frequent use or rough handling. If it breaks or is defective, you won't be able to start or stop your drying cycle, depending on the position your switch broke in. The easiest way to test this part for functionality is to test it by hand. Push on the black tab that sticks out of the front panel to make contact with your dryer door; if there is no resistance in the tab and it doesn't make a click sound, you may need to replace it.

Fixes these symptoms

Door won’t close
Light not working
Running With Door Open
See more...

Installation Instructions

pat from lisbon,, OH

door switch was bad

i was able to go on line with your company , find my dryer, order the part and had it the next day. fast , great , service Read more...

Your Price

$55.64

Whirlpool Washer Dryer Combo Water Level Switch

★★★★★

2 Reviews

PartSelect Number PS11754877

Manufacturer Part Number WPW10448876

This part is located behind the control panel. It helps determine the level of water in the washer. As the water fills the hose, while tub is filling, it will push the air against a diaphragm inside the switch. More water that enters the tub, more pressure is applied against the switch.

Fixes these symptoms

Draining Issues
Water Filling Issues
Will not drain
See more...

Installation Instructions

George from ORO VALLEY, AZ

Door locked because of faulty water level switch

First some background. The door locked up the first time when appliance was less than one year old. The "Maytag Repairman" finally succeeded in getting the door open after propping up the front of the machine and fumbling around underneath for a period of time and then assured me the problem was solved. The problem recurred less than a year later, and I called another repairman who seemed to have an easier time of it, and charged $293.42 to replace the water level switch. About six months later the same problem recurred and I took the cover off the top of the machine and found there a booklet "For Service Technician's Use Only". VERY HELPFUL. Told how extremely easy it was to unlock door - took about five seconds. Replacing the switch itself involved pulling one tubing off and disconnecting one elec connection from old switch and replacing on new switch. Total cost $50 plus a few dollars for shipping. Read more...

Videos!

Your Price

$18.41

Whirlpool Washer Dryer Combo Push-To-Start Switch

★★★★★

18 Reviews

PartSelect Number PS11742178

Manufacturer Part Number WP3977456

This push-to-start switch activates the dryer when the button is pressed and released. If your switch is not turning on or off, will not start, or the contacts inside the switch are shorted out, it is best to replace this part as a possible solution. Remember to unplug your appliance before beginning the installation process, as safety precaution. For installation instructions and accurate guidance, refer to the diagram provided by the manufacturer.

Fixes these symptoms

Won’t Start
See more...

Installation Instructions

Dennis from Port Orchard, WA

Broke start switch while moving

Turned off the power.Pulled the dryer out, removed the screws from the control cover panel, unplugged the switch, pressed the release clip the did the opposite to install new switch. Replaced the back panel, put the nob on and it looks as good as new.Turned on the power. Read more...

Videos!

Your Price

$23.74

Whirlpool Washer Dryer Combo Lid Switch

★★★★★

16 Reviews

PartSelect Number PS11723153

Manufacturer Part Number W10820036

This 3 prong lid switch is used for washing machines that do not have a tub light.

Fixes these symptoms

Will not agitate
Will not drain
Will Not Start
See more...

Installation Instructions

Peter from Westbury, NY

washer would not start

To see if the lid switch was the problem I first jumped it out and tried to start the washer. That was the problem. I removed the main controll so I could get to the lid switch. I made the mistake of removing the screws all the way out and the metal clip fell into the body of the washer, no problem since I was changing the drive beld anyway. I realized that you do not remove the screws all the way out, you just have to loosen them and then slide out the lid switch & then replace it. Read more...

Videos!

Your Price

$66.22

Whirlpool Washer Dryer Combo Push-to-Start Switch

★★★★★

15 Reviews

PartSelect Number PS11748542

Manufacturer Part Number WPW10117655

This switch or push to start switch is used for dryers. It is the tool that completes the circuit and ultimately starts the dryer by pressing and releasing the button after selecting a setting on the timer. The tools needed for this project are a 1/4 inch nut driver, and a flathead screwdriver. To repair, first remove the rear panel and start switch. Next, replace with new start switch and rear panel. Remember to unplug your dryer before beginning this installation and refer to the manual provided by the manufacturer for further installation instructions.

Fixes these symptoms

Won’t Start
See more...

Installation Instructions

Josh from Emory, TX

Push to Start switch burned out due to electrical problem

Unplug from the wall ,remove upper back panel ( watch out for the grounding wire screwed to the panel), pulled off front knob, then twist and pull the switch out. Unplug the burned out switch, plugged in the new one. Re-assembled what I took apart, plugged her up and dried the load that was in the washer. Note: if yours is burned out due to house power surge make sure the timer is working after you replace the switch, you might need one of thoes too. Read more...

Videos!

Your Price

$17.61

Whirlpool Washer Dryer Combo SWITCH-PTS

★★★★★

2 Reviews

PartSelect Number PS11754549

Manufacturer Part Number WPW10420741

Installation Instructions

Diane from HGHTN LK HTS, MI

Thought it wad the start switch $23.00

Paid an extra over night fee Friday $24.00 didn't get it until Tuesday afternoon all in all it cost $51.00 then that wasn't the problem. Read more...

Videos!

Your Price

$42.13

Whirlpool Washer Dryer Combo Push-To-Start Switch - 2 Terminal

★★★★★

11 Reviews

PartSelect Number PS11741476

Manufacturer Part Number WP3395382

This part is used to start the dryer once you have selected a setting on the timer.

Installation Instructions

Donald from Kanona, NY

Dryer would run without pushing the Start Button

Turn off the circuit breaker ( Or remove the Fuse/s )to the dryer,

Removed 2 screws that hold the control cluster to the dryer top. Then I slid the control cluster forward and up to release it from the dryer. then I removed the start button knob to the start switch by pulling on it straight out. Next I removed the six 1/4" hex head screws from back of the removed control cluster. Then using a flat bladed screwdriver I pried up the tab coming off the switch housing. just enought to allow the switch to be turned a quarter of a turn counter clockwise which allows the switch to be removed from the back of the control cluster. Next with a pair of long nose pliers gently pull straight up on the 2 wire terminals attaching wires to the switch. Make a diagram before removing them so that they can be put on the new switch in the same way. Then orient the new switch with its tab located a quarter turn counter clockwise from the hole you pried the old switch tab from. push down on the switch while turning it clockwise 1/4 turn so the tab on the switch drops into it's locking hole. Then using your diagram put the wire terminals back on the switch terminals in the same order and position they came off. Replace the Control panel with the screws you removed. Next position the control panel feet over the holes for them in the top of the dryer and push back a little on the panel to lock it in the correct position. Then take the two longer screws and put one on each side of the panel at the correct angle (not straight up and down) but tilted forward to match the holes and carefully tighten the screws. Next carefully replace the push to start knob on the new switch. Turn the Circuit Breaker (or reinstall the Fuse/s) for the Dryer back on. Then test and make sure that when you select the cycle and the door is closed that pushing the start switch causes the dryer to start. You have done it! Read more...

Your Price

$67.86

Whirlpool Washer Dryer Combo RELAY-PTS

★★★★★

4 Reviews

PartSelect Number PS11756343

Manufacturer Part Number WPW10563095

Installation Instructions

John from DUBLIN, OH

Off/On pushin switch was broken

Made a BIG mistake ordered replacement part based on Model number of dryer. The part I received was wrong. Took out the broken part and found a part number on it. Reordered a new part based on that number. When it arrived, replacement took about 15 minutes. Lesson learned: see if number on part to be replaced. Don't trust the Model number. Read more...

Your Price

$51.59

Whirlpool Washer Dryer Combo Lid Switch Kit

★★★★★

10 Reviews

PartSelect Number PS11741198

Manufacturer Part Number WP3355458

The point of the lid switch is for the tub to stop spinning when the washer lid is opened.

Fixes these symptoms

Will not agitate
Will not drain
Will Not Start
See more...

Installation Instructions

Pam from San Diego, CA

Washer stopped before rinse cycle

My husband actually did the repairs all I know is he removed the lid, removed the old switch and put in the new one. My washer works now and thats all I care about. I thank you for having the part and at a reasonable cost we were able to repair our washer considering it is twin stackable and is over 10 years old.
Thanks again!!!! Read more...