Whirlpool Range Wire Plugs and Connectors

Your Price

$13.42

Whirlpool Range Surface Burner Plug-In Block Kit

★★★★★

18 Reviews

PartSelect Number PS340571

Manufacturer Part Number 330031

The surface burner plug-in block kit features a newer-style terminal block. This kit is designed for use with ranges and cooktops. This terminal block is how the coil element on your stove connects to the inner wiring of your appliance. Without this connection your burner element would not get the electrical current it needs to heat up. When your element will not heat at all, or if it is not heating properly it is likely an issue with the terminal block. You need to remove the element to replace this part. While you have the element out, inspect the element and the terminal for any corrosion, arcing, or discoloration. If you notice any damage to the element or the terminals we recommend you replace this part as well. This kit includes two metal brackets, two pre-crimped high-temperature wire leads, two ceramic wire nuts, two heat-shrinking insulators, and a mounting screw. Before you begin this repair, make sure you have unplugged your appliance.

Fixes these symptoms

Element will not heat
See more...

Installation Instructions

Jon from Oakley, CA

Surface elements quit working

Drilled out old and broken hold down clips, installed new ones(4). Cut old wires attached to surface plug in block, striped wires, and attached new plugin kit(4), warmed up heat shrink with a hair dryer, put in new drip bowels, the stove is like new.
I ordered the parts on line early one morning, the next day they were at my door and installed that day, everything that I ordered was there, and fit properly.

Way to go Part Select.com

Jon Read more...

Videos!

Your Price

$13.91

Whirlpool Range Surface Burner Receptacle Kit

★★★★★

19 Reviews

PartSelect Number PS1570190

Manufacturer Part Number 12001676

The tools you will need to replace the surface burner receptacle kit on your range include a Phillips screw driver, and a pair of wire strippers. Before doing this repair, make sure to disconnect your appliance from the power supply and wear work gloves to protect your hands. The surface burner receptacle kit comes with a plastic block, high temperature wire nuts, a metal bracket, and wires. This part functions as the connection between the wire harness and the surface element in your range.

Fixes these symptoms

Element will not heat
Will Not Start
See more...

Installation Instructions

Richard from Carthage, NC

Stove top element not working due to bad receptacle.

Turned off the power at the breaker box, cut the wires approximately 5 inches from the bad receptacle and removed it after removing one screw. Stripped back the wires about 1/2 inch and attached the new wires with the ceramic wire nuts provided and secured the receptacle back in place with the new screw provided in the kit.
My sister's husband wanted to scrap the whole range but I repaired it with $14.00 worth of parts.
The element is working great now.
Whenever I need appliance parts again I'll use partselect.com. Read more...

Videos!

Your Price

$34.09

Whirlpool Range Terminal Block

★★★★★

17 Reviews

PartSelect Number PS11750972

Manufacturer Part Number WPW10245259

This part is for oven ranges, it connects individual wires and protects the device from electrical surges, voltages, and current. With this part, the house power is connected to the range wire harness. Some symptoms replacing the terminal block could be a solution for are little to no heat when baking, element will not heat and/or it will not start. This part will prevent loosening and will reduce damage caused by corrosion (by two different metals). Refer to the instructional diagram for further replacement guidance and exact placement. You must unplug the appliance before installing this part and wear gloves to protect your hands.

Fixes these symptoms

Element will not heat
Little to no heat when baking
Touchpad does not respond
See more...

Installation Instructions

Joseph from Decatur, GA

Burned terminal block and filter board

Removed and replaced above named parts, rewired.Be sure to tighten all nuts that secure wires. I believe this is what caused the problem. Read more...

Videos!

Your Price

$38.11

Whirlpool Range Receptacle Kit

★★★★★

11 Reviews

PartSelect Number PS389217

Manufacturer Part Number 814399

This assembly of parts is a surface burner receptacle kit, and is used in conjunction with your range. The assembly comes with two wires, two wire nuts, two pieces of heat-shrink tubing, and the receptacle. If your element is not heating, you may need to replace your surface burner receptacle. The function of this part is to connect the surface element to the wire harness. The tools you will need for this installment include a number two square-head screwdriver or a number two Phillips screwdriver, a pair of wire strippers and crimpers, and a heat gun.

Fixes these symptoms

Element will not heat
See more...

Installation Instructions

Tim from Pittsford, NY

Stove would not heat up

Cut old wires to receptacle, striped the wires, wire nutted to new receptacle, screwed new receptacle into stove and installed heating element.

Piece of cake, but then again my degree is in electrical engineering so I should be able to handle a couple of wire nuts. Read more...

Your Price

$19.60

Whirlpool Range Terminal Block

★★★★★

12 Reviews

PartSelect Number PS11747341

Manufacturer Part Number WP9761958

This is the terminal block for the power cord on an electric range.

Fixes these symptoms

Element will not heat
Will Not Start
See more...

Installation Instructions

Wesley from Spring Hill, FL

stove/oven started popping like the 4th of July while on

Terminal block burned up along with 220 cord & front burner. With breaker off, disconnected the block & cord....and assembled new parts. Next, took 2 screws out of stove top and lifed stovetop up. Disconnected bracket holding burner-took off old burner & reattached new burner. Reattached bracket and put back screws..turn on breaker and everything is like new. Do not recommend service companies to do these repairs. Excellent service with this company on receiving parts within 24 hours. Original manufacturers mark up their prices 30-40% more...Part Select is the way to go. Thank you for your execellent service. Read more...

Videos!

Your Price

$24.59

Whirlpool Range Main Power Terminal Block

PartSelect Number PS11745232

Manufacturer Part Number WP8203546

Sold individually.

Fixes these symptoms

Will Not Start
See more...

Installation Instructions

Frank from Silverhill, AL

lighting strike

replaced the suppressor and terminal block oven works Read more...

Your Price

$86.70

Whirlpool Range Meat Probe Receptacle

PartSelect Number PS1486371

Manufacturer Part Number 8186589

This is just the receptacle. Meat probe is sold separately.

Your Price

$7.59

Whirlpool Range Mounting Clip

PartSelect Number PS11742373

Manufacturer Part Number WP4332752

This mounting clip is for the surface burner receptacle of your electric range. Sold individually.

Fixes these symptoms

Element will not heat
See more...

Installation Instructions

ROBERT from ARVADA, CO

Intermittant Operation Of Surface Burner

I first tripped the power circuit breaker. Then I unplugged and removed the old element. Removing one screw allowed me to remove and replace the mounting clip. This did result in breaking off a small piece of plastic-like material from the electrical housing to which the clip was attached but did not hinder the replacement of the new clip. I inserted the new burner element. The surface burner is now working fine. Read more...

Your Price

$71.30

Whirlpool Range Element Receptacle Assembly

PartSelect Number PS11744184

Manufacturer Part Number WP74007474

This part connects the surface burner to the wiring harness.

Fixes these symptoms

Element will not heat
See more...

Installation Instructions

Daniel from Great Falls, VA

Range element receptacle had shorted out

(1) Disassembled range element cartridge unit by removing six machine screws on sides
(2) Removed old element receptacle assembly (note screww attaching the clip to ring was corroded and had to be drilled out and replaced - screw not included), retaining existing element (determined it was good)
(3) Fited up new element receptacle assembly and determined how far the new wires would go, cut the old wires at appropriate point (allowing for wire splice).
(4) Attached new element receptacle assembly using a machine screw I found in my collection
(5) Routed new wires though retaining clips, and spliced into old wires near the cartridge plug (note: be sure to use high temp splice nuts - not supplied in kit)
(6) Installed old element into new receptacle and tested by measuring resistance - element resistance should be about 12 ohms, with all connections to ground reading infinity)
(7) Reassembled cartrige assembly using six machine screws previously removed (note, make sure the part align properly - top inside the bottom)
(8) Put the assembly back on range - worked great! Read more...