Enter the code DIYDAD10 at checkout to apply your discount. Discount will be applied at checkout when the code is entered & applies to all parts. Cannot be combined with any other coupon or special offer & cannot be applied to a previously placed order. Not valid toward tax or shipping & handling. Discount has no cash value. Discount expires on June 17 at 11:59pm EST.
Whirlpool Dishwasher Bearings
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Whirlpool Dishwasher Bearings
Your Price
$13.73
In Stock
Whirlpool Dishwasher Spray Arm Seal
PartSelect Number PS11745444
Manufacturer Part Number WP8268433
This seal is located between the spray arm and the water feed tube.
Fixes these symptoms
- Leaking
- Noisy
- Not cleaning dishes properly
- See more...
Installation Instructions
Clifford from Centennial, CO
Glasses in the top shelf had food bits - not rinsing well
The most difficult part of this was figuring out the problem was with the middle spray arm - that it was not spinning (and thus not rinsing the top dishes). I could spin it by hand fine - but if I watched its position while the machine was running (open/close the door) I saw it wasn't moving. I took out the top shelf (with spray arm attached) and connected it to the garden hose. I could see then that the arm was sagging and hitting the rear connection, preventing it from spinning. To replace I removed the plugs from the top shelf side-rails (bend the rail open with your thumb and tip the plugs out of the rail to the right for the left rail, to the left for the right rail. this is easier than pulling them out the end of the rail). Slide out the top shelf. Turn over, remove the phillips screw and pull off the manifold, and middle spray arm. Replace with the new parts. I also replaced the top spray arm (which was very loose, and probably not spraying well because it was so loose). For this I unclipped the top feed tube and pulled off the old sprayer. Put a towel in the bottom rack of the washer so you don't drop the little pieces into the pump below. The top spray arm simply snaps in with the two connectors (the pointy one attaches through the feed tube).
Read more...
Your Price
$6.90
In Stock
Whirlpool Dishwasher Bearing, Spring, (2)
PartSelect Number PS11741317
Manufacturer Part Number WP3373234
Sold Individually. This is what your door spring would hook into and it prevents the metal spring from rubbing against the metal on the side of the door.
Fixes these symptoms
- Door latch failure
- Door won’t close
- See more...
Related Whirlpool Dishwasher Parts
- All Whirlpool Dishwasher parts
- Whirlpool Dishwasher Brackets and Flanges
- Whirlpool Dishwasher Caps and Lids
- Whirlpool Dishwasher Circuit Boards and Touch Pads
- Whirlpool Dishwasher Dishracks
- Whirlpool Dishwasher Dispensers
- Whirlpool Dishwasher Doors
- Whirlpool Dishwasher Ducts and Vents
- Whirlpool Dishwasher Filters
- Whirlpool Dishwasher Handles
- Whirlpool Dishwasher Hardware
- Whirlpool Dishwasher Hoses and Tubes
- Whirlpool Dishwasher Latches
- Whirlpool Dishwasher Motors
- Whirlpool Dishwasher Panels
- Whirlpool Dishwasher Pumps
- Whirlpool Dishwasher Racks
- Whirlpool Dishwasher Seals and Gaskets
- Whirlpool Dishwasher Spray Arms
- Whirlpool Dishwasher Springs and Shock Absorbers
- Whirlpool Dishwasher Switches
- Whirlpool Dishwasher Wheels and Rollers
- Whirlpool Dishwasher Wire Plugs and Connectors