Washer Dryer Combo Hinges

Your Price

$76.42

Washer Dryer Combo HINGE

★★★★★

3 Reviews

PartSelect Number PS11711929

Manufacturer Part Number MEF62782201

This silver hinge supports your dryer door on the front panel. These hinges are located on both sides of the dryer door and help it open and close smoothly. Over time, with frequent use, the hinges can wear down, causing them to become less effective at rotating. Additionally, lint or moisture buildup can make the hinges harder to move. Please note that this genuine OEM replacement part does not include the necessary screw for installation. You will need to reuse the original screw or order it separately.

Fixes these symptoms

Door won’t close
See more...

Installation Instructions

Ricky from CHESAPEAKE, VA

Dryer door hinge broken

Opening the dryer door on the vertical axis rather than the horizontal axis, I unscrewed the three obvious screws. These screws are clearly visible when viewed from eye level. The broken hinge came off in two pieces, but presented no difficulty. I inspected the area around the hinge for auxiliary damage. There was none, but I did notice a wisp of cotton candy stuck in the lint trap. This was odd as I had not had cotton candy of any kind in my home or near my dryer ever. I did hear the faint sound of calliope music-I assumed this to be from an ice cream van that frequents the neighborhood-but failed to detect the tell-tale doppler effect of a moving vehicle. Disturbed, but determined to finish my task I removed the new part from the packaging and checked the fit. It fit perfectly. NOTE: Retain the screws from the hinge you remove, as the replacement hinge does not come with screws. I looked down to where my screws lay and saw the bulbous oversized toe of large red shoe. There was a star on the tip, painted in blue and yellow. I looked up from the shoe to see it attached to an ankle with a frilled cuff and up from there a baggy pair of pantaloons. At this point I realized that circuses now being illegal in this country, I clearly had a rogue clown on my hands. Sitting as I was I was not able to quickly get up, and in the confines of my washroom I had nowhere to run anyway. I had to think fast. I could smell the stale popcorn on the clown's breath as he leaned over, I reached for anything I could, grabbing up a pet cleaning vacuum hose. The clown just snorted and said, "You want a Phillip's head for that." The clown was right, of course. I installed the screws, checked that the door worked, and then the clown and I went for churros. Read more...

Videos!

Your Price

$7.70

Washer Dryer Combo Washer Lid Bumper

★★★★★

3 Reviews

PartSelect Number PS11738875

Manufacturer Part Number WP212716

This washing machine lid bumper is just under an inch long. It is all gray in color and is made entirely of rubber.

Installation Instructions

eunice from prestonsburg, KY

lid closing to far bumpers missing and fuse block cracked

unhooked power plug removed 2 top screws tilted topfront panel back removed cracked fuse holder replaced with new fuse holder put top cover back on installed 2 top screws plugged in power cord done! Read more...

Videos!

Your Price

$80.45

Washer Dryer Combo Hinge

★★★★★

3 Reviews

PartSelect Number PS3523444

Manufacturer Part Number 4774EL2001A

Fixes these symptoms

Door won’t close
See more...

Installation Instructions

Raul from CYPRESS, CA

Dryer door hinge broke.

Followed YouTube video repair process. The only problem is that the door hinge has plastic bushings attached. A couple broke and the parts listing does not show the bushings, nor does the hinge come with them. The door is a bit loose without them. Nonetheless, the repair did the job for now. Read more...

Videos!

Your Price

$7.95

Washer Dryer Combo Lid Bumper

★★★★★

4 Reviews

PartSelect Number PS11747040

Manufacturer Part Number WP9724509

This gray and white washer lid bumper contains a rubber bottom and is sold individually.

Installation Instructions

Nicola from Centreville, MD

Washer would not run, lid switch broken

Repair was easy. Removed two side panels on the control plate. Removed two phillips screws that hold the control panel to the body of the washer. Disconnected the electic connection to the wires leading to the lid switch. Three sided of the lower cover lift over and removed from the washer frame. Access to the lid switch and wire retainers was easy. Removed two screws holding the remaining parts of the switch and replaced with new. Re-routed the wires through the retainers. Set the sides back on making sure the set all the way back in the frame and fit properly into the plastic strips on the back of the washer. Reconnected wires, screws and end caps. Read more...

Your Price

$11.17

Washer Dryer Combo HINGE

PartSelect Number PS7321743

Manufacturer Part Number 4774EN3002A

This is a locking pin, and it works in conjunction with your washer. The part measures to be roughly 3 inches long, and less than an inch wide. The pin is cylindrical, off-white in color, and made entirely of plastic. This part is used to hold the shock absorber on the washing machine. There is a pin used at the bottom and top of the shock absorber. This model is sold individually. If your washing machine is experiencing an above-average amount of shaking and moving this part may be the reason.

Installation Instructions

Donette from Klamath Falls, OR

Noise and vibration when spinning

Used a video to explain how to do repair. Video showed about 1 1/2 hours, took probably 4 hours at least. Bearings were very difficult to remove and were in very bad shape for a 4 1/2 year old washer. We were very lucky and did not have a spider that needed to be replaced. All and all not to bad of a repair, but without the video we found it would have been a guessing game of how to do the repair. Parts all worked well and the washer is now quiet as a mouse in the spin mode. Spending $200.00 instead of a new washer was the goal and it was completed. Here's hoping to more than 4 additional years before another repair is required. Read more...

Your Price

$11.10

Washer Dryer Combo Lid Hinge Bearing

PartSelect Number PS11738874

Manufacturer Part Number WP21258

This is the bearing for the lid hinge. Sold individually.

Fixes these symptoms

Lid or door won’t close
See more...

Installation Instructions

Enrique from Miami Shores, FL

spin cycle did not activate

Replaced hinge switch. Still no spin cycle. Noticed hinge bearing cracked & if hinge forced into switch, spin activated. Ordered new hinge bearings.Spin cycle still didn't engage. On further examination, observed that hinge was bent. Straightened hinge & worked like a charm. Didn't really need new switch or bearings. NOTE : Avoid having washer door bang shut.Took longer than expected, but each procedure was simple. Read more...

Videos!

Your Price

$8.13

Washer Dryer Combo Door Hinge

★★★★★

1 Review

PartSelect Number PS8756812

Manufacturer Part Number WE1M1033

Screws NOT included.

Fixes these symptoms

Door won’t close
See more...

Your Price

$8.28

Washer Dryer Combo HINGE

★★★★★

2 Reviews

PartSelect Number PS7795474

Manufacturer Part Number MEF62462101

Your Price

$180.05

Washer Dryer Combo Door Hinge

PartSelect Number PS11750143

Manufacturer Part Number WPW10198417

Installation Instructions

Richard from KIRKLAND, WA

Broken hinge MayTag coin-op

Removed two hex head bolts, lift the door straight up, remove. loosened 8-10 screws around the inner side of glass door, slid hinge in and tightened 8-10 screws. Attach the door and screw the two hex head bolts back in. That's it! Read more...