Tappan Freezer Trays and Shelves

Your Price

$14.50

Tappan Freezer Shelf Support - Left Side

PartSelect Number PS977266

Manufacturer Part Number 297001600

This is a shelf support for the left side of a freezer. It is used to help support the inside of the shelf from both sides. *Please note: right and left side of shelf support are sold separately. If the shelf in your fridge is unstable, replacing this part could be the solution. Make sure to unplug the refrigerator or freezer from the power source before beginning this replacement project and safely store food. Follow the instructions in the diagram provided by the manufacturer for further instructions and guidance.

Installation Instructions

shari from west sand lake, NY

Plastic shelf supports broken

Needed to remove both left and right broken (plastic) supports and reinsert the new parts. Not hard at all...worked like a charm! Read more...

Your Price

$14.50

Tappan Freezer Shelf Support - Right Side

★★★★★

2 Reviews

PartSelect Number PS977265

Manufacturer Part Number 297001500

This is a shelf support for freezers. It is used to help hold the inside of the shelf from both sides (left and right.) Please note: right and left side of shelf support are sold separately. If the shelf in your fridge is not leveled and is unstable, changing this part could be the solution. Make sure to unplug the refrigerator from the power source before beginning this replacement project and safely store your food. Follow the instructions in the diagram provided by the manufacturer for further instructions and guidance.

Installation Instructions

Gregory from NEW ORLEANS, LA

Stop basket and right side shelf support were broken.

Used needle nosed pliers to twist and pull out remainder of broken parts (regular pliers would work, fingers might). Used fingers to insert replacements. So, simple, so glad I did it! Read more...

Your Price

$36.49

Tappan Freezer Door Shelf End Cap Set - Left and Right Side

★★★★★

4 Reviews

PartSelect Number PS469917

Manufacturer Part Number 5303925377

This assembly is the door shelf end cap set for the left and right side of your refrigerator. The function of the door shelf end cap is to attach the inner door liner to the door shelf rail. This will then hold the door shelf rail in place and keep it stable. To make this installation you may need a pair of pliers, other than that the parts will easily snap in and out of place. These pieces are white and measure almost 2 inches long, 1 inch high, and 1.5 inches wide.

Installation Instructions

STEPHEN from CAMP VERDE, AZ

Broken Slelf Ends In Freezer

Inserted end pieces and remounted old refrigerator bar Read more...