Official Tappan Cooktop Parts

Your Price

$12.59

Tappan Cooktop Drip Bowl - 8"

★★★★★

100 Reviews

PartSelect Number PS437595

Manufacturer Part Number 316048413

This chrome drip bowl is designed for use with electric cooktops and ranges. This drip bowl is sold individually. At the widest point this part has a diameter of approximately 10 inches. It sits beneath the surface burner element. It catches any drips or spills coming from the cookware on your burner. Because the cooktop is a high-traffic area of the kitchen, these bowls often get damaged, or get so dirty they can no longer be adequately cleaned. When replacing this part you need to remove the burner element. While you have it out we recommend inspecting the terminals and the element for any corrosion, arcing, or discoloration. Any of those things could be a sign of a bigger problem, and it indicates that the element and terminal block should be replaced.

Fixes these symptoms

Element will not heat
See more...

Installation Instructions

John from Nisswa, MN

Old pans/bowls were corroded

Very easy---simply unplug the burners, remove the old pans and replace with the new ones

I was extremely pleased with the easy ordering and prompt delivery of parts that actually fit as they should! Read more...

Chrome Drip Bowl - 6" – Part Number: 316048414

Your Price

$7.46

Tappan Cooktop Chrome Drip Bowl - 6"

★★★★★

78 Reviews

PartSelect Number PS437596

Manufacturer Part Number 316048414

The drip bowl catches grease and spills that come from cooking on your stove top. They are located under the heating elements. Drip bowls are often neglected and can become rusted and cracked. If your drip bowl is damaged, it could allow grease, food, or other spills to drip inside your range. This could become a fire hazard. This 6 inch chrome drip bowl fits most electric ranges. Before you replace your damaged drip bowl, make sure the element is turned off and cool to the touch. To replace the drip bowl, remove the element, replace the current drip bowl, and reattach the element. This part is sold individually.

Fixes these symptoms

Element will not heat
See more...

Installation Instructions

John from Nisswa, MN

Old pans/bowls were corroded

Very easy---simply unplug the burners, remove the old pans and replace with the new ones

I was extremely pleased with the easy ordering and prompt delivery of parts that actually fit as they should! Read more...

Videos!

Terminal Block Kit – Part Number: 5303935058

Your Price

$16.24

Tappan Cooktop Terminal Block Kit

★★★★★

37 Reviews

PartSelect Number PS470125

Manufacturer Part Number 5303935058

This part connects the wire harness to the surface element and is used for ranges. The kit includes interchangeable mounting brackets, ceramic wire nuts, heat shrink protective tubing, and wires. If your range/oven is having symptoms such as burner not heating, heating elements not working, burning smell, or if the oven is making a buzzing noise then this could be the solution. The tools needed to replace the kit are wire strippers, a heat gun or hair dryer, and #1 square heard screw driver. Refer to the installation/instructional video for further guidance to accurately replace the element.

Fixes these symptoms

Element will not heat
Oven not heating evenly
Will Not Start
See more...

Installation Instructions

Steven from Taylors, SC

rental property stove only had 2 working burners and bottom drawer off track

first i took out burners then i took out the screws of the termnal block bracket. i then raised the lid on the stoveand clipped the wires on all 4 of the terminal block kits.i then slipped the shrink wrap on wires and used the wire nuts to connect wires together then heated the shrink wrap. I then put screws back in terminal block brackets. I then put the burners on while looking under lid so i would know they were making good connections as this is a bad design from factory. if you pull out burners to clean them and they are not put back in right you dont have a good connection and that causes the terminal blocks to get hot and melt. thats what happened in my case.
As far as the drawer glides they just snap into place Read more...

Your Price

$8.92

Tappan Cooktop Drip Pan

★★★★★

4 Reviews

PartSelect Number PS454077

Manufacturer Part Number 5303131115

This drip pan is designed for gas cooktops and ranges. The pan has an approximate diameter of 8 inches, and the hole in the middle has a diameter of roughly 4 inches. The purpose of this part is to catch the drips and spills coming from the cookware on your stove. Burners are used frequently and these pans can get quite dirty. If yours will no longer come clean, or if it is damaged, this is the replacement you need. Before putting the burner head assembly and burner grate back on, make sure the drip pan is flush with the cooktop. When repairing your range or cooktop, make sure it is unplugged and the gas is shut off.

Installation Instructions

Mariano from Torrance, CA

Very old burner grates & drip pans, need replacement.

Took out the old & easily replace it with the new set. No tools required. Read more...

Burner Switch Kit – Part Number: 5303935086

Your Price

$40.14

Tappan Cooktop Burner Switch Kit

★★★★★

8 Reviews

PartSelect Number PS470145

Manufacturer Part Number 5303935086

This is a burner switch kit, also known as the surface element control switch repair kit, for ranges. This burner switch kit sends voltage to the surface element coil and it controls the stove top surface burner. If the following symptoms occur, installing the switch could be the solution to the problem: surface element not heating, overheating, or inconsistent heating. Usually, if the element is not defective, that is a sign there is an issue with the switch. The kit comes with several insert sizes, and includes screws as well. The tools needed for this project are a nut driver, pliers, and screwdrivers.

Fixes these symptoms

Element will not heat
See more...

Installation Instructions

George from New Port Richey, FL

High heat reluctant to turn down.

Most of the job is simple fastener mechanics.
Use a nut driver or Phillips screwdriver. Remove rear panel.

Pull out control knob. If it is stuck, wrap a small rag around the back of it and pull the rag steadily.

Carefully match marked terminals on the replacement switch with those on original. Switch terminals may not be in the same location. Replace wires one for one, one at a time.

Carefully select the correct knob filler for the switch post. Several are supplied. Proceed with logic and measure the shaft length and the filler length and type to match. Read more...

Burner Pan Gasket – Part Number: 318053901

Your Price

$24.26

Tappan Cooktop Burner Pan Gasket

PartSelect Number PS442167

Manufacturer Part Number 318053901

Surface Burner Igniter Electrode – Part Number: 316011200

Your Price

$32.04

Tappan Cooktop Surface Burner Igniter Electrode

★★★★★

4 Reviews

PartSelect Number PS436633

Manufacturer Part Number 316011200

Use this igniter with sealed burners.

Fixes these symptoms

Element will not heat
Gas igniter glows, but will not light
Will Not Start
See more...

Installation Instructions

Mariano from Torrance, CA

Very old burner grates & drip pans, need replacement.

Took out the old & easily replace it with the new set. No tools required. Read more...

Your Price

$37.34

Tappan Cooktop Burner Grate

★★★★★

2 Reviews

PartSelect Number PS437719

Manufacturer Part Number 316055800

This is a burner grate for your surface burner, and it is compatible with your range stove top. The purpose of this part is to provide a balanced and stable surface for you to set your cookware on while cooking on your stove. The color of the burner grate is black, and it has a diameter of 6.5 inches. This part is sold individually and includes only one round gas grate per package. The most common reason for needing to replace this part is if your current burner grate has incurred damage from daily usage.

Installation Instructions

Rusty from Howell, NJ

Igniter porcelain was cracked and burner would not light.

un-pluged stove,removed the one screw holding the broken igniter. disconected the one wire. installed new igniter and slipped on wire. The igniter came with a new bracket, the old one rusted away which is why the old igniter broke. Read more...

Your Price

$94.31

Tappan Cooktop Spark Module

★★★★★

2 Reviews

PartSelect Number PS2350722

Manufacturer Part Number 316135702

This spark module or range spark module, is used in ranges and ovens. The spark module monitors and controls the spark to ignite the surface burner in a range. It does this by sending a certain amount of current to the igniter to produce that spark. If you are not getting any spark to the igniters then it is best you replace this part with a new spark module. To repair, first remove the access panel at the back of your range with a 1/4 inch nut driver to take the screws out. Next, disconnect the power harness that connects the range to the power cord to access the spark module. Take wires off using needle nose pliers and pull the spark module off the range. Match and hook up the wires to the new part. Refer to the manual provided by the manufacturer for further installation instructions and guidance.

Fixes these symptoms

Gas igniter glows, but will not light
Will Not Start
See more...

Installation Instructions

Earl from ALLIANCE, OH

Top burners were not lighting without a match

Was easy...I pulled oven out from the wall so I could get to the back.i used a nut driver to remove small silver cover.matched up wires to the never module and re installed.pluged oven back in and burners lit perfectly Read more...