Scotsman-Residential Ice Maker Hardware

Find Your Part

Model number locator Need help finding your model number?
  • Search your model number to find:
  • Genuine OEM parts guaranteed to fit
  • Free manuals and guides
  • Repair instructions and videos
Scotsman-Residential Appliance Parts

Popular Scotsman-Residential Ice Maker Hardware

Your Price
$7.93
  In Stock
Scotsman-Residential Ice Maker Screw
★★★★★
★★★★★
1 Review
PartSelect Number PS11742721
Manufacturer Part Number WP488729
Metallic screw that is less than an inch long. Does not include the plastic washer.
Installation Instructions
Kyle from Wimauma, FL
Black Cam was bren on lower door hinge
This was a very simple job. Remove the top Hinge bracket, a total of 4 screws, lifted the door off the bottom hinge, removed the bottom hinge set up, 2 screws, replaced it, and attached the new bottom black door cam, lifted the door back onto the bottom hinge and aligned the top hinge, and reinserted the screws, and Ta Da, The door works like a new refrigerator door. 15 to 30 min tops. I did not even have to take the refrigerator items out of there door holder. Read more...
Your Price
$11.12
  In Stock
Scotsman-Residential Ice Maker Screw
★★★★★
★★★★★
1 Review
PartSelect Number PS11745622
Manufacturer Part Number WP8281196
Sold individually.
Installation Instructions
Carol from Monroe, NY
Refrig making a lot of noise
The motor kit had only two wires coming out of it. The existing one in the refrig had 6. I spliced the 2 red to one black on the new part and 2 white to the other black wire on the new part. The two green I attached to a screw. I left the 6 wire harness in place just cut off the plug piece that went into the old motor, and spliced all my wires.
Worked great! Read more...
Your Price
$5.37
  In Stock
Scotsman-Residential Ice Maker Screw 8-18 x 5/8
PartSelect Number PS11741613
Manufacturer Part Number WP3400884
Screw size is 8-18 x 5/8". Used with stand-alone ice cube makers.
Your Price
$7.44
  In Stock
Scotsman-Residential Ice Maker Clamp
PartSelect Number PS11742760
Manufacturer Part Number WP489503
This clamp is sold individually.
Fixes these symptoms
Installation Instructions
Gregory from Louisville, KY
leaking water under back left of washer
The first thing I did was look at the diagrams for my specific appliance on the parts select web site to locate fastners. I removed the front panel(2 screws 4" from floor on front panel), then removed the corner bolts of top panel(found under in front). Next I removed the 4 screws on the control panel (on top). I located the screw holdling the fill injector to the top Lid. Then I removed the clamp holding the unit to the regulator. Assembled the unit and placed it in position. First attaching the fill injector to top panel, then clamping the hose to regulator, then replacing 4 screws in control panel. Next the two corner screws in corners under the top panel. Replaced front panel and 2 screws. Then had a trail run and no water leaks any where. Read more...
Your Price
$11.02
  On Order
Scotsman-Residential Ice Maker Screw 8-18 x 1
★★★★★
★★★★★
1 Review
PartSelect Number PS11742753
Manufacturer Part Number WP489474
Sold individually.
Your Price
$7.97
  In Stock
Scotsman-Residential Ice Maker Screw
PartSelect Number PS11747799
Manufacturer Part Number WP999367
Sold individually.
Your Price
$9.78
  In Stock
Scotsman-Residential Ice Maker GROMMET
PartSelect Number PS11731224
Manufacturer Part Number W10852725
Your Price
$9.78
  In Stock
Scotsman-Residential Ice Maker Nut, Push-In
PartSelect Number PS11743768
Manufacturer Part Number WP692400
Installation Instructions
tselanea from elkton, MD
dryer was not putting out heat
i removed the heater element and put a new one in. Read more...
Your Price
$8.06
  In Stock
Scotsman-Residential Ice Maker Zip Tie
PartSelect Number PS11753208
Manufacturer Part Number WPW10339879
A zip tie, also known as a cable tie or a wire tie, is a fastening device that holds wires or tubing together. If a machine has wires or tubing that are easily shifted, you need to hold them tightly together using a zip tie. It is a flexible, plastic strip that has serrated teeth and a locking mechanism. If the zip tie is damaged, it should be replaced. Freely moving wires may rub against surfaces, causing them to break over time. Zip ties are single-use and may not be reused after they are removed from a machine. To release the locking mechanism, you will need to insert a small flat tool into the head of the zip tie, between the tongue and the serration, and depress the bar. You can then pull the teeth out of the mechanism to loosen the cable tie. This part is produced by the original equipment manufacturer and is sold individually.
  No Longer Available
Scotsman-Residential Ice Maker Fastener, Pushnut
PartSelect Number PS11739661
Manufacturer Part Number WP2208539
Use with stand-alone icemakers.