RCA Refrigerator Trays and Shelves
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular RCA Refrigerator Trays and Shelves
Your Price
$127.09
In Stock
RCA Refrigerator Crisper Drawer Cover
PartSelect Number PS890565
Manufacturer Part Number WR32X10398
The crisper drawer cover sits on top of your vegetable crispers and helps to maintain proper crisper temperatures. It also doubles as a sturdy lower shelf for extra storage in your refrigerator. If the drawer cover is damaged or cracked, it will not be able to do either of its jobs, and should be replaced. This replacement cover features shallow, wide grooves to prevent leaks and to catch spills. It also has rail brackets underneath to hold the drawer, allowing the drawer to slide in and out. It is made with some added structural rigidity that makes it stronger and more durable than the original. This model measures 24 1/2 inches long x 19 inches wide x 2 5/8 inches deep.
Fixes these symptoms
- Door won’t open or close
- See more...
Installation Instructions
Kim from Bronx, NY
Vegetable pan cover broke down the middle
When the cover came to my apartment, I crossed my fingers that the piece would fit . Well, within 5 minutes the old cover was out and the new cover in. And it looks better than new! Finally, I don't have to hold my vegetable drawers up with a D battery!
Read more...
Your Price
$31.02
In Stock
RCA Refrigerator Door Shelf Retainer Bar End Cap - Left or Right Side
PartSelect Number PS298977
Manufacturer Part Number WR2X8345
This end cap is sold individually. It can be used for the right or left side of either the freezer or refrigerator door shelves.
Installation Instructions
Angela from Minneapolis, MN
Door Retainer Bar and End Caps were missing
Placed bar into end caps and slide end caps into slots in the door. Took about 1 minute! Very easy!
Read more...
Your Price
$32.83
In Stock
RCA Refrigerator Retainer Bar End Cap - Left or Right Side
PartSelect Number PS299562
Manufacturer Part Number WR2X9144
Sold individually.
Installation Instructions
rose from cleveland, OH
the little plastic thingy's were broken
I took the broken part off the bar, put the new part on the bar, snapped it into the fridge, threw the old part out, opened the fridge admired my work, while I was ther I grabbed a beer....couldnt have gone better.
Read more...
Your Price
$25.45
In Stock
RCA Refrigerator Door Closing Cam
One false start because I did not realize both of the door-closing cams had disintegrated and I had only ordered the cam without the hinge.
Purchased part 290199 Hinge Assembly. It came with matching door-closing cam. (Had not known so I also purchased the cam 297995 separately). Next time I will know to only purchase the Hinge Assembly.
Replacement procedure took about 20 minutes including removing and replacing door shelves and their contents. Two people involved.
1. Remove all door shelves with contents and other contents on door.
2. Remove the top Phillips head screw holding the decorative plastic on the top.
3. Remove the two top hinge screws on top of refrigerator using metric #8 socket wrench. Second person made sure door did not fall off.
4. Lift the door off the bottom hinge pin. Second person holds door on it’s side.
5. Take off the bottom refrigerator cover
6. Remove the bottom hinge assembly screws using metric #8 socket wrench.
7. Mount the replacement bottom hinge assembly and tighten the two screws.
8. On the door bottom, remove the outer screw and loosen the inner screw using metric #8 socket wrench.
9. Replace the door-closing cam (or what is left of it) with the cam in line with the door and cam bumps away from the door.
10. Place the door back on the hinge pin (one person holds while the other person maneuvers the door bottom).
11. Replace the top hinge and reinsert the screws on top of the refrigerator. Dress the door so that it does not press hard on the rubber door gaskets (or the door will fail to shut automatically). Tighten the screws.
12. Replace the decorative plastic over the top hinge.
13. Open the door and replace the bottom refrigerator cover.
14. Replace the door shelves and all contents.
15 Close the door. Read more...
PartSelect Number PS297995
Manufacturer Part Number WR2X4901
This single door closure cam is mounted on the door, not the hinge.
Fixes these symptoms
- Clicking sound
- Door Sweating
- Door won’t open or close
- See more...
Installation Instructions
Gary from North eastham, AL
Door would not automatically close.
Symptom: Door did not close automatically. Also had found small chunks of black plastic on the floor. Refrigerator door was slightly lower than the freezer door.One false start because I did not realize both of the door-closing cams had disintegrated and I had only ordered the cam without the hinge.
Purchased part 290199 Hinge Assembly. It came with matching door-closing cam. (Had not known so I also purchased the cam 297995 separately). Next time I will know to only purchase the Hinge Assembly.
Replacement procedure took about 20 minutes including removing and replacing door shelves and their contents. Two people involved.
1. Remove all door shelves with contents and other contents on door.
2. Remove the top Phillips head screw holding the decorative plastic on the top.
3. Remove the two top hinge screws on top of refrigerator using metric #8 socket wrench. Second person made sure door did not fall off.
4. Lift the door off the bottom hinge pin. Second person holds door on it’s side.
5. Take off the bottom refrigerator cover
6. Remove the bottom hinge assembly screws using metric #8 socket wrench.
7. Mount the replacement bottom hinge assembly and tighten the two screws.
8. On the door bottom, remove the outer screw and loosen the inner screw using metric #8 socket wrench.
9. Replace the door-closing cam (or what is left of it) with the cam in line with the door and cam bumps away from the door.
10. Place the door back on the hinge pin (one person holds while the other person maneuvers the door bottom).
11. Replace the top hinge and reinsert the screws on top of the refrigerator. Dress the door so that it does not press hard on the rubber door gaskets (or the door will fail to shut automatically). Tighten the screws.
12. Replace the decorative plastic over the top hinge.
13. Open the door and replace the bottom refrigerator cover.
14. Replace the door shelves and all contents.
15 Close the door. Read more...
Your Price
$22.26
In Stock
RCA Refrigerator Door Shelf Retainer Bar End Cap
PartSelect Number PS299579
Manufacturer Part Number WR2X9162
This is a replacement shelf bar end cap. The end cap connects to the shelf bar on either side, and then snaps into position on the freezer door. This will allow you to store items in the freezer door. It is a little more than 2 inches long and is made of white plastic. To replace the end cap, you can simply depress the locking tab and remove the entire bar and end cap assembly. Then, use a flat blade screwdriver to depress the locking tab, and the endcap will detach. Finally, snap the new end cap locking tabs into place, and snap the bar assembly back onto the freezer door. This product is sold individually.
Installation Instructions
Bushnell from Gulf Shores, AL
Your Price
$28.60
In Stock
RCA Refrigerator Door Shelf Retainer Bar
PartSelect Number PS293627
Manufacturer Part Number WR17X3880
This door shelf retainer bar is a manufacturer-approved replacement part for your refrigerator. This bar is made of white plastic and is about 21 1/4 inches in length and 2 inches deep. It helps keep your refrigerator door shelf in place. To access the retainer bar, remove the door bin by pulling it out from the mounting tabs.
Your Price
$83.85
In Stock
RCA Refrigerator Freezer Wire Shelf
PartSelect Number PS305726
Manufacturer Part Number WR71X1936
This part is approx. 14 3 /4" L x 13 1/4" W. Sold individually.
Your Price
$15.17
In Stock
RCA Refrigerator Door Shelf End Cap
The thing I appreciate most about "PartSelect" is that they included pictures. Had it not been for the picture I would have chosen the wrong part. That is, there were two types of the part I wanted which looked very similar except on close inspection. Read more...
PartSelect Number PS298590
Manufacturer Part Number WR2X7674
Sold individually.
Installation Instructions
Charles from St. Augustine, FL
end caps broke causing brace to come out
This was a very easy repair. It did not require any tools. The thing I appreciate most about "PartSelect" is that they included pictures. Had it not been for the picture I would have chosen the wrong part. That is, there were two types of the part I wanted which looked very similar except on close inspection. Read more...
Your Price
$34.94
In Stock
RCA Refrigerator Door Shelf Retainer Bar End Cap - Left or Right Side
PartSelect Number PS298758
Manufacturer Part Number WR2X7975
This end cap can be used for the right or left side of the refrigerator door shelf or the freezer door shelf.
Installation Instructions
Joyce from Flint, MI
freezer door guard broken off
I placed the new part on the end of the freezer door guard and firmly pushed it in until it 'clicked'. Easy as pie! The more difficult part was to remove the broken off part inside the opening of the freezer door hwere the new bar end was to be inserted. I finally used thin nose pliers to reach in and grab the broken off part.
Read more...
Your Price
$36.29
In Stock
RCA Refrigerator Freezer Door Retainer Bar
PartSelect Number PS293475
Manufacturer Part Number WR17X3692
End caps for this bar are sold separately.
