Sprocket 610323001

This sprocket is an OEM replacement part for use in chainsaws and pole saws. It is a key component of the chain drive system. The sprocket is a toothed wheel, with a diameter of 1 inch, that is responsible for driving the chain around the bar, allowing it to rotate and cut through materials. It is found at the end of the engine crankshaft. The sprocket can fail if it is inadequately lubricated, if it impacts a hard object, or if its teeth are worn down. A failed sprocket will cause the chain to move slower, slip, or fail to rotate altogether. You will also notice excessive noise and vibration when using your equipment. Therefore, it is important to replace the sprocket to prevent any additional damage to your equipment. Before you begin, ensure that the chain brake is engaged for your safety. Remove the cover on the chainsaw, and pull out the cutting chain and guide bar. Use a sprocket wrench to remove the old sprocket, position the new sprocket onto the crankshaft and secure it with the retaining nut. Each sold individually.