Murray String Trimmer Parts

Primer and Hose Assembly – Part Number: 791-683974B

Your Price

$21.79

Murray String Trimmer Primer and Hose Assembly

PartSelect Number PS10014772

Manufacturer Part Number 791-683974B

This manufacturer-certified primer and hose assembly includes the primer bulb, the primer bulb housing, and the fuel line. Any or all of the clear plastic parts in this assembly may experience wear and tear over time that cause fuel to leak due to cracking or blockages. If they are not functioning, these parts will fail in their function of supplying fuel from the tank to the carburetor. This is an easy repair, which can be made by identifying the location of the parts, between the fuel tank and the carburetor, and reinstalling them with no special tools required. When installing, make sure the fuel lines are tight to prevent leaks and fire hazards.

Fixes these symptoms

Will Not Start
See more...

Cutting Head Assembly – Part Number: 753-08169

Your Price

$13.29

Murray String Trimmer Cutting Head Assembly

★★★★★

1 Review

PartSelect Number PS10009816

Manufacturer Part Number 753-08169

Air Cleaner Filter – Part Number: 791-180350B

Your Price

$10.10

Murray String Trimmer Air Cleaner Filter

PartSelect Number PS10013535

Manufacturer Part Number 791-180350B

The manufacturer-certified Air Cleaner Filter is a grey foam filter used to prevent debris and dirt from entering the carburetor and engine, causing damage. Installation is rated as "Easy". This filter may become clogged and cause the engine to run rough due the restricted air flow, at which time the filter should be replaced. This filter is placed inside the air cleaner housing.

Clutch Assembly, Small – Part Number: 753-05860

Your Price

$24.60

Murray String Trimmer Clutch Assembly, Small

★★★★★

2 Reviews

PartSelect Number PS9303676

Manufacturer Part Number 753-05860

This clutch assembly is a genuine OEM replacement kit for outdoor lawn equipment. The kit includes the clutch drum, clutch, clutch washer, and screw. The clutch assembly transfers power from the engine to the cutting attachment which allows you to operate the equipment. Over time, the clutch assembly may malfunction due to normal wear and tear or accidental damage. If the small clutch assembly fails, the engine will likely stall, and the cutting attachment will not be able to engage. To remove the clutch assembly, first bind the piston to prevent it from rotating. You can do this by removing the spark plug and inserting a length of rope into the cylinder with a few inches remaining outside. Remove the clutch cover and use a clutch removal tool to remove the nut that secures the assembly. Pull the old assembly from the crankshaft and position the new assembly in its place, ensuring it is securely fitted.

Nut, 1/4C Hex Flange Lock – Part Number: 703233

Your Price

$4.99

Murray String Trimmer Nut, 1/4C Hex Flange Lock

PartSelect Number PS9999572

Manufacturer Part Number 703233

Installation Instructions

John from OCEAN ISL BCH, NC

Changed mandrel bad bearings

Took deck out, removed blade and mandrel greased all three mandrels changed belt re installed took 30 minutes Read more...

Lawn Tractor Mandrel Housing – Part Number: 492574MA

Your Price

$56.62

Murray String Trimmer Lawn Tractor Mandrel Housing

★★★★★

1 Review

PartSelect Number PS8982851

Manufacturer Part Number 492574MA

This mandrel housing is for lawn tractors. Mandrel housing houses the shaft that spins the blade. Wear work gloves to protect your hands when installing this part.

Carburetor O-Ring – Part Number: 753-06185

Your Price

$3.99

Murray String Trimmer Carburetor O-Ring

PartSelect Number PS10009589

Manufacturer Part Number 753-06185

Your Price

$4.99

Murray String Trimmer Throttle Cable

PartSelect Number PS16422452

Manufacturer Part Number 746-05231

Your Price

$7.36

Murray String Trimmer Throttle Cable

★★★★★

1 Review

PartSelect Number PS9118300

Manufacturer Part Number 753-06188

Installation Instructions

William from PALMETTO, FL

Carburetor replacement

Removed 2 screws securing the air cleaner and carburetor to the engine using a T25 Torx driver. then removed the throttle cable from the carb.Then removed the o ring gasket from the engine and replaced with a new one and replaced the carb etc. Primed it and fired it up.Runs just like new. Read more...