Models > Y6010-WK

Y6010-WK (Type 0) DeVilbiss Generator - Overview

Sections of the Y6010-WK

[Viewing 3 of 3]
Miscellaneous Parts Diagram and Parts List for Type 0 DeVilbiss Generator
Miscellaneous Parts
Page A Diagram and Parts List for Type 0 DeVilbiss Generator
Page A
Page B Diagram and Parts List for Type 0 DeVilbiss Generator
Page B
Keep searches simple, eg. "belt" or "pump".
Drain Valve – Part Number: N286039
Drain Valve
PartSelect #: PS10049094
Manufacturer #: N286039
$4.99
  In Stock
Cord Power ST 14GA 1 – Part Number: D26615
Cord Power ST 14GA 1
PartSelect #: PS10044333
Manufacturer #: D26615
$34.85
  In Stock
Hose Clamp – Part Number: CAC-1206-1
Hose Clamp
PartSelect #: PS10043561
Manufacturer #: CAC-1206-1
$3.99
  In Stock
Tube Seal – Part Number: N044359
Tube Seal
PartSelect #: PS10049061
Manufacturer #: N044359
$4.99
  In Stock
Con Rod Assembly – Part Number: N036518
Con Rod Assembly
★★★★★
★★★★★
(1)
PartSelect #: PS10049057
Manufacturer #: N036518
$39.28
  In Stock
Timing Belt – Part Number: AC-0815
Timing Belt
PartSelect #: PS10042429
Manufacturer #: AC-0815
$23.06
  In Stock
Head Gasket – Part Number: Z-D24819
Head Gasket
PartSelect #: PS10054596
Manufacturer #: Z-D24819
$19.16
  In Stock
Screw #10-24X.875 HH – Part Number: SSF-995
Screw #10-24X.875 HH
PartSelect #: PS10050728
Manufacturer #: SSF-995
$3.99
  In Stock
Head UMC – Part Number: CAC-1196
Head UMC
PartSelect #: PS10043555
Manufacturer #: CAC-1196
$17.73
  In Stock
Gauge 200PSI .125NPT – Part Number: Z-D27212
Gauge 200PSI .125NPT
PartSelect #: PS10054614
Manufacturer #: Z-D27212
  No Longer Available
Assembly Fastener – Part Number: ACG-408
Assembly Fastener
PartSelect #: PS10042508
Manufacturer #: ACG-408
$3.99
  In Stock
Isolator Pump – Part Number: D25731
Isolator Pump
PartSelect #: PS10044313
Manufacturer #: D25731
$3.99
  In Stock
View More
Back to Top

Questions And Answers for Y6010-WK

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Back to Top

Common Symptoms of the Y6010-WK

[Viewing 1 of 1]
Air leak
Fixed by
these parts
Fixing Fixing
Show All
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Worn piston rod and sleeve
Disassemble plastic housing around compressor unit using appropriate tools. Remove the four bolts from the compressor head using a 5/16 nut driver. Carefully remove head assembly including airline. Remove bolt through rod bearing with Allen wrench.

Reassemble with new rod and piston assembly. Best to use blue locktite on bolt through rod bearing when reassembling. Make sure to torque all bolts to specs listed.
Read less
Parts Used:
Con Rod Assembly
  • Donald from BRYAN, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top