Enter the code DIYDAD10 at checkout to apply your discount. Discount will be applied at checkout when the code is entered & applies to all parts. Cannot be combined with any other coupon or special offer & cannot be applied to a previously placed order. Not valid toward tax or shipping & handling. Discount has no cash value. Discount expires on June 17 at 11:59pm EST.
You've Got 10% Off Your First Order!Save 10% with code at checkout *click to copy coupon code
This is an inlet valve for your washing machine. The inlet valve is an electrically controlled valve with a solenoid that opens and closes as needed, during the water filling cycle of the washing mach...
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installat...
This lid lock assembly is supplied by the original manufacturer for use in various models of top-load washing machines. The assembly includes the lid lock mechanism and the wiring harness. You can fin...
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to...
This lid hinge is a genuine OEM replacement part for your washing machine. This hinge is for the left side of your lid, although it is a good idea to replace btoh hinges at once. The hinge holds up th...
This drain pump is specially designed to fit in top load washing machines. It is responsible for removing water from the washer tub during the drain cycle and directing it to the household plumbing sy...
$168.46
In Stock
Questions And Answers for WTW8500DC5
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
11 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Brian
November 30, 2019
I was out of town for almost 4 months for work... when i came home i tried doing a load of laundry and my touchscreen will not work. it turns on but, i can not push any buttons or start a load of laundry. the display says 39
what should i do?
For model number WTW8500DC5
Hi Brian, sounds like a faulty control panel, I recommend unplugging and re plugging the unit back in, if still not working it may be a faulty control board. Thank you for your question and good luck with your repair!
Hello Crystal, we have researched your model and found that your washer is 5.3 cubic feet. We hope this information helps. Please submit a new question if you have any follow-up queries, we look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Shelli
July 15, 2023
My washer is given a E2 and an F6 code and will not work on any wash cycle but it does get power.What do I need to repair it.The washer has a steam cycle on it too.Serial number C91570535.Thank you for your help!
For model number WTW8500DC5
Hi Shelli, Thank you for writing. This error code indicates there is a communication fault between the main control board and the washer motor. We suggest check all the wiring between the two components. If there is no obvious damage, you can use a multimeter to test the connections. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Rush
March 9, 2024
Washer making grinding sound when agitating
For model number WTW8500DC5
Hi Rush, thank you for reaching out. We have found that the issue is because of worn out washer clutch kit, part number PS10060062. You may need to replace it to fix the issue. Good luck with your repair!
Hi Zach, thank you for your question. Based on our understanding of the issue, first, we would recommend making sure that the load is balanced inside the tub and the washer is level. If that is not causing the issue, then you may need to check the stator, part number PS11769960, as it is most likely dusty or worn out and may need to be replaced. We hope this helps!
1.) disconnect power to your washer. Turn off water supply and disconnect from the washer.
open the washer top and remove plastic cap from the wash plate
2.) using 7/16 socket, remove bolt from the wash plate. If you can't remove it with a socket , I recommend using impact wrench.
3.) remove wash plate
... Read more( you might need to spray penetrating oil or wd40 inside the bolt hole to loosen it. Check to make sure the wash plate gear grooves are not worn down, if they are, replace it.
4.) using your Maytag specific spaner nut wrench, remove the spaner nut from the shaft of the gear case. This should be right underneath where the wash plate was. If you can't turn it by hand , use a rubber mallet or hammer to encourage it.
5.) some people remove the wash basket at this point. I don't think it is necessary.
6.) close your washing machine. Tape the top closed to keep it from flying open. Tilt your washer back and prop it up where you have access to the underside of the washing machine.
7) remove motor rotor bolt and pull rotor off of the motor.
8.) disconnect the two wire connectors that supply power to motor. using a socket, remove bolts that are keeping motor attached to the gear case.
9.) Now that the gear case is all the is remaining on the underside, you can remove the 4 bolts that are holding the gear case to the washer. Now try to pull gear case out.
10.) if gearcase will not pull out, lower washer back to upright position. Spray penetrating oil or wd40 around the shaft of the gearcase and allow it to sit for 5-10 minutes. Using a hammer, lightly tap on the shaft of the gearcase and it should now fall out. ( you might have to apply penetrating oil again, or apply more force with the hammer.
11.) reinstall motor to new gearcase. Insert new gear case to the washer. Reinstall bolts and reconnect power supply wires.
12. ReInstall spaner nut inside the washer, reinstall wash plate.
As women, myself and my daughter completed this fairly simple repair. The replacement washer plate was top quality and included the washplate replacement screw. Additionally, we purchased a tube of lock tight to further secure bolt placement. The most difficult part of the repair is to disengage old screw and securely replace with new one
... Read more. Very pleased with fast delivery Excellent customer service and top quality part. Thanks
