Enter the code DIYDAD10 at checkout to apply your discount. Discount will be applied at checkout when the code is entered & applies to all parts. Cannot be combined with any other coupon or special offer & cannot be applied to a previously placed order. Not valid toward tax or shipping & handling. Discount has no cash value. Discount expires on June 17 at 11:59pm EST.
You've Got 10% Off Your First Order!Save 10% with code at checkout *click to copy coupon code
This drive hub kit (part number W10528947VP) is for washers.
Drive hub kit W10528947VP connects the spin basket to the spin shaft that spins the basket. The kit may include multiple parts; refer to...
$34.00
In Stock
Order within the next 3 hrs and your part ships today!
This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the spl...
$54.48
In Stock
Order within the next 3 hrs and your part ships today!
This is lid lock designed for use within various washing machines. This lid lock, also known as a latch assembly, is used to secure the lid of your washing machine during the washing cycle. If your wa...
$139.49
In Stock
Order within the next 3 hrs and your part ships today!
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
$8.02
In Stock
Order within the next 3 hrs and your part ships today!
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installat...
$11.12
In Stock
Order within the next 3 hrs and your part ships today!
This 6-pin shift actuator is an authentic OEM part supplied directly by the manufacturer for use in washing machines. The shift actuator is responsible for controlling the movement of the washer trans...
$66.39
In Stock
Order within the next 3 hrs and your part ships today!
This is a lid strike for various models of top-load washing machines. Lid strikes are designed to engage with the lid switch and communicate to the control board that the washer can start. If your was...
$20.67
In Stock
Order within the next 3 hrs and your part ships today!
This is an inlet valve for various washing machines. Inlet valves are responsible for opening and closing as needed, to allow water to enter the washer during the washing cycle. This inlet valve featu...
$77.50
In Stock
Order within the next 3 hrs and your part ships today!
Questions And Answers for WTW4850HW1
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
7 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bill
August 20, 2022
The washer has power but the fill/sense lite keeps flashing. I unplugged it waited 30 minutes and no change and the lock button keeps engaging the releases. Some times will start to fill but then stops and the light flashes. Now a side note I just moved the washer from Clearwater to my home. I ran into two heavy rain storms. could that be part of the problem.
thanks
Bill Hartley
For model number WTW4850HW1
Hello Bill, thank you for your question. To fix your whirlpool washer sensing light flashing, reset the appliance. Access the technical datasheet from the console to get the error code. Refer to your instruction manual to troubleshoot/resolve the error. Replace parts if faulty, but first, check for blockages in drain hose or pump. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Jim
February 7, 2024
Can an agitator be installed on this model?
For model number WTW4850HW1
Hi Jim, Thank you for reaching out. Researching this model it only comes equipped with a Washplate, not an Agitator. Thank you for asking!
Water flows under washer onto floor, during first spin cycle.
For model number WTW4850HW1
Hello Victoria, Thank you for the question. This indicates it is leaking while it drains. We suggest checking the Tub to Pump Hose and the Drain Pump for damage. We hope this helps!
My washer stops when it goes from wash to rinse. Rinse button just flashes and nothing happens
For model number WTW4850HW1
Hello Russell, thank you for contacting us. Please check the drain pump, part number PS11770076, and ensure that the machine is draining properly. If the washer is draining properly, the issue is probably related to a defective control board, part number PS16221218. It manages the washer's functions such as filling, washing, draining, and spinning. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
The washer does the whole cycle but someone still soaked the clothes when it’s done. I don’t think it’s spinning.
For model number WTW4850HW1
Hello Jacob, thank you for the question. Based on our understanding of the issue, we would suggest replacing the drive clutch kit, part number PS10057144. It attaches to the drive belt and rotates the spin basket drive shaft. We hope this solves your problem!
ordered hub and it shipped quickly. I was able to put the hub in place and screw the screws in. you want to tighten them down slowly and go around to each screw tightening a little at a time so you don't break the hub. as you tighten the screws down the hub slides down flush. its impossible to just push the hub on with your hand. Buttoned
... Read more it back up and got caught up on laundry. good day when the washer is fixed.
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
