Enter the code DIYDAD10 at checkout to apply your discount. Discount will be applied at checkout when the code is entered & applies to all parts. Cannot be combined with any other coupon or special offer & cannot be applied to a previously placed order. Not valid toward tax or shipping & handling. Discount has no cash value. Discount expires on June 17 at 11:59pm EST.
You've Got 10% Off Your First Order!Save 10% with code at checkout *click to copy coupon code
This is a pulsator cap for various models of Samsung washing machines. This metal cap is designed to fit over the wash plate and agitator mounting bolt, ensuring clothes do not get caught on it during...
This is a water inlet valve designed for Samsung washing machines. Water inlet valves are used to control the hot and/or cold water going into the washing machine, and if it is broken or damaged can c...
This adjustable leg, also known as a levelling leg, is a genuine OEM part supplied by Samsung for use with washing machines. The leg supports the washing machine by ensuring that it is level and balan...
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dwaina
January 27, 2020
If i don't use the l shape hose that comes with washer, will it cause the machine to shoot an error code. The washer wont fill with water. I checked for kinks and i cleaned the water filter where the hose attaches. I think the error code is 4e. What else can i check
For model number WA48H7400AW
Hello and thank you for writing.
The 4E (4C) error code indicates that the washing machine has detected a problem with the water supply. The most common reason for this error is a blocked or kinked water supply hose or a faulty water inlet valve you should check the part(s) for signs of damage, and replace it as needed. Please see the part links related to this question just beneath this answer. We hope this helps. Please contact us anytime if you require further assistance.
Shut off water and electrical supply to appliance, take water supply hoses off to allow for proper access to back of machine. Take off back panels of appliance. Disconnect two hoses from pump. Take out two screws which attach pump to washer body. Detach wiring which connects pump to control unit ( that takes a little time). Install p
... Read moreump in designated location, connect hoses, connect wiring to control unit, connect appliance to powere source, test run to make sure everything works properly, make final detailed wire connection Pump to control unit, install back panels, Connect water supply hoses .....and be proud of yourself!
Though I could hear and feel the drain pump running, the washer would not drain. This model does not have a filter for the drain pump. I lowered the discharge hose from the stand up pipe on the wall, and lowered it to the floor. Water ran right out, so no blockage in the drain system. After removing the inlet and outlet hoses to the pump,
... Read more a quick inspection showed the impeller on the motor was off the shaft and flopping around. Bingo, motor runs but cant pump. Ordered from Partselect and received in ONE DAY. I really didn't want to go back to it that soon, but they certainly did their part. Ha. Thank you all. Greg