Enter the code DIYDAD10 at checkout to apply your discount. Discount will be applied at checkout when the code is entered & applies to all parts. Cannot be combined with any other coupon or special offer & cannot be applied to a previously placed order. Not valid toward tax or shipping & handling. Discount has no cash value. Discount expires on June 17 at 11:59pm EST.
You've Got 10% Off Your First Order!Save 10% with code at checkout *click to copy coupon code
This is a water inlet valve designed for Samsung washing machines. Water inlet valves are used to control the hot and/or cold water going into the washing machine, and if it is broken or damaged can c...
This adjustable leg, also known as a levelling leg, is a genuine OEM part supplied by Samsung for use with washing machines. The leg supports the washing machine by ensuring that it is level and balan...
The pump coin trap protects the pump from damage by coins or other small objects in the drain water.
$53.78
In Stock
Questions And Answers for WA45K7600AW
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jess
March 1, 2023
Washer stopped at the rinse and spin cycle, no codes and drum full of water.
For model number WA45K7600AW
Hello Jess, thank you for contacting us. Firstly, you should check your drain hose and drain pump. Any obstructions in the drain hose or drain pump can cause the water not to drain and stop the washer mid-cycle. Replace the drain pump, part number PS12742622, if it is faulty. If these parts are okay, you may need to check the door lock, part number PS11771585, and water level pressure switch, part number PS4217081. If it does not help you will need to replace your washer control board, part number PS11771595. We hope this information is useful!
Shut off water and electrical supply to appliance, take water supply hoses off to allow for proper access to back of machine. Take off back panels of appliance. Disconnect two hoses from pump. Take out two screws which attach pump to washer body. Detach wiring which connects pump to control unit ( that takes a little time). Install p
... Read moreump in designated location, connect hoses, connect wiring to control unit, connect appliance to powere source, test run to make sure everything works properly, make final detailed wire connection Pump to control unit, install back panels, Connect water supply hoses .....and be proud of yourself!
Though I could hear and feel the drain pump running, the washer would not drain. This model does not have a filter for the drain pump. I lowered the discharge hose from the stand up pipe on the wall, and lowered it to the floor. Water ran right out, so no blockage in the drain system. After removing the inlet and outlet hoses to the pump,
... Read more a quick inspection showed the impeller on the motor was off the shaft and flopping around. Bingo, motor runs but cant pump. Ordered from Partselect and received in ONE DAY. I really didn't want to go back to it that soon, but they certainly did their part. Ha. Thank you all. Greg
Tipped the washer up on a couple of chairs. Pulled the motor apart in three pieces and replaced the Hall Sensor. Error code lead me right to the problem and solution.
