Models > SRM-2601

SRM-2601 Echo Trimmer - Overview

Sections of the SRM-2601

[Viewing 7 of 7]
Keep searches simple, eg. "belt" or "pump".
Primer Pump – Part Number: 12318140630
Primer Pump
PartSelect #: PS8858167
Manufacturer #: 12318140630
The Primer Pump, aka the Pump Bulb, is a clear, individually sold, plastic part, sourced from the original equipment manufacturer. It has an Outer Diameter of 0.616 Inches, 15.66mm and is 0.558 Inches...
$4.98
  In Stock
Fuel Tank Vent – Part Number: A356000031
Fuel Tank Vent
★★★★★
★★★★★
(1)
PartSelect #: PS9183121
Manufacturer #: A356000031
This a a genuine OEM replacement check valve for your small engine. It is also known as a fuel tank vent. You may need to replace this part if you are noticing debris or dirty oil in the reservoir. Ma...
$7.63
  In Stock
Filter, Fuel – Part Number: A369000460
Filter, Fuel
★★★★★
★★★★★
(2)
PartSelect #: PS11826309
Manufacturer #: A369000460
The Fuel Filter is a white and silver, individually sold, steel part. It reuires pliers to install and its installation is rated as Easy. The part attaches inside of the fuel tank and is used to cle...
$8.60
  In Stock
Filter-Air – Part Number: 13031051830
Filter-Air
PartSelect #: PS8862436
Manufacturer #: 13031051830
$6.83
  In Stock
Trigger-Throttle – Part Number: 17801052130
Trigger-Throttle
★★★★★
★★★★★
(1)
PartSelect #: PS8901994
Manufacturer #: 17801052130
$5.19
  In Stock
Spark Plug-Bpm-7Y – Part Number: 99944500071
Spark Plug-Bpm-7Y
PartSelect #: PS9313722
Manufacturer #: 99944500071
This spark plug is sourced from the original equipment manufacturer. It is a small device in the engine cylinder head which is responsible for creating the spark that ignites the fuel in the engine an...
  No Longer Available
Nut-Lh Thread – Part Number: 90051100010
Nut-Lh Thread
PartSelect #: PS9308872
Manufacturer #: 90051100010
The m10 Left Hand Thread Nut is a 10mm, gold metal part, sold individually. This nut is a "reverse thread". It requires a wrench or socket set to install, and installation is rated as "Easy". Use this...
$5.19
  In Stock
Split Pin 2x22 – Part Number: 90030020022
Split Pin 2x22
PartSelect #: PS9162863
Manufacturer #: 90030020022
The Cotter Pin (or Split Pin) is a 2x22mm silver metal part, sold individually. It is rated as "Easy" to install, and installation will require a set of pliers. It can be attached in various locations...
$4.99
  In Stock
Spark Arrester Screen – Part Number: 14586240630
Spark Arrester Screen
PartSelect #: PS8867212
Manufacturer #: 14586240630
Also referred to as a Spark Arrester, this Spark Arrester Screen is an authentic OEM replacement part that is not part of a kit or assembly. It is made of metal and sold individually. The purpose of t...
$5.19
  In Stock
Clip – Part Number: V490001230
Clip
PartSelect #: PS10053748
Manufacturer #: V490001230
Used in over 150 models of outdoor power equipment, this clip is commonly used to clip fuel lines or other hoses/tubes in place. It is sold individually, not as part of a kit or assembly, made of meta...
$4.99
  In Stock
Screw-5x16 – Part Number: 90023805016
Screw-5x16
PartSelect #: PS9153138
Manufacturer #: 90023805016
$4.99
  In Stock
Nut 5 – Part Number: 90050000005
Nut 5
PartSelect #: PS9148697
Manufacturer #: 90050000005
This OEM nut is a 5mm, gold, metal nut, which is sold individually. It can be installed with a Wrench or Socket and Torque Wrench by torquing to the manufacturer specifications. This nut is used to se...
$4.99
  In Stock

Questions And Answers for SRM-2601

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Replace clogged fuel filter.
Thru fuel cap, insert copper wire with hook formed on end. Fish around until you grab the fuel line. Pull the fuel line and filter thru the fuel fill neck.
Pull off old filter and replace with new. Push back into fuel tank & be done.
Parts Used:
Filter, Fuel
  • Keith from NORWOOD, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
20 of 32 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Echo trimmer had narrow shield. Bought wider one which reduced rocks and debris
Easiest repair ever. Turn the trimmer upside down so you can access the string assembly. Find the small hole in the shaft beneath the string assembly and insert a heavy gauge nail into it to hold the shat in place. Turn the string assembly counterclockwise until it comes off. Lift off the round metal piece that was under the string assembly.Find the 3 screws holding the shield in place and unscrew them. Pull the shield off. Install the new one in reverse order. I used the original hex screws as the new ones were philips head. Hex worked perfectly. I was amazed how easy thus was to do.
Parts Used:
Shield Assembly.
  • Robert from COEUR D ALENE, ID
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
3 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!