Models > RY252CS

RY252CS Ryobi Trimmer - Overview

Models starting with RY252CS

Keep searches simple, eg. "belt" or "pump".
Spool Retainer - Black – Part Number: 308042002
Spool Retainer - Black
★★★★★
★★★★★
(1)
PartSelect #: PS9937839
Manufacturer #: 308042002
This spool retainer is sourced from the equipment manufacturer for use in trimmers. It is a plastic knob, measuring 2 inches in diameter, with a threaded metal bolt in the center. The retainer has a r...
  No Longer Available
Crank Handle Assembly – Part Number: 312283001
Crank Handle Assembly
PartSelect #: PS16325274
Manufacturer #: 312283001
$3.99
  Special Order
Airbox Cover – Part Number: 308649003
Airbox Cover
PartSelect #: PS11857338
Manufacturer #: 308649003
This airbox cover, also known as an air filter cover, is an authentic manufacturer replacement cover for trimmers. It has one label on the front side which states the starting instructions for the tri...
  No Longer Available
Curved Shaft Assembly – Part Number: 307486001
Curved Shaft Assembly
★★★★★
★★★★★
(1)
PartSelect #: PS11857289
Manufacturer #: 307486001
  No Longer Available
Hanger Cap – Part Number: 518019002
Hanger Cap
PartSelect #: PS9964412
Manufacturer #: 518019002
  No Longer Available
Upper Housing – Part Number: 530001004
Upper Housing
★★★★★
★★★★★
(1)
PartSelect #: PS16352252
Manufacturer #: 530001004
$3.99
  Special Order
Bump Knob (Green) – Part Number: 530455002
Bump Knob (Green)
PartSelect #: PS16353017
Manufacturer #: 530455002
$3.99
  Special Order
Spring – Part Number: 678749001
Spring
PartSelect #: PS9996189
Manufacturer #: 678749001
  No Longer Available
Switch – Part Number: 760961002
Switch
PartSelect #: PS11858949
Manufacturer #: 760961002
This OEM switch is used on a variety of different lawn equipment models and is sold individually. This switch is used to turn your lawn equipment on and off, so if your equipment is either not turning...
$3.99
  Special Order
Lower Housing – Part Number: 530366001
Lower Housing
★★★★★
★★★★★
(1)
PartSelect #: PS16353012
Manufacturer #: 530366001
$4.99
  Special Order
Boom Clamp Assembly – Part Number: 315386001
Boom Clamp Assembly
PartSelect #: PS16325666
Manufacturer #: 315386001
$10.35
  Special Order
Fuel Filter – Part Number: 310976001
Fuel Filter
PartSelect #: PS9939472
Manufacturer #: 310976001
This fuel filter is a genuine OEM part that is compatible with various lawn equipment models and is sold as an individual part. Fuel filters are used to remove dirt and debris from fuel entering the c...
$4.99
  Special Order

Common Symptoms of models starting with RY252CS

[Viewing 1 of 1]
Engine revs but trimmer head will not turn
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
No spark
It didn't, After 2 new sparkplugs 2 coils iand a fly wheel and coil set using a business card. And is killed switch disconnected? Still no spark and I don't have the clue and I'm amechanic.
Parts Used:
Flywheel
  • Henry J from CHESNEE, SC
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    30 - 60 mins
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The trimmer would not start.
Pulled trimmer apart, found plastic shims on coil broken. This allowed the coil to drop onto the flywheel, which stopped the crank and in turn sheared the flywheel key. If the key shears it will throw the timing off and the engine will not start. The key is made into the flywheel so it had to be replaced. The trimmer runs again.
Parts Used:
Flywheel
  • RAYMOND from El Dorado, AR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old curved shaft for Ryobi had seized-up and wouldn't turn
I have been using string trimmers for over 40 years now, doing the grounds work at a small motel, and this is the best combination I have found!

I have the new 40V battery carbon fiber shaft model, but I use the curved shaft. I have stacked stone walls and many obstacles to get around, and the curved shaft works best. But, Ryobi sends their straight shaft with the new trimmer, and it turns in the opposite direction (counter clockwise) and is hard for me to get into the areas I need.

To correct this, I use the Oregon brand Gatorhead, which fits on the Ryobi with no modiification (easy) and the line comes in spiral discs which can work for either direction of trimmer head to dispense effortlessly. Now, I have a new curved shaft on a new trimmer with the head turning in the clockwise direction.

This item has been discontinued, so get it when you find one, and stock up on line discs too!

https://www.oregonproducts.com/en/gator%c2%ae-speedload%e2%84%a2-trimmer-head-pro-sm/p/24-250
Parts Used:
Curved Shaft Assembly
  • Mark from MANCHESTR CTR, VT
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Wrench (Adjustable)
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!