Parts That Fix KitchenAid Dishwasher KUDS01FLSS6 Will Not Start
Will Not Start is a commonly reported symptom for the KUDS01FLSS6 KitchenAid Dishwasher, and we have put together a full guide on how to fix this. This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your KUDS01FLSS6 KitchenAid Dishwasher that will fix Will Not Start. We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!
When replacing these fuses the wire harness must be replaced as well. It is located in the control panel. The harness is included with this part now.
This dishwasher door switch will shut your dishwasher off when the door is opened.
This part acts as as safety mechanism that keeps the dryer from overheating. Once the dryer temperature reaches a certain point, this part will shut down power to the heating element.
This part is located in the control panel. Note: Thermal fuse is NOT included with board.
The circulation pump and motor is located near the bottom of the dishwasher. The part functions by spinning the impeller of the circulation pump, which is used to move the water through the spray arms during the wash cycle. Before you begin this repair, it is recommended that you pull your dishwasher out of the cabinet, so you can tip the dishwasher to one side and gain better access to the circulation pump and motor. Be sure to disconnect the power source and the water source to the dishwasher before you begin this repair. To complete this repair you will need a 1/4 inch nut driver and a 3/8 inch nut driver.
Black in color.
This would be the main "brains" of the appliance which is activated by selecting a certain function with the touchpad.
This dishwasher heating element is not designed to heat the water that enters it, but is designed to maintain the heat of the water that enters the dishwasher. It is located on the bottom of the dishwasher.
The rubber washer is a part which is specific to dishwashers and should not be substituted by a similar part. It works with the heating element to seal the receptacle opening where the heating element is attached. The rubber washer is used to prevent water leaking from your dishwasher during its cycle. Before making any repairs to your dishwasher make sure that you disconnect the power by finding the breaker for the dishwasher, and turning it off. The tools you will need to complete this repair include an adjustable wrench, and a 1/4 inch nut driver. This specific rubber washer is sold individually.
As per the factory, this is an updated latch and you will need to order the strike as well - as per your model number.
This part is used to regulate water temperature when certain cycles or options are selected. The thermistor is part of the sensor mounted in the tub.
*** This part no longer includes the Chopper Assembly as per the Manufacturer *** The part functions by spinning the impeller of the circulation pump, which is used to move the water through the spray arms during the wash cycle.
This part is mounted on the top of the dishwasher.
This part is used to connect the electronic control board and the touchpad control board.
This part is a door balance link kit, also sometimes known as door cable or door spring cable kit, that helps support the door as it opens and closes by connecting to the dishwasher door hinges. The kit includes two door balance links and two door balance mounts with wheels, which will replace both the left and right sides. The only tool needed is a 5/16 nut driver. Before removing the existing kit, take note of how the door balance link kit is assembled for a smooth replacement process. It is recommended to check the door springs in case they need to be replaced as well.
250 max Volt, 23.5 MFD.
Includes power cord and all necessary parts needed for complete installation of cord.
This chopper assembly chops up/mince the food particles to prevent from clogging the dishwasher pump.