Models > KSGG700ESS1 > Symptoms > Oven is too hot

Parts That Fix KitchenAid Range KSGG700ESS1 Oven is too hot

Oven is too hot is a commonly reported symptom for the KSGG700ESS1 KitchenAid Range, and we have put together a full guide on how to fix this. This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your KSGG700ESS1 KitchenAid Range that will fix Oven is too hot. We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!

1 SENSOR
Fixes Symptom 69% of time
SENSOR – Part Number: W10833885
★★★★★
★★★★★
4 Reviews

Rated by 2 customers 

  

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.   

This is a manufacturer-made oven temperature sensor for various models of range. This sensor is designed to accurately detect the internal temperature of your oven and communicate with the control board to control the level of heat inside of it. Over time and through extended exposure to hot temperatures, this sensor can fail and cause your oven to have issues heating or staying at a consistent heat level, at which point it needs to be replaced. This sensor features a wire harness to connect to the control board of the oven, as well as two mounting screws to install it. Replacing this sensor is easy and only requires a screwdriver to unthread it from the lower portion of your oven. This sensor is sold on its own, and does not come with any other necessary parts, like its securing screws.

$ 125.82
  In Stock
PartSelect Number PS11726314
Manufacturer Part Number W10833885

Customer Repair Stories

Oven temperature was WAY off, sometimes 50 degrees.

Turned the breaker off. Removed the racks, pulled the oven out and removed the back. Disconnected and unscrewed the old sensor from the back, connected and screwed in the new one. Returned the racks and slid the oven back in.

The only remotely challenging part was disconnecting the old sensor. I had to figure out where to press with the flat screwdriver to get it to release.

I had found a good YouTube video and didn't use the app.
Read less
  • Sarah from Raleigh, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
2 Range Cooling Fan
Fixes Symptom 31% of time
Range Cooling Fan – Part Number: W11107275
★★★★★
★★★★★
4 Reviews

Rated by 1 customer 

  

Really Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.   

Whirlpool Genuine OEM W11107275 Range Cooling Fan Motor. Possible Repair Solution For: Will not start, takes too long to cool Please Note: This is intended as a guideline only, as other items can cause the same symptoms. This part works with the following brands: Whirlpool, Roper, Admiral, Maytag, Hardwick, Jenn-Air, Estate, Magic Chef, Crosley, Inglis, Norge, Modern Maid, Amana, Kenmore, KitchenAid, Caloric

$ 120.93
  In Stock
PartSelect Number PS12347171
Manufacturer Part Number W11107275

Customer Repair Stories

FE80 Error, blower motor underperforming

Remove cover under controls, unscrew rangetop (front only). Motor on right side of oven directly under rangetop detaches with 3 screws and remove with care. Swap foam seal to new motor and install. May require contact cement to attach seal to new part.
  • Richard from EUGENE, OR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Back to Top