KRB300A ((A1)) Kawasaki Leaf Blower / Vacuum - Overview

Grommet,Fuel Tank

★★★★★

★★★★★

(2)

The Fuel Tank Grommet is a 1-inch, black, rubber part. It attaches to the fuel tank so you can run your fuel lines through it, and is rated as "Easy" to install by most of our customers. If worn or da... Add to cart

Clamp, Fuel Filter The fuel filter clamp, is a silver, individually sold, metal part, used to secure the fuel line to the fuel filter. It attaches to the fuel filter and if broken, typically due to fatigue or damage, it... Add to cart

Tube,3X5X182 This Fuel Line (3x5x182) is a 7.25-inch-long rubber part which is installed inside the fuel tank to the carburetor. It runs from inside of the fuel tank and attaches to the fuel filter inside of the t... Add to cart

Tube,3X6X90 The return fuel line is used to transfer fuel from the carburetor, back to the fuel tank. This fuel tube is designed for use with trimmers and is made of high-quality polymer and measures approximatel... Add to cart

Breather

★★★★★

★★★★★

(1)

The Breather allows air to enter the tank, so no vacuum is created as the fuel level drops, which would prevent the flow of fuel to the carburetor.It seals in the gas emissions and fuel at the same ti... Add to cart

Cap-Tank And Breather,Assembly The Fuel Tank Cap and Breather is an assembly made up of black plastic parts. You'll know if you need a new one if fuel is leaking, and this appears to be the source. This can happen due to normal we... Add to cart

Filter-Fuel This 2-cycle in-tank fuel filter is a component in your lawn equipment that ensures clean fuel reaches the engine by filtering out impurities and debris. It is made of durable metal and high-quality f... Add to cart

Element-Air Filter Add to cart

Starter-Recoil Add to cart

Cap-Assembly-Tank Add to cart

Pump-Priming Add to cart

Screw,4X14 Add to cart